|
Glassfish example source code file (glassfish-application_6_0-1.dtd)
The Glassfish glassfish-application_6_0-1.dtd source code<!-- DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. Copyright (c) 2010 Oracle and/or its affiliates. All rights reserved. The contents of this file are subject to the terms of either the GNU General Public License Version 2 only ("GPL") or the Common Development and Distribution License("CDDL") (collectively, the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the License at https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html or packager/legal/LICENSE.txt. See the License for the specific language governing permissions and limitations under the License. When distributing the software, include this License Header Notice in each file and include the License file at packager/legal/LICENSE.txt. GPL Classpath Exception: Oracle designates this particular file as subject to the "Classpath" exception as provided by Oracle in the GPL Version 2 section of the License file that accompanied this code. Modifications: If applicable, add the following below the License Header, with the fields enclosed by brackets [] replaced by your own identifying information: "Portions Copyright [year] [name of copyright owner]" Contributor(s): If you wish your version of this file to be governed by only the CDDL or only the GPL Version 2, indicate your decision by adding "[Contributor] elects to include this software in this distribution under the [CDDL or GPL Version 2] license." If you don't indicate a single choice of license, a recipient has the option to distribute your version of this file under either the CDDL, the GPL Version 2 or to extend the choice of license to its licensees as provided above. However, if you add GPL Version 2 code and therefore, elected the GPL Version 2 license, then the option applies only if the new code is made subject to such option by the copyright holder. --> <!-- XML DTD for Glassfish Application Server specific Java EE Application deployment descriptor. This is a companion DTD to application_6.xsd It must include a DOCTYPE of the following form: <!DOCTYPE glassfish-application PUBLIC "-//GlassFish.org//DTD GlassFish Application Server 3.1 Java EE Application 6.0//EN" "http://glassfish.org/dtds/glassfish-application_6_0-1.dtd"> --> <!-- This is the root element of the runtime descriptor document. --> <!ELEMENT glassfish-application (web*, pass-by-reference?, unique-id?, security-role-mapping*, realm?, ejb-ref*, resource-ref*, resource-env-ref*, service-ref*, message-destination-ref*, message-destination*, archive-name?, compatibility?, keep-state?, version-identifier?) > <!ELEMENT web (web-uri, context-root)> <!ELEMENT web-uri (#PCDATA)> <!ELEMENT context-root (#PCDATA)> <!-- Pass by Reference semantics: EJB spec requires pass by value, which will be the default mode of operation. This can be set to true for non-compliant and possibly higher performance. For a stand-alone, this can be set at this level. By setting a similarly named element at glassfish-application, it can apply to all the enclosed ejb modules. Allowed values are true and false. Default will be false. --> <!ELEMENT pass-by-reference (#PCDATA)> <!-- Automatically generated and updated at deployment/redeployment Needs to be unqiue in the system. --> <!ELEMENT unique-id (#PCDATA)> <!ELEMENT security-role-mapping (role-name, (principal-name | group-name)+)> <!ELEMENT role-name (#PCDATA)> <!ELEMENT principal-name (#PCDATA)> <!ATTLIST principal-name class-name CDATA #IMPLIED> <!ELEMENT group-name (#PCDATA)> <!-- realm: Allows specifying an optional authentication realm name which will be used to process all authentication requests associated with this application. If this element is not specified (or if it is given but does not match the name of a configured realm) then the default realm set in the server instances security-service element will be used instead. --> <!ELEMENT realm (#PCDATA)> <!-- name of a resource reference. --> <!ELEMENT res-ref-name (#PCDATA)> <!-- resource-env-ref holds all the runtime bindings of a resource env reference. --> <!ELEMENT resource-env-ref ( resource-env-ref-name, jndi-name )> <!-- name of a resource env reference. --> <!ELEMENT resource-env-ref-name (#PCDATA)> <!-- resource-ref holds the runtime bindings of a resource reference. --> <!ELEMENT resource-ref ( res-ref-name, jndi-name, default-resource-principal?)> <!-- default-resource-principal specifies the default principal that the container will use to access a resource. --> <!ELEMENT default-resource-principal ( name, password)> <!-- name element holds the user name --> <!ELEMENT name (#PCDATA)> <!-- password element holds a password string. --> <!ELEMENT password (#PCDATA)> <!-- ejb-ref element which binds an ejb reference to a jndi name. --> <!ELEMENT ejb-ref (ejb-ref-name, jndi-name)> <!-- ejb-ref-name locates the name of the ejb reference in the application. --> <!ELEMENT ejb-ref-name (#PCDATA)> <!-- jndi name of the associated entity --> <!ELEMENT jndi-name (#PCDATA)> <!-- This node holds information about a logical message destination --> <!ELEMENT message-destination (message-destination-name, jndi-name)> <!-- This node holds the name of a logical message destination --> <!ELEMENT message-destination-name (#PCDATA)> <!-- message-destination-ref is used to directly bind a message destination reference to the jndi-name of a Queue,Topic, or some other physical destination. It should only be used when the corresponding message destination reference does not specify a message-destination-link to a logical message-destination. --> <!ELEMENT message-destination-ref (message-destination-ref-name, jndi-name)> <!-- name of a message-destination reference. --> <!ELEMENT message-destination-ref-name (#PCDATA)> <!-- W E B S E R V I C E S --> <!-- Runtime settings for a web service reference. In the simplest case, there is no runtime information required for a service ref. Runtime info is only needed in the following cases : * to define the port that should be used to resolve a container-managed port * to define default Stub/Call property settings for Stub objects * to define the URL of a final WSDL document to be used instead of the one packaged with a service-ref --> <!ELEMENT service-ref ( service-ref-name, port-info*, call-property*, wsdl-override?, service-impl-class?, service-qname? )> <!-- Coded name (relative to java:comp/env) for a service-reference --> <!ELEMENT service-ref-name ( #PCDATA )> <!-- Information for a port within a service-reference. Either service-endpoint-interface or wsdl-port or both (service-endpoint-interface and wsdl-port) should be specified. If both are specified, wsdl-port represents the port the container should choose for container-managed port selection. The same wsdl-port value must not appear in more than one port-info entry within the same service-ref. If a particular service-endpoint-interface is using container-managed port selection, it must not appear in more than one port-info entry within the same service-ref. The optional message-security-binding element is used to customize the port to provider binding; either by binding the port to a specific provider or by providing a definition of the message security requirements to be enforced by the provider. --> <!ELEMENT port-info ( service-endpoint-interface?, wsdl-port?, stub-property*, call-property*, message-security-binding? )> <!-- Fully qualified name of service endpoint interface --> <!ELEMENT service-endpoint-interface ( #PCDATA )> <!-- Port used in port-info. --> <!ELEMENT wsdl-port ( namespaceURI, localpart )> <!-- JAXRPC property values that should be set on a stub before it's returned to to the web service client. The property names can be any properties supported by the JAXRPC Stub implementation. See javadoc for javax.xml.rpc.Stub --> <!ELEMENT stub-property ( name, value )> <!-- JAXRPC property values that should be set on a Call object before it's returned to the web service client. The property names can be any properties supported by the JAXRPC Call implementation. See javadoc for javax.xml.rpc.Call --> <!ELEMENT call-property ( name, value )> <!-- This is a valid URL pointing to a final WSDL document. It is optional. If specified, the WSDL document at this URL will be used during deployment instead of the WSDL document associated with the service-ref in the standard deployment descriptor. Examples : // available via HTTP <wsdl-override>http://localhost:8000/myservice/myport?WSDL // in a file <wsdl-override>file:/home/user1/myfinalwsdl.wsdl --> <!ELEMENT wsdl-override ( #PCDATA )> <!-- Name of generated service implementation class. This is not set by the deployer. It is derived during deployment. --> <!ELEMENT service-impl-class ( #PCDATA )> <!-- The service-qname element declares the specific WSDL service element that is being refered to. It is not set by the deployer. It is derived during deployment. --> <!ELEMENT service-qname (namespaceURI, localpart)> <!-- The localpart element indicates the local part of a QNAME. --> <!ELEMENT localpart (#PCDATA)> <!-- The namespaceURI element indicates a URI. --> <!ELEMENT namespaceURI (#PCDATA)> <!-- This text nodes holds a value string. --> <!ELEMENT value (#PCDATA)> <!-- The message-layer entity is used to define the value of the auth-layer attribute of message-security-binding elements. Used in: message-security-binding --> <!ENTITY % message-layer "(SOAP)"> <!-- The message-security-binding element is used to customize the webservice-endpoint or port to provider binding; either by binding the webservice-endpoint or port to a specific provider or by providing a definition of the message security requirements to be enforced by the provider. These elements are typically NOT created as a result of the deployment of an application. They need only be created when the deployer or system administrator chooses to customize the webservice-endpoint or port to provider binding. The optional (repeating) message-security sub-element is used to accomplish the latter; in which case the specified message-security requirements override any defined with the provider. The auth-layer attribute identifies the message layer at which the message-security requirements are to be enforced. The optional provider-id attribute identifies the provider-config and thus the authentication provider that is to be used to satisfy the application specific message security requirements. If a value for the provider-id attribute is not specified, and a default provider is defined for the message layer, then it is used. if a value for the provider-id attribute is not specified, and a default provider is not defined at the layer, the authentication requirements defined in the message-security-binding are not enforced. Default: Used in: webservice-endpoint, port-info --> <!ELEMENT message-security-binding ( message-security* )> <!ATTLIST message-security-binding auth-layer %message-layer; #REQUIRED provider-id CDATA #IMPLIED > <!-- The message-security element describes message security requirements that pertain to the request and response messages of the containing endpoint, or port When contained within a webservice-endpoint this element describes the message security requirements that pertain to the request and response messages of the containing endpoint. When contained within a port-info of a service-ref this element describes the message security requirements of the port of the referenced service. The one or more contained message elements define the methods or operations of the containing application, endpoint, or referenced service to which the message security requirements apply. Multiple message-security elements occur within a containing element when it is necessary to define different message security requirements for different messages within the encompassing context. In such circumstances, the peer elements should not overlap in the messages they pertain to. If there is any overlap in the identified messages, no message security requirements apply to the messages for which more than one message-security element apply. Also, no message security requirements apply to any messages of the encompassing context that are not identified by a message element. Default: Used in: webservice-endpoint, and port-info --> <!ELEMENT message-security ( message+, request-protection?, response-protection? )> <!-- The message element identifies the methods or operations to which the message security requirements apply. The identified methods or operations are methods or operations of the resource identified by the context in which the message-security element is defined (e.g. the the resource identified by the service-qname of the containing webservice-endpoint or service-ref). An empty message element indicates that the security requirements apply to all the methods or operations of the identified resource. When operation-name is specified, the security requirements defined in the containing message-security element apply to all the operations of the endpoint with the specified (and potentially overloaded) operation name. Default: Used in: message-security --> <!ELEMENT message ( java-method? | operation-name? )> <!-- The java-method element is used to identify a method (or methods in the case of an overloaded method-name) of the java class indicated by the context in which the java-method is contained. Default: Used in: message --> <!ELEMENT java-method ( method-name, method-params? )> <!-- The operation-name element is used to identify the WSDL name of an operation of a web service. Default: Used in: message --> <!ELEMENT operation-name ( #PCDATA )> <!-- The request-protection element describes the authentication requirements that apply to a request. The auth-source attribute defines a requirement for message layer sender authentication (e.g. username password) or content authentication (e.g. digital signature). The auth-recipient attribute defines a requirement for message layer authentication of the reciever of a message to its sender (e.g. by XML encryption). The before-content attribute value indicates that recipient authentication (e.g. encryption) is to occur before any content authentication (e.g. encrypt then sign) with respect to the target of the containing auth-policy. An absent request-protection element is the recommended shorthand for a request-protection element with unspecified values for both the auth-source and auth-recipient attributes. Default: Used in: message-security * Expected evolution to support partial message protection: * * request-protection ( content-auth-policy* ) * * If the request-protection element contains one or more * content-auth-policy sub-elements, they define the authentication * requirements to be applied to the identified request content. If multiple * content-auth-policy sub-elements are defined, a request sender must * satisfy the requirements independently, and in the specified order. * * The content-auth-policy element would be used to associate authentication * requirements with the parts of the request or response object identified * by the contained method-params or part-name-list sub-elements. * * The content-auth-policy element would be defined as follows: * * content-auth-policy ( method-params | part-name-list ) * ATTLIST content-auth-policy * auth-source (sender | content) #IMPLIED * auth-recipient (before-content | after-content) #IMPLIED * * The part-name-list and part-name elements would be defined as follows: * * part-name-list ( part-name* ) * part-name ( #PCDATA ) * --> <!ELEMENT request-protection EMPTY > <!ATTLIST request-protection auth-source (sender | content) #IMPLIED auth-recipient (before-content | after-content) #IMPLIED> <!-- The response-protection element describes the authentication requirements that apply to a response. The auth-source attribute defines a requirement for message layer sender authentication (e.g. username password) or content authentication (e.g. digital signature). The auth-recipient attribute defines a requirement for message layer authentication of the reciever of a message to its sender (e.g. by XML encryption). The before-content attribute value indicates that recipient authentication (e.g. encryption) is to occur before any content authentication (e.g. encrypt then sign) with respect to the target of the containing auth-policy. An absent response-protection element is the recommended shorthand for a request-protection element with unspecified values for both the auth-source and auth-recipient attributes. Default: Used in: message-security * Expected evolution to support partial message protection: * * response-protection ( content-auth-policy* ) * * see request-protection element for more details * --> <!ELEMENT response-protection EMPTY > <!ATTLIST response-protection auth-source (sender | content) #IMPLIED auth-recipient (before-content | after-content) #IMPLIED> <!-- The method-name element contains the name of a service method of a web service implementation class. Used in: java-method --> <!ELEMENT method-name (#PCDATA)> <!-- The method-params element contains a list of the fully-qualified Java type names of the method parameters. Used in: java-method --> <!ELEMENT method-params (method-param*)> <!-- The method-param element contains the fully-qualified Java type name of a method parameter. Used in: method-params --> <!ELEMENT method-param (#PCDATA)> <!-- The value of the archive-name element will be used to derive the default name of the app-name when app-name is not present in application.xml. The default app name will be archive-name value minus the file extension. For example, if archive-name is foo.ear, the default app-name will be foo. --> <!ELEMENT archive-name (#PCDATA)> <!-- Specifies the Enterprise Server release with which to be backward compatible in terms of JAR visibility requirements for applications. The current allowed value is v2, which refers to GlassFish version 2 or Enterprise Server version 9.1 or 9.1.1. The Java EE 6 platform specification imposes stricter requirements than Java EE 5 did on which JAR files can be visible to various modules within an EAR file. Setting this element to v2 removes these Java EE 6 restrictions. --> <!ELEMENT compatibility (#PCDATA)> <!-- The keep-state element indicates whether the state information should be preserved across redeployment. --> <!ELEMENT keep-state (#PCDATA)> <!-- The version-identifier element contains the version information. The value is retrieved at deployment. --> <!ELEMENT version-identifier (#PCDATA)> Other Glassfish examples (source code examples)Here is a short list of links related to this Glassfish glassfish-application_6_0-1.dtd source code file: |
... this post is sponsored by my books ... | |
#1 New Release! |
FP Best Seller |
Copyright 1998-2021 Alvin Alexander, alvinalexander.com
All Rights Reserved.
A percentage of advertising revenue from
pages under the /java/jwarehouse
URI on this website is
paid back to open source projects.