|
|
Java example source code file (NioEventLoop.java)
This example Java source code file (NioEventLoop.java) is included in the alvinalexander.com
"Java Source Code
Warehouse" project. The intent of this project is to help you "Learn
Java by Example" TM.
Learn more about this Java project at its project page.
The NioEventLoop.java Java example source code
/*
* Copyright 2012 The Netty Project
*
* The Netty Project licenses this file to you under the Apache License,
* version 2.0 (the "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*/
package io.netty.channel.nio;
import io.netty.channel.Channel;
import io.netty.channel.ChannelException;
import io.netty.channel.EventLoop;
import io.netty.channel.EventLoopException;
import io.netty.channel.SelectStrategy;
import io.netty.channel.SingleThreadEventLoop;
import io.netty.util.IntSupplier;
import io.netty.util.concurrent.RejectedExecutionHandler;
import io.netty.util.internal.PlatformDependent;
import io.netty.util.internal.SystemPropertyUtil;
import io.netty.util.internal.logging.InternalLogger;
import io.netty.util.internal.logging.InternalLoggerFactory;
import java.io.IOException;
import java.lang.reflect.Field;
import java.nio.channels.CancelledKeyException;
import java.nio.channels.SelectableChannel;
import java.nio.channels.SelectionKey;
import java.nio.channels.Selector;
import java.nio.channels.spi.SelectorProvider;
import java.util.ArrayList;
import java.util.Collection;
import java.util.ConcurrentModificationException;
import java.util.Iterator;
import java.util.Queue;
import java.util.Set;
import java.util.concurrent.Callable;
import java.util.concurrent.Executor;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.atomic.AtomicBoolean;
/**
* {@link SingleThreadEventLoop} implementation which register the {@link Channel}'s to a
* {@link Selector} and so does the multi-plexing of these in the event loop.
*
*/
public final class NioEventLoop extends SingleThreadEventLoop {
private static final InternalLogger logger = InternalLoggerFactory.getInstance(NioEventLoop.class);
private static final int CLEANUP_INTERVAL = 256; // XXX Hard-coded value, but won't need customization.
private static final boolean DISABLE_KEYSET_OPTIMIZATION =
SystemPropertyUtil.getBoolean("io.netty.noKeySetOptimization", false);
private static final int MIN_PREMATURE_SELECTOR_RETURNS = 3;
private static final int SELECTOR_AUTO_REBUILD_THRESHOLD;
private final IntSupplier selectNowSupplier = new IntSupplier() {
@Override
public int get() throws Exception {
return selectNow();
}
};
private final Callable<Integer> pendingTasksCallable = new Callable() {
@Override
public Integer call() throws Exception {
return NioEventLoop.super.pendingTasks();
}
};
// Workaround for JDK NIO bug.
//
// See:
// - http://bugs.sun.com/view_bug.do?bug_id=6427854
// - https://github.com/netty/netty/issues/203
static {
String key = "sun.nio.ch.bugLevel";
try {
String buglevel = SystemPropertyUtil.get(key);
if (buglevel == null) {
System.setProperty(key, "");
}
} catch (SecurityException e) {
if (logger.isDebugEnabled()) {
logger.debug("Unable to get/set System Property: {}", key, e);
}
}
int selectorAutoRebuildThreshold = SystemPropertyUtil.getInt("io.netty.selectorAutoRebuildThreshold", 512);
if (selectorAutoRebuildThreshold < MIN_PREMATURE_SELECTOR_RETURNS) {
selectorAutoRebuildThreshold = 0;
}
SELECTOR_AUTO_REBUILD_THRESHOLD = selectorAutoRebuildThreshold;
if (logger.isDebugEnabled()) {
logger.debug("-Dio.netty.noKeySetOptimization: {}", DISABLE_KEYSET_OPTIMIZATION);
logger.debug("-Dio.netty.selectorAutoRebuildThreshold: {}", SELECTOR_AUTO_REBUILD_THRESHOLD);
}
}
/**
* The NIO {@link Selector}.
*/
Selector selector;
private SelectedSelectionKeySet selectedKeys;
private final SelectorProvider provider;
/**
* Boolean that controls determines if a blocked Selector.select should
* break out of its selection process. In our case we use a timeout for
* the select method and the select method will block for that time unless
* waken up.
*/
private final AtomicBoolean wakenUp = new AtomicBoolean();
private final SelectStrategy selectStrategy;
private volatile int ioRatio = 50;
private int cancelledKeys;
private boolean needsToSelectAgain;
NioEventLoop(NioEventLoopGroup parent, Executor executor, SelectorProvider selectorProvider,
SelectStrategy strategy, RejectedExecutionHandler rejectedExecutionHandler) {
super(parent, executor, false, DEFAULT_MAX_PENDING_TASKS, rejectedExecutionHandler);
if (selectorProvider == null) {
throw new NullPointerException("selectorProvider");
}
if (strategy == null) {
throw new NullPointerException("selectStrategy");
}
provider = selectorProvider;
selector = openSelector();
selectStrategy = strategy;
}
private Selector openSelector() {
final Selector selector;
try {
selector = provider.openSelector();
} catch (IOException e) {
throw new ChannelException("failed to open a new selector", e);
}
if (DISABLE_KEYSET_OPTIMIZATION) {
return selector;
}
try {
SelectedSelectionKeySet selectedKeySet = new SelectedSelectionKeySet();
Class<?> selectorImplClass =
Class.forName("sun.nio.ch.SelectorImpl", false, PlatformDependent.getSystemClassLoader());
// Ensure the current selector implementation is what we can instrument.
if (!selectorImplClass.isAssignableFrom(selector.getClass())) {
return selector;
}
Field selectedKeysField = selectorImplClass.getDeclaredField("selectedKeys");
Field publicSelectedKeysField = selectorImplClass.getDeclaredField("publicSelectedKeys");
selectedKeysField.setAccessible(true);
publicSelectedKeysField.setAccessible(true);
selectedKeysField.set(selector, selectedKeySet);
publicSelectedKeysField.set(selector, selectedKeySet);
selectedKeys = selectedKeySet;
logger.trace("Instrumented an optimized java.util.Set into: {}", selector);
} catch (Throwable t) {
selectedKeys = null;
logger.trace("Failed to instrument an optimized java.util.Set into: {}", selector, t);
}
return selector;
}
/**
* Returns the {@link SelectorProvider} used by this {@link NioEventLoop} to obtain the {@link Selector}.
*/
public SelectorProvider selectorProvider() {
return provider;
}
@Override
protected Queue<Runnable> newTaskQueue(int maxPendingTasks) {
// This event loop never calls takeTask()
return PlatformDependent.newMpscQueue(maxPendingTasks);
}
@Override
public int pendingTasks() {
// As we use a MpscQueue we need to ensure pendingTasks() is only executed from within the EventLoop as
// otherwise we may see unexpected behavior (as size() is only allowed to be called by a single consumer).
// See https://github.com/netty/netty/issues/5297
if (inEventLoop()) {
return super.pendingTasks();
} else {
return submit(pendingTasksCallable).syncUninterruptibly().getNow();
}
}
/**
* Registers an arbitrary {@link SelectableChannel}, not necessarily created by Netty, to the {@link Selector}
* of this event loop. Once the specified {@link SelectableChannel} is registered, the specified {@code task} will
* be executed by this event loop when the {@link SelectableChannel} is ready.
*/
public void register(final SelectableChannel ch, final int interestOps, final NioTask<?> task) {
if (ch == null) {
throw new NullPointerException("ch");
}
if (interestOps == 0) {
throw new IllegalArgumentException("interestOps must be non-zero.");
}
if ((interestOps & ~ch.validOps()) != 0) {
throw new IllegalArgumentException(
"invalid interestOps: " + interestOps + "(validOps: " + ch.validOps() + ')');
}
if (task == null) {
throw new NullPointerException("task");
}
if (isShutdown()) {
throw new IllegalStateException("event loop shut down");
}
try {
ch.register(selector, interestOps, task);
} catch (Exception e) {
throw new EventLoopException("failed to register a channel", e);
}
}
/**
* Returns the percentage of the desired amount of time spent for I/O in the event loop.
*/
public int getIoRatio() {
return ioRatio;
}
/**
* Sets the percentage of the desired amount of time spent for I/O in the event loop. The default value is
* {@code 50}, which means the event loop will try to spend the same amount of time for I/O as for non-I/O tasks.
*/
public void setIoRatio(int ioRatio) {
if (ioRatio <= 0 || ioRatio > 100) {
throw new IllegalArgumentException("ioRatio: " + ioRatio + " (expected: 0 < ioRatio <= 100)");
}
this.ioRatio = ioRatio;
}
/**
* Replaces the current {@link Selector} of this event loop with newly created {@link Selector}s to work
* around the infamous epoll 100% CPU bug.
*/
public void rebuildSelector() {
if (!inEventLoop()) {
execute(new Runnable() {
@Override
public void run() {
rebuildSelector();
}
});
return;
}
final Selector oldSelector = selector;
final Selector newSelector;
if (oldSelector == null) {
return;
}
try {
newSelector = openSelector();
} catch (Exception e) {
logger.warn("Failed to create a new Selector.", e);
return;
}
// Register all channels to the new Selector.
int nChannels = 0;
for (;;) {
try {
for (SelectionKey key: oldSelector.keys()) {
Object a = key.attachment();
try {
if (!key.isValid() || key.channel().keyFor(newSelector) != null) {
continue;
}
int interestOps = key.interestOps();
key.cancel();
SelectionKey newKey = key.channel().register(newSelector, interestOps, a);
if (a instanceof AbstractNioChannel) {
// Update SelectionKey
((AbstractNioChannel) a).selectionKey = newKey;
}
nChannels ++;
} catch (Exception e) {
logger.warn("Failed to re-register a Channel to the new Selector.", e);
if (a instanceof AbstractNioChannel) {
AbstractNioChannel ch = (AbstractNioChannel) a;
ch.unsafe().close(ch.unsafe().voidPromise());
} else {
@SuppressWarnings("unchecked")
NioTask<SelectableChannel> task = (NioTask) a;
invokeChannelUnregistered(task, key, e);
}
}
}
} catch (ConcurrentModificationException e) {
// Probably due to concurrent modification of the key set.
continue;
}
break;
}
selector = newSelector;
try {
// time to close the old selector as everything else is registered to the new one
oldSelector.close();
} catch (Throwable t) {
if (logger.isWarnEnabled()) {
logger.warn("Failed to close the old Selector.", t);
}
}
logger.info("Migrated " + nChannels + " channel(s) to the new Selector.");
}
@Override
protected void run() {
for (;;) {
try {
switch (selectStrategy.calculateStrategy(selectNowSupplier, hasTasks())) {
case SelectStrategy.CONTINUE:
continue;
case SelectStrategy.SELECT:
select(wakenUp.getAndSet(false));
// 'wakenUp.compareAndSet(false, true)' is always evaluated
// before calling 'selector.wakeup()' to reduce the wake-up
// overhead. (Selector.wakeup() is an expensive operation.)
//
// However, there is a race condition in this approach.
// The race condition is triggered when 'wakenUp' is set to
// true too early.
//
// 'wakenUp' is set to true too early if:
// 1) Selector is waken up between 'wakenUp.set(false)' and
// 'selector.select(...)'. (BAD)
// 2) Selector is waken up between 'selector.select(...)' and
// 'if (wakenUp.get()) { ... }'. (OK)
//
// In the first case, 'wakenUp' is set to true and the
// following 'selector.select(...)' will wake up immediately.
// Until 'wakenUp' is set to false again in the next round,
// 'wakenUp.compareAndSet(false, true)' will fail, and therefore
// any attempt to wake up the Selector will fail, too, causing
// the following 'selector.select(...)' call to block
// unnecessarily.
//
// To fix this problem, we wake up the selector again if wakenUp
// is true immediately after selector.select(...).
// It is inefficient in that it wakes up the selector for both
// the first case (BAD - wake-up required) and the second case
// (OK - no wake-up required).
if (wakenUp.get()) {
selector.wakeup();
}
default:
// fallthrough
}
cancelledKeys = 0;
needsToSelectAgain = false;
final int ioRatio = this.ioRatio;
if (ioRatio == 100) {
processSelectedKeys();
runAllTasks();
} else {
final long ioStartTime = System.nanoTime();
processSelectedKeys();
final long ioTime = System.nanoTime() - ioStartTime;
runAllTasks(ioTime * (100 - ioRatio) / ioRatio);
}
if (isShuttingDown()) {
closeAll();
if (confirmShutdown()) {
break;
}
}
} catch (Throwable t) {
logger.warn("Unexpected exception in the selector loop.", t);
// Prevent possible consecutive immediate failures that lead to
// excessive CPU consumption.
try {
Thread.sleep(1000);
} catch (InterruptedException e) {
// Ignore.
}
}
}
}
private void processSelectedKeys() {
if (selectedKeys != null) {
processSelectedKeysOptimized(selectedKeys.flip());
} else {
processSelectedKeysPlain(selector.selectedKeys());
}
}
@Override
protected void cleanup() {
try {
selector.close();
} catch (IOException e) {
logger.warn("Failed to close a selector.", e);
}
}
void cancel(SelectionKey key) {
key.cancel();
cancelledKeys ++;
if (cancelledKeys >= CLEANUP_INTERVAL) {
cancelledKeys = 0;
needsToSelectAgain = true;
}
}
@Override
protected Runnable pollTask() {
Runnable task = super.pollTask();
if (needsToSelectAgain) {
selectAgain();
}
return task;
}
private void processSelectedKeysPlain(Set<SelectionKey> selectedKeys) {
// check if the set is empty and if so just return to not create garbage by
// creating a new Iterator every time even if there is nothing to process.
// See https://github.com/netty/netty/issues/597
if (selectedKeys.isEmpty()) {
return;
}
Iterator<SelectionKey> i = selectedKeys.iterator();
for (;;) {
final SelectionKey k = i.next();
final Object a = k.attachment();
i.remove();
if (a instanceof AbstractNioChannel) {
processSelectedKey(k, (AbstractNioChannel) a);
} else {
@SuppressWarnings("unchecked")
NioTask<SelectableChannel> task = (NioTask) a;
processSelectedKey(k, task);
}
if (!i.hasNext()) {
break;
}
if (needsToSelectAgain) {
selectAgain();
selectedKeys = selector.selectedKeys();
// Create the iterator again to avoid ConcurrentModificationException
if (selectedKeys.isEmpty()) {
break;
} else {
i = selectedKeys.iterator();
}
}
}
}
private void processSelectedKeysOptimized(SelectionKey[] selectedKeys) {
for (int i = 0;; i ++) {
final SelectionKey k = selectedKeys[i];
if (k == null) {
break;
}
// null out entry in the array to allow to have it GC'ed once the Channel close
// See https://github.com/netty/netty/issues/2363
selectedKeys[i] = null;
final Object a = k.attachment();
if (a instanceof AbstractNioChannel) {
processSelectedKey(k, (AbstractNioChannel) a);
} else {
@SuppressWarnings("unchecked")
NioTask<SelectableChannel> task = (NioTask) a;
processSelectedKey(k, task);
}
if (needsToSelectAgain) {
// null out entries in the array to allow to have it GC'ed once the Channel close
// See https://github.com/netty/netty/issues/2363
for (;;) {
i++;
if (selectedKeys[i] == null) {
break;
}
selectedKeys[i] = null;
}
selectAgain();
// Need to flip the optimized selectedKeys to get the right reference to the array
// and reset the index to -1 which will then set to 0 on the for loop
// to start over again.
//
// See https://github.com/netty/netty/issues/1523
selectedKeys = this.selectedKeys.flip();
i = -1;
}
}
}
private void processSelectedKey(SelectionKey k, AbstractNioChannel ch) {
final AbstractNioChannel.NioUnsafe unsafe = ch.unsafe();
if (!k.isValid()) {
final EventLoop eventLoop;
try {
eventLoop = ch.eventLoop();
} catch (Throwable ignored) {
// If the channel implementation throws an exception because there is no event loop, we ignore this
// because we are only trying to determine if ch is registered to this event loop and thus has authority
// to close ch.
return;
}
// Only close ch if ch is still registerd to this EventLoop. ch could have deregistered from the event loop
// and thus the SelectionKey could be cancelled as part of the deregistration process, but the channel is
// still healthy and should not be closed.
// See https://github.com/netty/netty/issues/5125
if (eventLoop != this || eventLoop == null) {
return;
}
// close the channel if the key is not valid anymore
unsafe.close(unsafe.voidPromise());
return;
}
try {
int readyOps = k.readyOps();
// Also check for readOps of 0 to workaround possible JDK bug which may otherwise lead
// to a spin loop
if ((readyOps & (SelectionKey.OP_READ | SelectionKey.OP_ACCEPT)) != 0 || readyOps == 0) {
unsafe.read();
if (!ch.isOpen()) {
// Connection already closed - no need to handle write.
return;
}
}
if ((readyOps & SelectionKey.OP_WRITE) != 0) {
// Call forceFlush which will also take care of clear the OP_WRITE once there is nothing left to write
ch.unsafe().forceFlush();
}
if ((readyOps & SelectionKey.OP_CONNECT) != 0) {
// remove OP_CONNECT as otherwise Selector.select(..) will always return without blocking
// See https://github.com/netty/netty/issues/924
int ops = k.interestOps();
ops &= ~SelectionKey.OP_CONNECT;
k.interestOps(ops);
unsafe.finishConnect();
}
} catch (CancelledKeyException ignored) {
unsafe.close(unsafe.voidPromise());
}
}
private static void processSelectedKey(SelectionKey k, NioTask<SelectableChannel> task) {
int state = 0;
try {
task.channelReady(k.channel(), k);
state = 1;
} catch (Exception e) {
k.cancel();
invokeChannelUnregistered(task, k, e);
state = 2;
} finally {
switch (state) {
case 0:
k.cancel();
invokeChannelUnregistered(task, k, null);
break;
case 1:
if (!k.isValid()) { // Cancelled by channelReady()
invokeChannelUnregistered(task, k, null);
}
break;
}
}
}
private void closeAll() {
selectAgain();
Set<SelectionKey> keys = selector.keys();
Collection<AbstractNioChannel> channels = new ArrayList(keys.size());
for (SelectionKey k: keys) {
Object a = k.attachment();
if (a instanceof AbstractNioChannel) {
channels.add((AbstractNioChannel) a);
} else {
k.cancel();
@SuppressWarnings("unchecked")
NioTask<SelectableChannel> task = (NioTask) a;
invokeChannelUnregistered(task, k, null);
}
}
for (AbstractNioChannel ch: channels) {
ch.unsafe().close(ch.unsafe().voidPromise());
}
}
private static void invokeChannelUnregistered(NioTask<SelectableChannel> task, SelectionKey k, Throwable cause) {
try {
task.channelUnregistered(k.channel(), cause);
} catch (Exception e) {
logger.warn("Unexpected exception while running NioTask.channelUnregistered()", e);
}
}
@Override
protected void wakeup(boolean inEventLoop) {
if (!inEventLoop && wakenUp.compareAndSet(false, true)) {
selector.wakeup();
}
}
int selectNow() throws IOException {
try {
return selector.selectNow();
} finally {
// restore wakup state if needed
if (wakenUp.get()) {
selector.wakeup();
}
}
}
private void select(boolean oldWakenUp) throws IOException {
Selector selector = this.selector;
try {
int selectCnt = 0;
long currentTimeNanos = System.nanoTime();
long selectDeadLineNanos = currentTimeNanos + delayNanos(currentTimeNanos);
for (;;) {
long timeoutMillis = (selectDeadLineNanos - currentTimeNanos + 500000L) / 1000000L;
if (timeoutMillis <= 0) {
if (selectCnt == 0) {
selector.selectNow();
selectCnt = 1;
}
break;
}
// If a task was submitted when wakenUp value was true, the task didn't get a chance to call
// Selector#wakeup. So we need to check task queue again before executing select operation.
// If we don't, the task might be pended until select operation was timed out.
// It might be pended until idle timeout if IdleStateHandler existed in pipeline.
if (hasTasks() && wakenUp.compareAndSet(false, true)) {
selector.selectNow();
selectCnt = 1;
break;
}
int selectedKeys = selector.select(timeoutMillis);
selectCnt ++;
if (selectedKeys != 0 || oldWakenUp || wakenUp.get() || hasTasks() || hasScheduledTasks()) {
// - Selected something,
// - waken up by user, or
// - the task queue has a pending task.
// - a scheduled task is ready for processing
break;
}
if (Thread.interrupted()) {
// Thread was interrupted so reset selected keys and break so we not run into a busy loop.
// As this is most likely a bug in the handler of the user or it's client library we will
// also log it.
//
// See https://github.com/netty/netty/issues/2426
if (logger.isDebugEnabled()) {
logger.debug("Selector.select() returned prematurely because " +
"Thread.currentThread().interrupt() was called. Use " +
"NioEventLoop.shutdownGracefully() to shutdown the NioEventLoop.");
}
selectCnt = 1;
break;
}
long time = System.nanoTime();
if (time - TimeUnit.MILLISECONDS.toNanos(timeoutMillis) >= currentTimeNanos) {
// timeoutMillis elapsed without anything selected.
selectCnt = 1;
} else if (SELECTOR_AUTO_REBUILD_THRESHOLD > 0 &&
selectCnt >= SELECTOR_AUTO_REBUILD_THRESHOLD) {
// The selector returned prematurely many times in a row.
// Rebuild the selector to work around the problem.
logger.warn(
"Selector.select() returned prematurely {} times in a row; rebuilding Selector {}.",
selectCnt, selector);
rebuildSelector();
selector = this.selector;
// Select again to populate selectedKeys.
selector.selectNow();
selectCnt = 1;
break;
}
currentTimeNanos = time;
}
if (selectCnt > MIN_PREMATURE_SELECTOR_RETURNS) {
if (logger.isDebugEnabled()) {
logger.debug("Selector.select() returned prematurely {} times in a row for Selector {}.",
selectCnt - 1, selector);
}
}
} catch (CancelledKeyException e) {
if (logger.isDebugEnabled()) {
logger.debug(CancelledKeyException.class.getSimpleName() + " raised by a Selector {} - JDK bug?",
selector, e);
}
// Harmless exception - log anyway
}
}
private void selectAgain() {
needsToSelectAgain = false;
try {
selector.selectNow();
} catch (Throwable t) {
logger.warn("Failed to update SelectionKeys.", t);
}
}
}
Other Java examples (source code examples)
Here is a short list of links related to this Java NioEventLoop.java source code file:
|
The search page
Other Java source code examples at this package level
Click here to learn more about this project
