|
Glassfish example source code file (sun-ejb-jar_2_1-0.dtd)
The Glassfish sun-ejb-jar_2_1-0.dtd source code<!-- XML DTD for Sun Application Server specific EJB jar module deployment descriptor. This is a companion DTD for ejb-jar_2_1.xsd Copyright (c) 2004 by Sun Microsystems, Inc. All Rights Reserved. $Revision: 1.1.1.1 $ --> <!-- This is the root element of the ejb module descriptor document. --> <!ELEMENT sun-ejb-jar (security-role-mapping*, enterprise-beans) > <!-- System unique object id. Automatically generated and updated at deployment/redeployment --> <!ELEMENT unique-id (#PCDATA)> <!-- This is the root element describing all the runtime of an ejb-jar in the application. --> <!ELEMENT enterprise-beans (name?, unique-id?, ejb*, pm-descriptors?, cmp-resource?, message-destination*, webservice-description*)> <!-- This is the element describing runtime bindings for a single ejb. Properties applicable to all types of beans: ejb-name, ejb-ref*, jndi-name, resource-ref*, resource-env-ref*, pass-by-reference?, ior-security-config?, gen-classes?, service-ref* Additional properties applicable to a stateless session bean: bean-pool, webservice-endpoint Additional properties applicable to a stateful session bean: bean-cache, webservice-endpoint Additional properties applicable to an entity bean: is-read-only-bean?, refresh-period-in-seconds?, cmp?, commit-option?, bean-cache?, bean-pool? Additional properties applicable to a message-driven bean: mdb-resource-adapter?, mdb-connection-factory?, jms-durable-subscription-name?, jms-max-messages-load?, bean-pool? ( In case of MDB, jndi-name is the jndi name of the associated jms destination ) --> <!ELEMENT ejb (ejb-name, jndi-name?, ejb-ref*, resource-ref*, resource-env-ref*, service-ref*, pass-by-reference?, cmp?, principal?, mdb-connection-factory?, jms-durable-subscription-name?, jms-max-messages-load?, ior-security-config?, is-read-only-bean?, refresh-period-in-seconds?, commit-option?, cmt-timeout-in-seconds?, use-thread-pool-id?, gen-classes?, bean-pool?, bean-cache?, mdb-resource-adapter?, webservice-endpoint*)> <!-- The text in this element matches the ejb-name of the ejb to which it refers in ejb-jar.xml. --> <!ELEMENT ejb-name (#PCDATA)> <!-- The text in this element is a true/false flag for read only beans. --> <!ELEMENT is-read-only-bean (#PCDATA)> <!-- This is the root element which binds an ejb reference to a jndi name. --> <!ELEMENT ejb-ref (ejb-ref-name, jndi-name)> <!-- The ejb ref name locates the name of the ejb reference in the application. --> <!ELEMENT ejb-ref-name (#PCDATA)> <!-- This element describes runtime information for a CMP EntityBean object for EJB1.1 and EJB2.0 beans. --> <!ELEMENT cmp (mapping-properties?, is-one-one-cmp?, one-one-finders?)> <!-- This contains the location of the persistence vendor specific O/R mapping file --> <!ELEMENT mapping-properties (#PCDATA)> <!-- This element in deprecated. It has been left in the DTD for validation purposes. Any value will be ignored by the runtime. --> <!ELEMENT is-one-one-cmp (#PCDATA)> <!-- This root element contains the finders for CMP 1.1. --> <!ELEMENT one-one-finders (finder+ )> <!-- This root element contains the finder for CMP 1.1 with a method-name and query parameters --> <!ELEMENT finder (method-name, query-params?, query-filter?, query-variables?, query-ordering?)> <!-- This contains the method name for the query field --> <!ELEMENT method-name (#PCDATA)> <!-- This contains the query parameters for CMP 1.1 finder --> <!ELEMENT query-params (#PCDATA)> <!-- This optional element contains the query filter for CMP 1.1 finder --> <!ELEMENT query-filter (#PCDATA)> <!-- This optional element contains variables in query expression for CMP 1.1 finder --> <!ELEMENT query-variables (#PCDATA)> <!-- This optional element contains the ordering specification for CMP 1.1 finder. --> <!ELEMENT query-ordering (#PCDATA)> <!-- This element identifies the database and the policy for processing CMP beans storage. The jndi-name element identifies either the persistence-manager- factory-resource or the jdbc-resource as defined in the server configuration. --> <!ELEMENT cmp-resource (jndi-name, default-resource-principal?, property*, create-tables-at-deploy?, drop-tables-at-undeploy?, database-vendor-name?, schema-generator-properties?)> <!-- This element contains the override properties for the schema generation from CMP beans in this module. --> <!ELEMENT schema-generator-properties (property*) > <!-- This element specifies whether automatic creation of tables for the CMP beans is done at module deployment. Acceptable values are true or false --> <!ELEMENT create-tables-at-deploy ( #PCDATA )> <!-- This element specifies whether automatic dropping of tables for the CMP beans is done at module undeployment. Acceptabel values are true of false --> <!ELEMENT drop-tables-at-undeploy ( #PCDATA )> <!-- This element specifies the database vendor name for ddl files generated at module deployment. Default is SQL92. --> <!ELEMENT database-vendor-name ( #PCDATA )> <!-- This element specifies the connection factory associated with a message-driven bean. --> <!ELEMENT mdb-connection-factory (jndi-name, default-resource-principal?)> <!-- This node holds information about a logical message destination --> <!ELEMENT message-destination (message-destination-name, jndi-name)> <!-- This node holds the name of a logical message destination --> <!ELEMENT message-destination-name (#PCDATA)> <!-- Specifies the name of a durable subscription associated with a message-driven bean's destination. Required for a Topic destination, if subscription-durability is set to Durable (in ejb-jar.xml) --> <!ELEMENT jms-durable-subscription-name (#PCDATA)> <!-- A string value specifies the maximum number of messages to load into a JMS session at one time for a message-driven bean to serve. If not specified, the default is 1. --> <!ELEMENT jms-max-messages-load (#PCDATA)> <!-- This element contains all the generated class names for a bean. --> <!ELEMENT gen-classes ( remote-impl?, local-impl?, remote-home-impl?, local-home-impl? )> <!-- This contains the fully qualified class name of the generated EJBObject impl class. --> <!ELEMENT remote-impl (#PCDATA)> <!-- This contains the fully qualified class name of the generated EJBLocalObject impl class. --> <!ELEMENT local-impl (#PCDATA)> <!-- This contains the fully qualified class name of the generated EJBHome impl class. --> <!ELEMENT remote-home-impl (#PCDATA)> <!-- This contains the fully qualified class name of the generated EJBLocalHome impl class. --> <!ELEMENT local-home-impl (#PCDATA)> <!-- This contains the bean cache properties. Used only for entity beans and stateful session beans --> <!ELEMENT bean-cache (max-cache-size?, resize-quantity?, is-cache-overflow-allowed?, cache-idle-timeout-in-seconds?, removal-timeout-in-seconds?, victim-selection-policy?)> <!-- max-cache-size defines the maximum number of beans in the cache. Should be greater than 1. Default is 512. --> <!ELEMENT max-cache-size (#PCDATA)> <!-- is-cache-overflow-allowed is a boolean which indicates if the cache size is a hard limit or not. Default is true i.e there is no hard limit. max-cache-size is a hint to the cache implementation. --> <!ELEMENT is-cache-overflow-allowed (#PCDATA)> <!-- cache-idle-timeout-in-seconds specifies the maximum time that a stateful session bean or entity bean is allowed to be idle in the cache. After this time, the bean is passivated to backup store. This is a hint to server. Default value for cache-idle-timeout-in-seconds is 600 seconds. --> <!ELEMENT cache-idle-timeout-in-seconds (#PCDATA)> <!-- The amount of time that the bean remains passivated (i.e. idle in the backup store) is controlled by removal-timeout-in-seconds parameter. Note that if a bean was not accessed beyond removal-timeout-in-seconds, then it will be removed from the backup store and hence will not be accessible to the client. The Default value for removal-timeout-in-seconds is 60min. --> <!ELEMENT removal-timeout-in-seconds (#PCDATA)> <!-- victim-selection-policy specifies the algorithm to use to pick victims. Possible values are FIFO | LRU | NRU. Default is NRU, which is actually pseudo-random selection policy. --> <!ELEMENT victim-selection-policy (#PCDATA)> <!-- bean-pool is a root element containing the bean pool properties. Used for stateless session bean, entity bean, and message-driven bean pools. --> <!ELEMENT bean-pool (steady-pool-size?, resize-quantity?, max-pool-size?, pool-idle-timeout-in-seconds?, max-wait-time-in-millis?)> <!-- steady-pool-size specified the initial and minimum number of beans that must be maintained in the pool. Valid values are from 0 to MAX_INTEGER. --> <!ELEMENT steady-pool-size (#PCDATA)> <!-- resize-quantity specifies the number of beans to be created or deleted when the pool or cache is being serviced by the server. Valid values are from 0 to MAX_INTEGER and subject to maximum size limit). Default is 16. --> <!ELEMENT resize-quantity (#PCDATA)> <!-- max-pool-size speifies the maximum pool size. Valid values are from 0 to MAX_INTEGER. Default is 64. --> <!ELEMENT max-pool-size (#PCDATA)> <!-- pool-idle-timeout-in-seconds specifies the maximum time that a stateless session bean or message-driven bean is allowed to be idle in the pool. After this time, the bean is passivated to backup store. This is a hint to server. Default value for pool-idle-timeout-in-seconds is 600 seconds. --> <!ELEMENT pool-idle-timeout-in-seconds (#PCDATA)> <!-- A string field whose valid values are either "B", or "C". Default is "B" --> <!ELEMENT commit-option (#PCDATA)> <!-- Specifies the timeout for transactions started by the container. This value must be greater than zero, else it will be ignored by the container. --> <!ELEMENT cmt-timeout-in-seconds (#PCDATA)> <!-- Specifes the thread pool that will be used to process any invocation on this ejb --> <!ELEMENT use-thread-pool-id (#PCDATA)> <!-- Specifies the maximum time that the caller is willing to wait to get a bean from the pool. Wait time is infinite, if the value specified is 0. Deprecated. --> <!ELEMENT max-wait-time-in-millis (#PCDATA)> <!-- refresh-period-in-seconds specifies the rate at which the read-only-bean must be refreshed from the data source. 0 (never refreshed) and positive (refreshed at specified intervals). Specified value is a hint to the container. Default is 600 seconds. --> <!ELEMENT refresh-period-in-seconds (#PCDATA)> <!-- Specifies the jndi name string. --> <!ELEMENT jndi-name (#PCDATA)> <!-- This text nodes holds a name string. --> <!ELEMENT name (#PCDATA)> <!-- This element holds password text. --> <!ELEMENT password (#PCDATA)> <!-- This node describes a username on the platform. --> <!ELEMENT principal (name)> <!-- security-role-mapping element maps the user principal or group to a different principal on the server. --> <!ELEMENT security-role-mapping (role-name, (principal-name | group-name)+)> <!-- role-name specifies an accepted role --> <!ELEMENT role-name (#PCDATA)> <!-- principal-name specifies a valid principal --> <!ELEMENT principal-name (#PCDATA)> <!-- group-name specifies a valid group name --> <!ELEMENT group-name (#PCDATA)> <!-- The name of a resource reference. --> <!ELEMENT res-ref-name (#PCDATA)> <!-- resource-env-ref holds all the runtime bindings of a resource env reference. --> <!ELEMENT resource-env-ref ( resource-env-ref-name, jndi-name )> <!-- name of a resource env reference. --> <!ELEMENT resource-env-ref-name (#PCDATA)> <!-- resource-ref node holds all the runtime bindings of a resource reference. --> <!ELEMENT resource-ref (res-ref-name, jndi-name, default-resource-principal?)> <!-- user name and password to be used when none are specified while accesing a resource --> <!ELEMENT default-resource-principal ( name, password)> <!-- ior-security-config element describes the security configuration information for the IOR. --> <!ELEMENT ior-security-config ( transport-config? , as-context?, sas-context? )> <!-- transport-config is the root element for security between the end points --> <!ELEMENT transport-config ( integrity, confidentiality, establish-trust-in-target, establish-trust-in-client )> <!-- integrity element indicates if the server (target) supports integrity protected messages. The valid values are NONE, SUPPORTED or REQUIRED --> <!ELEMENT integrity ( #PCDATA)> <!-- confidentiality element indicates if the server (target) supports privacy protected messages. The values are NONE, SUPPORTED or REQUIRED --> <!ELEMENT confidentiality ( #PCDATA)> <!-- establish-trust-in-target element indicates if the target is capable of authenticating to a client. The values are NONE or SUPPORTED. --> <!ELEMENT establish-trust-in-target ( #PCDATA)> <!-- establish-trust-in-client element indicates if the target is capable of authenticating a client. The values are NONE, SUPPORTED or REQUIRED. --> <!ELEMENT establish-trust-in-client ( #PCDATA)> <!-- as-context (CSIv2 authentication service) is the element describing the authentication mechanism that will be used to authenticate the client. If specified it will be the username-password mechanism. --> <!ELEMENT as-context ( auth-method, realm, required )> <!-- required element specifies if the authentication method specified is required to be used for client authentication. If so the EstablishTrustInClient bit will be set in the target_requires field of the AS_Context. The element value is either true or false. --> <!ELEMENT required ( #PCDATA )> <!-- auth-method element describes the authentication method. The only supported value is USERNAME_PASSWORD --> <!ELEMENT auth-method ( #PCDATA )> <!-- realm element describes the realm in which the user is authenticated. Must be a valid realm that is registered in server configuration. --> <!ELEMENT realm ( #PCDATA )> <!-- sas-context (related to CSIv2 security attribute service) element describes the sas-context fields. --> <!ELEMENT sas-context ( caller-propagation )> <!-- caller-propagation element indicates if the target will accept propagated caller identities The values are NONE or SUPPORTED. --> <!ELEMENT caller-propagation ( #PCDATA) > <!-- pass-by-reference elements controls use of Pass by Reference semantics. EJB spec requires pass by value, which will be the default mode of operation. This can be set to true for non-compliant operation and possibly higher performance. For a stand-alone server, this can be used. By setting a similarly named element at sun-application.xml, it can apply to all the enclosed ejb modules. Allowed values are true and false. Default will be false. --> <!ELEMENT pass-by-reference (#PCDATA)> <!-- PM descriptors contain one or more pm descriptors, but only one of them must be in use at any given time. If not specified, the Sun CMP is used. --> <!ELEMENT pm-descriptors ( pm-descriptor+, pm-inuse)> <!-- pm-descriptor describes the pluggable vendor implementation for the CMP support of the CMP entity beans in this module. --> <!ELEMENT pm-descriptor ( pm-identifier, pm-version, pm-config?, pm-class-generator, pm-mapping-factory?)> <!-- pm-identifier element identifies the vendor who provides the CMP implementation --> <!ELEMENT pm-identifier (#PCDATA)> <!-- pm-version further specifies which version of PM vendor product to be used --> <!ELEMENT pm-version (#PCDATA)> <!-- pm-config specifies the vendor specific config file to be used --> <!ELEMENT pm-config (#PCDATA)> <!-- pm-class-generator specifies the vendor specific class generator to be used at the module deploymant time. This is the name of the class specific to this vendor. --> <!ELEMENT pm-class-generator (#PCDATA)> <!-- pm-mapping-factory specifies the vendor specific mapping factory This is the name of the class specific to a vendor. --> <!ELEMENT pm-mapping-factory (#PCDATA)> <!-- pm-inuse specifies which CMP vendor is used. --> <!ELEMENT pm-inuse (pm-identifier, pm-version)> <!-- This holds the runtime configuration properties of the message-driven bean in its operation environment. For example, this may include information about the name of a physical JMS destination etc. Defined this way to match the activation-config on the standard deployment descriptor for message-driven bean. --> <!ELEMENT activation-config ( description?, activation-config-property+ ) > <!-- provide an element description --> <!ELEMENT description (#PCDATA)> <!-- This hold a particular activation config propery name-value pair --> <!ELEMENT activation-config-property ( activation-config-property-name, activation-config-property-value ) > <!-- This holds the name of a runtime activation-config property --> <!ELEMENT activation-config-property-name ( #PCDATA ) > <!-- This holds the value of a runtime activation-config property --> <!ELEMENT activation-config-property-value ( #PCDATA ) > <!-- This node holds the module ID of the resource adapter that is responsible for delivering messages to the message-driven bean, as well as the runtime configuration information for the mdb. --> <!ELEMENT mdb-resource-adapter ( resource-adapter-mid, activation-config? )> <!-- This node holds the module ID of the resource adapter that is responsible for delivering messages to the message-driven bean. --> <!ELEMENT resource-adapter-mid ( #PCDATA ) > <!-- Generic name-value pairs property --> <!ELEMENT property ( name, value ) > <!-- This text nodes holds a value string. --> <!ELEMENT value (#PCDATA)> <!-- W E B S E R V I C E S --> <!-- Information about a web service endpoint. --> <!ELEMENT webservice-endpoint ( port-component-name, endpoint-address-uri?, login-config?, transport-guarantee?, service-qname?, tie-class?, servlet-impl-class? )> <!-- Unique name of a port component within a module --> <!ELEMENT port-component-name ( #PCDATA )> <!-- Relative path combined with web server root to form fully qualified endpoint address for a web service endpoint. For servlet endpoints, this value is relative to the servlet's web application context root. In all cases, this value must be a fixed pattern(i.e. no "*" allowed). If the web service endpoint is a servlet that only implements a single endpoint has only one url-pattern, it is not necessary to set this value since the container can derive it from web.xml. --> <!ELEMENT endpoint-address-uri ( #PCDATA )> <!-- The name of tie implementation class for a port-component. This is not specified by the deployer. It is derived during deployment. --> <!ELEMENT tie-class (#PCDATA)> <!-- The service-qname element declares the specific WSDL service element that is being refered to. It is not set by the deployer. It is derived during deployment. --> <!ELEMENT service-qname (namespaceURI, localpart)> <!-- The localpart element indicates the local part of a QNAME. --> <!ELEMENT localpart (#PCDATA)> <!-- The namespaceURI element indicates a URI. --> <!ELEMENT namespaceURI (#PCDATA)> <!-- Optional authentication configuration for an EJB web service endpoint. Not needed for servet web service endpoints. Their security configuration is contained in the standard web application descriptor. --> <!ELEMENT login-config ( auth-method )> <!-- Name of application-written servlet impl class contained in deployed war. This is not set by the deployer. It is derived by the container during deployment. --> <!ELEMENT servlet-impl-class (#PCDATA)> <!-- Runtime settings for a web service reference. In the simplest case, there is no runtime information required for a service ref. Runtime info is only needed in the following cases : * to define the port that should be used to resolve a container-managed port * to define default Stub/Call property settings for Stub objects * to define the URL of a final WSDL document to be used instead of the one packaged with a service-ref --> <!ELEMENT service-ref ( service-ref-name, port-info*, call-property*, wsdl-override?, service-impl-class?, service-qname? )> <!-- Coded name (relative to java:comp/env) for a service-reference --> <!ELEMENT service-ref-name ( #PCDATA )> <!-- Name of generated service implementation class. This is not set by the deployer. It is derived during deployment. --> <!ELEMENT service-impl-class ( #PCDATA )> <!-- Information for a port within a service-reference. Either service-endpoint-interface or wsdl-port or both (service-endpoint-interface and wsdl-port) should be specified. If both are specified, wsdl-port represents the port the container should choose for container-managed port selection. The same wsdl-port value must not appear in more than one port-info entry within the same service-ref. If a particular service-endpoint-interface is using container-managed port selection, it must not appear in more than one port-info entry within the same service-ref. --> <!ELEMENT port-info ( service-endpoint-interface?, wsdl-port?, stub-property*, call-property* )> <!-- Fully qualified name of service endpoint interface --> <!ELEMENT service-endpoint-interface ( #PCDATA )> <!-- Specifies that the communication between client and server should be NONE, INTEGRAL, or CONFIDENTIAL. NONE means that the application does not require any transport guarantees. A value of INTEGRAL means that the application requires that the data sent between the client and server be sent in such a way that it can't be changed in transit. CONFIDENTIAL means that the application requires that the data be transmitted in a fashion that prevents other entities from observing the contents of the transmission. In most cases, the presence of the INTEGRAL or CONFIDENTIAL flag will indicate that the use of SSL is required. --> <!ELEMENT transport-guarantee ( #PCDATA )> <!-- Port used in port-info. --> <!ELEMENT wsdl-port ( namespaceURI, localpart )> <!-- JAXRPC property values that should be set on a stub before it's returned to to the web service client. The property names can be any properties supported by the JAXRPC Stub implementation. See javadoc for javax.xml.rpc.Stub --> <!ELEMENT stub-property ( name, value )> <!-- JAXRPC property values that should be set on a Call object before it's returned to the web service client. The property names can be any properties supported by the JAXRPC Call implementation. See javadoc for javax.xml.rpc.Call --> <!ELEMENT call-property ( name, value )> <!-- Runtime information about a web service. wsdl-publish-location is optionally used to specify where the final wsdl and any dependent files should be stored. This location resides on the file system from which deployment is initiated. --> <!ELEMENT webservice-description ( webservice-description-name, wsdl-publish-location? )> <!-- Unique name of a webservice within a module --> <!ELEMENT webservice-description-name ( #PCDATA )> <!-- This is a valid URL pointing to a final WSDL document. It is optional. If specified, the WSDL document at this URL will be used during deployment instead of the WSDL document associated with the service-ref in the standard deployment descriptor. Examples : // available via HTTP <wsdl-override>http://localhost:8000/myservice/myport?WSDL // in a file <wsdl-override>file:/home/user1/myfinalwsdl.wsdl --> <!ELEMENT wsdl-override ( #PCDATA )> <!-- file: URL of a directory to which a web-service-description's wsdl should be published during deployment. Any required files will be published to this directory, preserving their location relative to the module-specific wsdl directory(META-INF/wsdl or WEB-INF/wsdl). Example : For an ejb.jar whose webservices.xml wsdl-file element contains META-INF/wsdl/a/Foo.wsdl <wsdl-publish-location>file:/home/user1/publish </wsdl-publish-location> The final wsdl will be stored in /home/user1/publish/a/Foo.wsdl --> <!ELEMENT wsdl-publish-location ( #PCDATA )> Other Glassfish examples (source code examples)Here is a short list of links related to this Glassfish sun-ejb-jar_2_1-0.dtd source code file: |
... this post is sponsored by my books ... | |
#1 New Release! |
FP Best Seller |
Copyright 1998-2021 Alvin Alexander, alvinalexander.com
All Rights Reserved.
A percentage of advertising revenue from
pages under the /java/jwarehouse
URI on this website is
paid back to open source projects.