A big collection of Unix/Linux 'find' command examples

Linux/Unix FAQ: Can you share some Linux find command examples?

Sure. The Linux find command is very powerful. It can search the entire filesystem to find files and directories according to the search criteria you specify. Besides using the find command to locate files, you can also use it to execute other Linux commands (grep, mv, rm, etc.) on the files and directories that are found, which makes find even more powerful.

In this article I’ll take a look at the most common uses of the find command.

(this space intentionally
left blank for that long
“table of contents” over
there -->)


Back to top

Abridged ‘find’ command examples

If you just want to see some examples and skip the reading, here are a little more than thirty find command examples to get you started. Almost every command is followed by a short description to explain the command; others are described more fully at the URLs shown:

basic 'find file' commands
find / -name foo.txt -type f -print             # full command
find / -name foo.txt -type f                    # -print isn't necessary
find / -name foo.txt                            # don't have to specify "type==file"
find . -name foo.txt                            # search under the current dir
find . -name "foo.*"                            # wildcard
find . -name "*.txt"                            # wildcard
find /users/al -name Cookbook -type d           # search '/users/al' dir

search multiple dirs
find /opt /usr /var -name foo.scala -type f     # search multiple dirs

case-insensitive searching
find . -iname foo                               # find foo, Foo, FOo, FOO, etc.
find . -iname foo -type d                       # same thing, but only dirs
find . -iname foo -type f                       # same thing, but only files

find files with different extensions
find . -type f \( -name "*.c" -o -name "*.sh" \)                       # *.c and *.sh files
find . -type f \( -name "*cache" -o -name "*xml" -o -name "*html" \)   # three patterns

find files that don't match a pattern (-not)
find . -type f -not -name "*.html"                                # find all files not ending in ".html"

find files by text in the file (find + grep)
find . -type f -name "*.java" -exec grep -l StringBuffer {} \;    # find StringBuffer in all *.java files
find . -type f -name "*.java" -exec grep -il string {} \;         # ignore case with -i option
find . -type f -name "*.gz" -exec zgrep 'GET /foo' {} \;          # search for a string in gzip'd files

5 lines before, 10 lines after grep matches
find . -type f -name "*.scala" -exec grep -B5 -A10 'null' {} \;
     (see https://alvinalexander.com/linux-unix/find-grep-print-lines-before-after-search-term)

find files and act on them (find + exec)
find /usr/local -name "*.html" -type f -exec chmod 644 {} \;      # change html files to mode 644
find htdocs cgi-bin -name "*.cgi" -type f -exec chmod 755 {} \;   # change cgi files to mode 755
find . -name "*.pl" -exec ls -ld {} \;                            # run ls command on files found

find and copy
find . -type f -name "*.mp3" -exec cp {} /tmp/MusicFiles \;       # cp *.mp3 files to /tmp/MusicFiles

copy one file to many dirs
find dir1 dir2 dir3 dir4 -type d -exec cp header.shtml {} \;      # copy the file header.shtml to those dirs

find and delete
find . -type f -name "Foo*" -exec rm {} \;                        # remove all "Foo*" files under current dir
find . -type d -name CVS -exec rm -r {} \;                        # remove all subdirectories named "CVS" under current dir

find files by modification time
find . -mtime 1               # 24 hours
find . -mtime -7              # last 7 days
find . -mtime -7 -type f      # just files
find . -mtime -7 -type d      # just dirs

find files by modification time using a temp file
touch 09301330 poop           # 1) create a temp file with a specific timestamp
find . -mnewer poop           # 2) returns a list of new files
rm poop                       # 3) rm the temp file

find with time: this works on mac os x
find / -newerct '1 minute ago' -print

find and tar
find . -type f -name "*.java" | xargs tar cvf myfile.tar
find . -type f -name "*.java" | xargs tar rvf myfile.tar
     (see https://alvinalexander.com/blog/post/linux-unix/using-find-xargs-tar-create-huge-archive-cygwin-linux-unix
     for more information)

find, tar, and xargs
find . -name -type f '*.mp3' -mtime -180 -print0 | xargs -0 tar rvf music.tar
     (-print0 helps handle spaces in filenames)
     (see https://alvinalexander.com/mac-os-x/mac-backup-filename-directories-spaces-find-tar-xargs)

find and pax (instead of xargs and tar)
find . -type f -name "*html" | xargs tar cvf jw-htmlfiles.tar -
find . -type f -name "*html" | pax -w -f jw-htmlfiles.tar
     (see https://alvinalexander.com/blog/post/linux-unix/using-pax-instead-of-tar)

On a related note, don’t forget the locate command. It keeps a database on your Unix/Linux system to help find files very fast:

locate command
locate tomcat.sh          # search the entire filesystem for 'tomcat.sh' (uses the locate database)
locate -i spring.jar      # case-insensitive search

If you know of any more good find commands to share, please leave a note in the Comments section below.

The remaining sections on this page describe more fully the commands just shown.

Back to top

Basic find command examples

This first Linux find example searches through the root filesystem ("/") for the file named Chapter1. If it finds the file, it prints the location to the screen.

find / -name Chapter1 -type f -print

On Linux systems and modern Unix system you no longer need the -print option at the end of the find command, so you can issue it like this:

find / -name Chapter1 -type f

The -type f option here tells the find command to return only files. If you don’t use it, the find command will returns files, directories, and other things like named pipes and device files that match the name pattern you specify. If you don't care about that, just leave the -type f option off your command.

This next find command searches through only the /usr and /home directories for any file named Chapter1.txt:

find /usr /home -name Chapter1.txt -type f

To search in the current directory — and all subdirectories — just use the . character to reference the current directory in your find commands, like this:

find . -name Chapter1 -type f

This next example searches through the /usr directory for all files that begin with the letters Chapter, followed by anything else. The filename can end with any other combination of characters. It will match filenames such as Chapter, Chapter1, Chapter1.bad, Chapter-in-life, etc.:

find /usr -name "Chapter*" -type f

This next command searches through the /usr/local directory for files that end with the extension .html. These file locations are then printed to the screen:

find /usr/local -name "*.html" -type f
Back to top

Find directories with the Unix find command

Every option you just saw for finding files can also be used on directories. Just replace the -f option with a -d option. For instance, to find all directories named build under the current directory, use this command:

find . -type d -name build
Back to top

Find files that don't match a pattern

To find all files that don't match a filename pattern, use the -not argument of the find command, like this:

find . -type f -not -name "*.html"

That generates a list of all files beneath the current directory whose filename DOES NOT end in .html, so it matches files like *.txt, *.jpg, and so on.

Back to top

Finding files that contain text (find + grep)

You can combine the Linux find and grep commands to powerfully search for text strings in many files.

This next command shows how to find all files beneath the current directory that end with the extension .java, and contain the characters StringBuffer. The -l argument to the grep command tells it to just print the name of the file where a match is found, instead of printing all the matches themselves:

find . -type f -name "*.java" -exec grep -l StringBuffer {} \;

(Those last few characters are required any time you want to exec a command on the files that are found. I find it helpful to think of them as a placeholder for each file that is found.)

This next example is similar, but here I use the -i argument to the grep command, telling it to ignore the case of the characters string, so it will find files that contain string, String, STRING, etc.:

find . -type f -name "*.java" -exec grep -il string {} \;
Back to top

Acting on files you find (find + exec)

This command searches through the /usr/local directory for files that end with the extension .html. When these files are found, their permission is changed to mode 644 (rw-r--r--).

find /usr/local -name "*.html" -type f -exec chmod 644 {} \;

This find command searches through the htdocs and cgi-bin directories for files that end with the extension .cgi. When these files are found, their permission is changed to mode 755 (rwxr-xr-x). This example shows that the find command can easily search through multiple sub-directories (htdocs, cgi-bin) at one time:

find htdocs cgi-bin -name "*.cgi" -type f -exec chmod 755 {} \;
Back to top

Running the ls command on files you find

From time to time I run the find command with the ls command so I can get detailed information about files the find command locates. To get started, this find command will find all the *.pl files (Perl files) beneath the current directory:

find . -name "*.pl"

In my current directory, the output of this command looks like this: 


That's nice, but what if I want to see the last modification time of these files, or their filesize? No problem, I just add the ls -ld command to my find command, like this:

find . -name "*.pl" -exec ls -ld {} \;

This results in this very different output:

-rwxrwxr-x 1 root root 2907 Jun 15  2002 ./news/newsbot/old/3filter.pl
-rwxrwxr-x 1 root root 336  Jun 17  2002 ./news/newsbot/tokenParser.pl
-rwxr-xr-x 1 root root 2371 Jun 17  2002 ./news/robonews/makeListOfNewsURLs.pl

The "-l" flag of the ls command tells ls to give me a "long listing" of each file, while the -d flag is extremely useful in this case; it tells ls to give me the same output for a directory. Normally if you use the ls command on a directory, ls will list the contents of the directory, but if you use the -d option, you'll get one line of information, as shown above.

Back to top

Find and delete

Be very careful with these next two commands. If you type them in wrong, or make the wrong assumptions about what you're searching for, you can delete a lot of files very fast. Make sure you have backups and all that, you have been warned.

Here's how to find all files beneath the current directory that begin with the letters 'Foo' and delete them.

find . -type f -name "Foo*" -exec rm {} \;

This one is even more dangerous. It finds all directories named CVS, and deletes them and their contents. Just like the previous command, be very careful with this command, it is dangerous(!), and not recommended for newbies, or if you don't have a backup.

find . -type d -name CVS -exec rm -r {} \;
Back to top

Find files with different file extensions

The syntax to find multiple filename extensions with one command looks like this:

find . -type f \( -name "*.c" -o -name "*.sh" \)

Just keep adding more "-o" (or) options for each filename extension. Here's a link to

Back to top

Case-insensitive file searching

To perform a case-insensitive search with the Unix/Linux find command, use the -iname option instead of -name. For example, if you want to search for all files and directories named foo, FOO, or any other combination of uppercase and lowercase characters beneath the current directory, use this command:

find . -iname foo

If you’re just interested in directories, search like this:

find . -iname foo -type d

And if you’re just looking for files, search like this:

find . -iname foo -type f
Back to top

Find files by modification time

To find all files and directories that have been modified in the last seven days, use this find command:

find . -mtime -7

To limit the output to just files, add the -type f option as shown earlier:

find . -mtime -7 -type f

and to show just directories:

find . -mtime -7 -type d
Back to top

A command to find large files on MacOS, Unix, and Linux

I just saw this find command at this URL that helps you find large files on MacOS, Unix, and Linux systems:

find / -type f -size +100000k -exec ls -lh {} \; | awk '{ print $9 ": " $5 }'

On a Mac there’s actually an easier way to do this:

  • Click the Apple icon, then select About This Mac
  • Click the Storage tab on the dialog that comes up
  • Click the Manage... button in that tab
  • When the next window comes up, click the Review Files button under the Reduce Clutter section

That brings up another window that gives you various ways to find large files on a MacOS system.

Back to top

More find command resources

If you’re just looking for a file by name, and you want to be able to find that file even faster than you can with the find command, take a look at the Linux locate command. The locate command keeps filenames in a database, and can find them very fast.

For more details on the find command, check out our online version of the find man page.

Also, if you have any favorite Linux and Unix find commands you’d like to share, please use the comment form below.

Back to top



I just had a problem with a Bugzilla installation (on an intranet), and finally gave up on trying to fix all the permission problems, and just made all the bugzilla subdirectories 775 like this:

find bugzilla -type d -exec chmod 775 {} \;

Here 'bugzilla' was a subdirectory of my current directory.

I've always been lazy in this situation and done something as follows. First, create a list of all the files you want to remove, putting that list into a file:

find mydir -mtime +63 > files-to-remove

Then follow this with a shell for loop, like this:

for i in `cat files-to-remove`
  rm $i

But a quick warning: I haven't tested that for syntax errors, but I think it's right.

But, even better, I've used find with xargs before to create large tar backup archives, and in the xargs man page docs I just saw these examples related to removing files. Hopefully these examples will help:


find /tmp -name core -type f -print | xargs /bin/rm -f
  Find  files  named  core in or below the directory /tmp and delete them.
  Note that this will work incorrectly if there are any filenames containing 
  newlines or spaces.
find /tmp -name core -type f -print0 | xargs -0 /bin/rm -f

  Find files named core in or below the directory /tmp and delete them, 
  processing filenames in such a way that file or directory names containing 
  spaces or  new-lines are correctly handled.

No matter, which approach, be careful, and try a test first (maybe using the echo command) to make sure it works was expected..

I'll add a new section to this article with this update, but to perform a case-insensitive search, use the -iname option instead of -name. So, to search for all files and directories named foo, FOO, or any other combination of uppercase and lowercase characters beneath the current directory, use this command:

find . -iname foo

In response to the second question, to search for directories with uppercase characters only I'd need to know a little more about what you're looking for, but something like this might help get you started:

find . -type d -name "[A-Z]*"

The -type d option tells find to just look for directories, and the wildcard pattern "[A-Z]*" says "Search for any directory whose name contains one or more uppercase characters."


Had just what I wanted and straight to the point


Was very helpful. Straight to the point.


Is there any way to set a "-quiet" type flag to ignore all the error lines? I get more "Permission denied" lines than I do results to my find query. I don't see anything in the man page. I thought maybe I could run the output through grep -v "Permission denied" but that fails to work.


Often I'd like to know exactly WHERE the files that get found reside. the -print (default) command only gives the file name. The -ls flag prints out a bunch of data, including size and full path. You can then use sed/awk (if you know how - I suck at this too) to pull out specific data from what find returns.

Another cool thing to do is run your find output through wc -l to count all the found files. e.g.:
find ~music -type f -iname *.mp3 | wc -l
will count all the mp3 files in the music user's home and subdirs.

There is a -[no]warn flag, though I've never used it. The problem with using grep in this case is that the errors are probably coming out of find on the STDERR stream instead of STDOUT, so you'll need to get rid of them something like this:

find ...your options here... 2> /dev/null

If you haven't used it before, the "2>" symbol lets you redirect STDERR output.


Thanks, you're right, I totally forgot to include an "ls" example. I'll try to add one here this morning. Usually I use ls with the -ld option, like this:

find . -name "foo" -exec ls -ld {} \;

I'll add this next. Thanks again.


Objective and minimalist. :-)
Thank you.


Thanks :)


Can someone help me in find files with multiple extensions like .sh or .c or .txt
for ex-
find . -name "*.(c|sh|txt)"


Can anyone help me to find a directory using "find command" and list the contents of that directory using ls command.

Eg. Suppose say I want to find the directory called "mosra" in the present workign directory. This directory may be present anywhere in the path and I want to list ONLY the directories present in that "mosra" directory.

Working Dir $ pwd


Working Dir $ find ./ -name mosra -type d

I tried this command
find ./ -name mosra -type d -printf %P\\n -exec ls {} \;
But it lists out file and directores both
What I want is to list out the ONLY directories in mosra directory above....

Please help me on this

If I understand the question, this should work:

find . -name mosra -type d -exec ls {} \;

However ... a problem with that command is that it's like issuing this command from the directory above the mosra directory:

ls mosra

That command will list all of the files in the mosra folder, which is probably what you're seeing. To eliminate the output of those filenames, add the -d flag to your ls command:

find . -name mosra -type d -exec ls -d {} \;

However, at this point, unless you want more detailed information about the mosra folder, such as an ls -l command, there's no point in using ls; just use this command:

find . -name mosra -type d

(If you're on an older Unix system you may also need the -print argument.)

I hope that helps.

Hello Alvin,

Thank you very much for the reply and for yor time.
I am grateful to you for your reply.

The command:
find . -name mosra -type d -exec ls {} \;
lists all the directories and files in mosra directory found. However I want to list ONLY the directories that are present in the mosra directory once it is found.

The command:
find . -name mosra -type d -exec ls -d {} \;
gives the relative path of the mosra directory not the contents in mosra directory. In fact I want only the directories present in the mosra not the files.
Basically I want the directories present in mosra after finding it in the current path.

Hope I am clear in presenting my requirements..


Depending on your exact needs you may want to do that in a couple of lines in a shell script, but you can also get a listing of all directories under the mosra directory by executing one find command inside the other, like this:

find `find . -type d -name mosra` -type d