Mac Mighty Mouse FAQ: Help, my Apple wireless Mighty Mouse clicks but won't track properly; what's going on?
I’ve had a lot of problems with batteries with my Apple Bluetooth (wireless) Mighty Mouse, including this “tracking” problem, but fortunately everything just came to a happy conclusion.Back to top
Problem 1: Wireless Mac Mighty Mouse quits tracking on a semi-shiny surface
Within the last month my Mighty Mouse quit working on a semi-reflective dining room table I’ve used it on for several months now. I thought maybe it had gotten dirty, so I tried to clean the wireless Mighty Mouse area that projects the red light on the surface, but that didn’t work. I then tested it with a mouse pad, and it started working, so I started using the mouse pad, and eventually forgot about it. But then ...Back to top
Problem 2: Mighty Mouse quits tracking completely
This morning — after taking the wireless Mighty Mouse batteries out yesterday because I needed them for a camera — I put new batteries in, and then I couldn’t get the wireless Mighty Mouse to move (track) at all. I could use it to click (which is pretty worthless), but I couldn’t get it to track at all. Thinking those batteries might be bad, I put the previous batteries in, but the Mighty Mouse still wouldn’t track.
I read this Apple technical document, and then thought the two devices just needed to re-sync, so I tried turning the mouse off and on several times, but no luck there. I restarted the Bluetooth service on my MacBook Pro several times, but it still didn’t work. Finally, I shut everything down and re-booted my Mac, and when the mouse still didn’t work the idea of running the mouse over in the driveway kicked in.
While looking at the Bluetooth configuration on my Mac I happened to notice that the screen that shows the battery power for the mouse showed full power: green bars all the way across. So it couldn’t be a problem with the batteries ... could it?Back to top
Solution: Clean the mouse battery contacts
Finally, after reading this discussion thread I took the wireless Mighty Mouse batteries out once again, and noticed that the terminals (leads) in the mouse that contact with the positive end of the batteries had a very slight discoloration. It turned out to be a film of some sort (oxidation?) that wiped off easily with a paper towel.
After wiping off these wireless Mighty Mouse contacts and putting the batteries back in, the red light on the mouse started blinking two times again, and I thought I was doomed, when suddenly the red light on the mouse stayed on, and I knew the problem was solved. That little bit of film, or oxidation, on the battery leads had caused the Mighty Mouse not to track.
I’ve seen similar problems reported regarding wireless keyboards as well, so I’m wondering if the same solution will work for wireless keyboard users as well.Back to top
How about that mouse pad?
But wait — there’s more. It suddenly occurred to me that maybe, just maybe, the mouse would start tracking on the dining room table again. Sure enough, I pushed the mouse pad to the side, and I could move the mouse all around on this semi-reflective surface!
The solution is amazing to me. A simple little problem like this first caused the Bluetooth/wireless Might Mouse to quit working on the table, then later caused the mouse not to track completely.
thank you ... this solved my problem too.
Thanks very much for your brilliant suggestion to clean the mouse terminals. You're right! and it works!
Thanks, this solved my problem as well.
Thank you very much. This was pretty annoying but your tip helped!
Thank you very much for this brilliant tip!
Top tip that sorted my mouse problem out too.. many thanks.
After a year of letting my "broken" mouse sit on my desk, when my standard mouse started double clicking every time I clicked I decided to try to fix my bluetooth one.
After repeatedly hammering on the thing I decided to look to see if it was a software problem. Pairing didn't seem to be a problem. I found your suggestion and within 1 minute got it working!
Just amazing that that little bit of crap on the leads can render a $70 device from working.
Thanks! Saved me a lot of frustration this evening!
wow it worked!!
Mega-thanks! Dabbed the lead with a little citrus-based DesolvIt and I'm back in business. Last year had to reglue the metal strip on the on-off slider (thanks to another helpful forum entry) to get this stupid device to turn on.
Great advice, thank you...I experienced the exact same story and solution.
My magic mouse will click but NOT track. Tried cleaning the terminals, re-sync'd, changed batteries.....not sure what else to do. Any ideas?
Thought it was the magic mouse but cleaned the battery contact points et voila! working again. Not sure what happened to the batteries as I'd been using the same ones for a while but who cares...... mouse behaving normally again.
OMFG, I was about to buy a new mouse, but then I saw this tutorial.
It's amazing, thanks man.
I had the same problem! After several attempts, I tried to push the lens with a pencil eraser, now it works fine