|
Glassfish example source code file (Strings.properties)
The Glassfish Strings.properties source code# # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. # # Copyright (c) 2009-2011 Oracle and/or its affiliates. All rights reserved. # # The contents of this file are subject to the terms of either the GNU # General Public License Version 2 only ("GPL") or the Common Development # and Distribution License("CDDL") (collectively, the "License"). You # may not use this file except in compliance with the License. You can # obtain a copy of the License at # https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html # or packager/legal/LICENSE.txt. See the License for the specific # language governing permissions and limitations under the License. # # When distributing the software, include this License Header Notice in each # file and include the License file at packager/legal/LICENSE.txt. # # GPL Classpath Exception: # Oracle designates this particular file as subject to the "Classpath" # exception as provided by Oracle in the GPL Version 2 section of the License # file that accompanied this code. # # Modifications: # If applicable, add the following below the License Header, with the fields # enclosed by brackets [] replaced by your own identifying information: # "Portions Copyright [year] [name of copyright owner]" # # Contributor(s): # If you wish your version of this file to be governed by only the CDDL or # only the GPL Version 2, indicate your decision by adding "[Contributor] # elects to include this software in this distribution under the [CDDL or GPL # Version 2] license." If you don't indicate a single choice of license, a # recipient has the option to distribute your version of this file under # either the CDDL, the GPL Version 2 or to extend the choice of license to # its licensees as provided above. However, if you add GPL Version 2 code # and therefore, elected the GPL Version 2 license, then the option applies # only if the new code is made subject to such option by the copyright # holder. # button.Flush=Flush msg.JS.securityMap.enterUserGroups=Enter a value for User Groups msg.JS.securityMap.enterPrincipals=Enter a value for Principals msg.JS.Error.securityMappingCannotBeEmpty=Must specify the value for ## Admin Object Resource adminObjectResources.pageTitle=Admin Object Resources adminObjectResources.pageTitleHelp=An administered object resource provides specialized functionality that is defined by the resource adapter for the deployed connector module. adminObjectResource.editPageTitle=Edit Admin Object Resource adminObjectResource.editPageHelp=Modify an existing administered object resource. adminObject.NewPageTitle=New Admin Object Resource adminObject.NewPageTitleHelp=To create a new admin object resource, specify a unique JNDI name, select the resource adapter, then select a resource type and, optionally, a class name. #adminObject.step2PageTitle=New Admin Object Resource (Step 2 of 2) #adminObject.step2PageTitleHelp=Add a description for the administered object, enable or disable the object on all resources and define name-value property pairs. adminObjectResource.targetPageTitle=Admin Object Resource Targets adminObjectResource.resTypeHelp=Select the resource type of the admin object resource adminObjectResource.resourceAdapterHelp=Select from the list of deployed resource adapters (connector modules) adminObjectResource.classname=Class Name: adminObjectResource.classnameHelp=The implementation class name associated with the resource type #Resources resourcesTable.resources=Resources resourcesTable.sessions=Sessions resourcesTable.connectionFactories=Connection Factories resourcesTable.Pools=Pools resourcesTable.destResources=Destination Resources resourcesTable.colPoolName=Pool Name resourcesTable.colJndiName=JNDI Name resourcesTable.colDesc=Description resourcesTable.colPool=Connection Pool resourcesTable.colResType=Resource Type resourcesTable.colDatasource=Datasource Classname resourcesTable.colDefinition=Connection Definition resourcesTable.colResAdapter=Resource Adapter ## Connectors connectors.pageTitle=Connectors connectors.pageTitleHelp= connectors.User=user connectors.systemAll=system-all connectors.systemAdmin=system-admin connectors.systemInstance=system-instance connectorResources.pageTitle=Connector Resources connectorResources.pageTitleHelp=A connector resource is a program object that provides an application with a connection to an Enterprise Information System (EIS). connectorConnectionPools.pageTitle=Connector Connection Pools connectorConnectionPools.pageTitleHelp=Click New to create a new connector connection pool. Deploy the connector module before creating the pool. Connector modules can be deployed from the <a href="#{request.contextPath}/applications/applications.jsf">Applications page. ## Connector Connection Pool resource.targetPageTitleHelp=Manage the targets (clusters and standalone server instances) on which the resource is available. connectorResource.editPageTitle=Edit Connector Resource connectorResource.editPageTitleHelp=Modify an existing connector resource. connectorResource.targetPageTitle=Connector Resource Targets connectorResource.newPageTitle=New Connector Resource connectorResource.newPageTitleHelp=To create a connector resource, specify the connection pool with which it is associated. Multiple connector resources can use a single connection pool. connectorResource.poolHelp=Use the <a href="#{request.contextPath}/jca/connectorConnectionPools.jsf">Connector Connection Pools page to create new pools connectorConnectionPool.editPageTitle=Edit Connector Connection Pool connectorConnectionPool.editPageTitleHelp=Modify the settings for an existing connector connection pool. connectorConnectionPool.step1PageTitle=New Connector Connection Pool (Step 1 of 2) connectorConnectionPool.step1PageTitleHelp=Specify a pool name, select the associated resource adapter and connection definition, then click Next. connectorConnectionPool.step2PageTitle=New Connector Connection Pool (Step 2 of 2) connectorConnectionPool.step2PageTitleHelp=Verify the connection pool settings, add any needed properties, and click Finish. connectorConnectionPool.connectionDefinitionName=Connection Definition: connectorConnectionPool.connectionDefinitionNameHelp=Interface of the connection definition connectorConnectionPool.onFail=On Any Failure: connectorConnectionPool.onFailHelp=Close all connections and reconnect on failure, otherwise reconnect only when used connectorConnectionPool.closeAll=Close All Connections connectorConnectionPool.transSupport=Transaction Support: connectorConnectionPool.transSupportHelp=Level of transaction support. Overwrite the transaction support attribute in the Resource Adapter in a downward compatible way. connectorConnectionPool.conValidationHelp=Validate connection before passing to container connectorConnectionPool.validateAtmostOnce=Validation Interval: connectorConnectionPool.validateAtmostHelp=Specifies the time interval in seconds between successive requests to validate a connection at most once. Default value is 0, which means the attribute is not enabled. connectorConnectionPool.advancePageTitle=Edit Connector Connection Pool Advanced Attributes connectorConnectionPool.advancePageTitleHelp=Modify advanced attributes of an existing connector connection pool. connectorConnectionPool.propertyPageTitle=Edit Connector Connection Pool Properties connectorConnectionPool.propertyPageTitleHelp=Modify properties of an existing connector connection pool. poolName=Pool Name: connectorSecurityMaps.pageTitle=Connector Connection Pool Security Maps connectorSecurityMaps.pageTitleHelp=Manage security maps. Security maps enable the creation of a mapping between Java EE users and groups and EIS users and groups. connectorSecurityMaps.tableTitle=Security Maps connectorSecurityMaps.tabTitle=Security Maps connectorSecurityMap.newPageTitle=New Connector Connection Pool Security Map connectorSecurityMap.newPageTitleHelp=Create a new security map. Security maps enable the creation of a mapping between Java EE users and groups and EIS users and groups. You must specify either User Groups or Principals, but not both. connectorSecurityMap.editPageTitle=Edit Connector Connection Pool Security Map connectorSecurityMap.editPageTitleHelp=Modify an existing security map. connectorSecurityMap.poolName=Connection Pool Name: connectorSecurityMap.securityMapName=Security Map Name: connectorSecurityMap.userGroups=User Groups: connectorSecurityMap.userGroupsHelp=Example: value1,value2,value3 connectorSecurityMap.principals=Principals: connectorSecurityMap.principalsHelp=Example: value1,value2,value3 connectorSecurityMap.backendPrincipal=Backend Principal connectorSecurityMap.userName=Username: connectorSecurityMap.password=Password: workSecurityMaps.pageTitle=Work Security Maps workSecurityMaps.pageTitleHelp=A work security map maps the caller identity of the work submitted by a resource adapter EIS principal or EIS user group to a suitable principal or user group in the GlassFish Server security domain. workSecurityMaps.tableTitle=Work Security Maps workSecurityMap.newPageTitle=New Work Security Map workSecurityMap.newPageTitleHelp=Create a new work security map for a resource adapter. A work security map maps the caller identity of the work submitted by the resource adapter EIS principal or EIS user group to a suitable principal or user group in the GlassFish Server security domain. workSecurityMap.editPageTitle=Edit Work Security Map workSecurityMap.editPageTitleHelp=Modify an existing work security map for a resource adapter. workSecurityMap.Group=Group: workSecurityMap.Principal=Principal: workSecurityMap.MappedGroup=Mapped Group workSecurityMap.EisGroup=EIS Group workSecurityMap.EISGroupInlineHelp=Specifies a map of the back-end EIS user group to the GlassFish Server user group. Use a comma-separated list to specify more than one mapping. For example, eis-group-1=server-group-1,eis-group-2=server-group-2 workSecurityMap.EISPrincipalInlineHelp=Specifies a map of the back-end EIS principal to the GlassFish Server principal. Use a comma-separated list to specify more than one mapping. For example, eis-principal-1=server-principal-1,eis-principal-2=server-principal-2 workSecurityMap.PrincipalMapping=Principal Mapping workSecurityMap.GroupMapping=Group Mapping tree.resourceAdapterConfigs=Resource Adapter Configs resourceAdapterConfig.pageTitle=Resource Adapter Configs resourceAdapterConfig.pageTitleHelp=A resource adapter config provides the configuration information for a resource adapter. resourceAdapterConfig.tableTitle=Resource Adapter Configs resourceAdapterConfig.tabTitle=Configs resourceAdapterConfig.newPageTitle=New Resource Adapter Config resourceAdapterConfig.newPageTitleHelp=Create a new resource adapter config. resourceAdapterConfig.editPageTitle=Edit Resource Adapter Config resourceAdapterConfig.editPageTitleHelp=Modify an existing resource adapter config. resourceAdapterConfig.Name=Resource Adapter Name: resourceAdapterConfig.NameHelp=Select or enter a resource adapter config name. resourceAdapterConfig.threadPoolId=Thread Pool ID: resourceAdapterConfig.ThreadPoolIdsHelp=The thread pool ID from which the work manager gets the thread. Use the <a href="#{request.contextPath}/web/configuration/threadPools.jsf">Thread Pools page to create new pool resourceAdapterConfig.configs=Configs jcaPool.pooling=Pooling: jcaPool.poolingHelp=When set to false, disables connection pooling for the pool jcaPool.ping=Ping: jcaPool.pingHelp=When enabled, the pool is pinged during creation or reconfiguration to identify and warn of any erroneous values for its attributes jcaPool.poolSettings=Pool Settings jcaPool.initPoolSize=Initial and Minimum Pool Size: jcaPool.initPoolSizeHelp=Minimum and initial number of connections maintained in the pool jcaPool.maxPoolSize=Maximum Pool Size: jcaPool.maxPoolSizeHelp=Maximum number of connections that can be created to satisfy client requests jcaPool.poolResize=Pool Resize Quantity: jcaPool.poolResizeHelp=Number of connections to be removed when pool idle timeout expires jcaPool.idleTimeout=Idle Timeout: jcaPool.idleTimeoutHelp=Maximum time that connection can remain idle in the pool jcaPool.maxWait=Max Wait Time: jcaPool.maxWaitHelp=Amount of time caller waits before connection timeout is sent jcaPool.Validation=Connection Validation jcaPool.conValidation=Connection Validation: jcaPool.conValidationHelp=Validate connections, allow server to reconnect in case of failure jcaPool.connectionSettings=Connection Settings jcaPool.wrapjcaObjects=Wrap JCA Objects: jcaPool.wrapjcaObjectsHelp=When set to true, application will get wrapped JCA objects for Statement, PreparedStatement, CallableStatement, ResultSet, and DatabaseMetaData. jcaPool.statementTimeoutInSeconds=Statement Timeout: jcaPool.statementTimeoutInSecondsHelp=Timeout property of a connection to enable termination of abnormally long running queries. -1 implies that it is not enabled. jcaPool.validateAtmostOnceInSeconds=Validate At Most Once: jcaPool.validateAtmostOnceInSecondsHelp=Specifies the time interval in seconds between successive requests to validate a connection at most once. Default value is 0, which means the attribute is not enabled. jcaPool.connectionLeakTimeoutInSeconds=Leak Timeout: jcaPool.connectionLeakTimeoutInSecondsHelp=0 implies no leak detection jcaPool.connectionLeakReclaim=Leak Reclaim: jcaPool.connectionLeakReclaimHelp=If enabled, leaked connection will be reclaimed by the pool after connection leak timeout occurs jcaPool.connectionCreationRetryAttempts=Creation Retry Attempts: jcaPool.connectionCreationRetryAttemptsHelp=Number of attempts to create a new connection. 0 implies no retries. jcaPool.connectionCreationRetryIntervalInSeconds=Retry Interval: jcaPool.connectionCreationRetryIntervalInSecondsHelp=Time interval between retries while attempting to create a connection. Effective when Creation Retry Attempts value is greater than 0. jcaPool.lazyConnectionEnlistment=Lazy Connection Enlistment: jcaPool.lazyConnectionEnlistmentHelp=Enlist a resource to the transaction only when it is actually used in a method jcaPool.lazyConnectionAssociation=Lazy Association: jcaPool.lazyConnectionAssociationHelp=Connections are lazily associated when an operation is performed on them jcaPool.associationWithThread=Associate with Thread: jcaPool.associationWithThreadHelp=When the same thread is in need of a connection, it can reuse the connection already associated with that thread. jcaPool.matchConnections=Match Connections: jcaPool.matchConnectionsHelp=Turn connection matching for the pool on or off jcaPool.maxConnectionUsageCount=Max Connection Usage : jcaPool.maxConnectionUsageCountHelp=Connections will be reused by the pool for the specified number of times, after which they will be closed. 0 implies the feature is not enabled. msg.Error.resourceAdapterNameCannotBeEmpty=Must specify the Resource Adapter Config name. msg.warning.poolCreatedPingFailed=Pool successfully created with the following Warning msg.warning.poolSavedPingFailed=Values successfully saved with the following Warning msg.JS.confirmDeleteSM=Selected Security Map(s) will be deleted. Continue? msg.JS.confirmDeleteAO=Selected Admin Object(s) will be deleted. Continue? msg.JS.confirmDeleteCR=Selected Resource(s) will be deleted. Continue? msg.JS.confirmDeleteCP=Selected Connection Pool(s) will be deleted. Continue? msg.JS.confirmDeleteSM=Selected Security Map(s) will be deleted. Continue? msg.JS.confirmDeleteAC=Selects Adapter Config(s) will be deleted. Continue? rar.editPageTitle=Edit a Connector Module rar.editPageTitleHelp=Modify an existing Resource Adapter. Click <a href="#{request.contextPath}/jca/resourceAdapterConfigs.jsf">Resource Adapter Configs to create or modify the associated configuration. tree.connectorService=Connector Service connectorService.editPageTitle=Connector Service connectorService.editPageTitleHelp=The attributes specified apply to all resource adapters deployed in this GlassFish Server. connectorService.shutdownTimeout=Shutdown Timeout: connectorService.shutdownTimeoutHelp=Resource Adapters that take longer are ignored and the shutdown procedure continues connectorService.classLoadingPolicy=Connector Classloading Policy: connectorService.classLoadingPolicyHelp=The policy to be used for loading classes. Other Glassfish examples (source code examples)Here is a short list of links related to this Glassfish Strings.properties source code file: |
... this post is sponsored by my books ... | |
#1 New Release! |
FP Best Seller |
Copyright 1998-2021 Alvin Alexander, alvinalexander.com
All Rights Reserved.
A percentage of advertising revenue from
pages under the /java/jwarehouse
URI on this website is
paid back to open source projects.