|
Glassfish example source code file (LocalStrings.properties)
The Glassfish LocalStrings.properties source code# # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. # # Copyright (c) 2011 Oracle and/or its affiliates. All rights reserved. # # The contents of this file are subject to the terms of either the GNU # General Public License Version 2 only ("GPL") or the Common Development # and Distribution License("CDDL") (collectively, the "License"). You # may not use this file except in compliance with the License. You can # obtain a copy of the License at # https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html # or packager/legal/LICENSE.txt. See the License for the specific # language governing permissions and limitations under the License. # # When distributing the software, include this License Header Notice in each # file and include the License file at packager/legal/LICENSE.txt. # # GPL Classpath Exception: # Oracle designates this particular file as subject to the "Classpath" # exception as provided by Oracle in the GPL Version 2 section of the License # file that accompanied this code. # # Modifications: # If applicable, add the following below the License Header, with the fields # enclosed by brackets [] replaced by your own identifying information: # "Portions Copyright [year] [name of copyright owner]" # # Contributor(s): # If you wish your version of this file to be governed by only the CDDL or # only the GPL Version 2, indicate your decision by adding "[Contributor] # elects to include this software in this distribution under the [CDDL or GPL # Version 2] license." If you don't indicate a single choice of license, a # recipient has the option to distribute your version of this file under # either the CDDL, the GPL Version 2 or to extend the choice of license to # its licensees as provided above. However, if you add GPL Version 2 code # and therefore, elected the GPL Version 2 license, then the option applies # only if the new code is made subject to such option by the copyright # holder. # CommandSuccessful=Command {0} executed successfully. CommandUnSuccessful=Command {0} failed. CommandUnSuccessfulWithArg=Command {0} failed: {1} no.console=Not connected to console, giving up ################### internal.error=Internal Error: {0} ################### list.domains.StatusRunning=running list.domains.StatusRestartRequired=running, restart required to apply configuration changes list.domains.StatusNotRunning=not running list.domains.StatusUnknown=status unknown list.domains.Output={0} {1} NoDomainsToList=CLI141 No Domains to list. ################### ## create-service create.service.BadDomainDir=The domain directory specified does not exist: {0} create.service.BadDomainDirParent=The parent directory of the specified domain directory does not exist: {0} create.service.noAsadminScript=Can not find the location of the asadmin script. I was looking here: {0} create.service.noDomainDirs=No domains exist in {0} create.service.tooManyDomainDirs=There is more than one domain in {0}. Try again but specify the domain name as the last argument. create.service.runtimeHelp={0}\nFor your convenience this message has also been saved to this file: {1} ################### ## start-database, stop-database command DatabaseNotInstalled=The database is not installed. Please download and install the database from the Update Center. DatabaseStartMsg=Starting database in the background. DatabaseNotStarted=Database not started. LogRedirectedTo=Log redirected to {0}. StartDatabaseStatus=Database already started on host {0}, port {1}. StopDatabaseStatus=Unable to stop database on host {0}, port {1}. UnableToStartDatabase=Unable to start database. Please check log in {0}. UnableToStopDatabase=Unable to stop database. Please check log in {0}. UnableToAccessDatabaseLog=Unable to access derby.log in {0}. UnableToConnectToDatabase=Unable to connect to database. database.info.msg=Starting database in Network Server mode on host {0} and port {1}. database.driver.name.msg=Clients can connect to the database using: [{0}]. database.driver.version.msg=Database Driver Version: [{0}] jdbc.version.msg=JDBC Specification Version: [{0}] CouldNotGetSysInfo=Unable to retrieve database system information. ################### ## login AdminUserPrompt=Enter admin user name [default: {0}]> AdminPasswordPrompt=Enter admin password> LoginInfoStored=Login information relevant to admin user name [{0}]\nfor host [{1}] and admin port [{2}] stored at\n[{3}] successfully.\nMake sure that this file remains protected.\nInformation stored in this file will be used by\nasadmin commands to manage the associated domain. LoginInfoStoredCreateDomain=Login information relevant to admin user name [{0}]\nfor this domain [{1}] stored at\n[{2}] successfully.\nMake sure that this file remains protected.\nInformation stored in this file will be used by\nasadmin commands to manage this domain. LoginInfoNotStored=Login information is not saved for host name [{0}] and port [{1}] InvalidCredentials=Authorization has been refused for credentials [user: {0}] given in this request.\n(Usually, this means invalid user name and/or password) ConnectException=Remote server is not listening for requests on [{0}:{1}].\nPlease make sure the server is running. IOException=Unexpected I/O error while talking to server [{0}:{1}].\nPlease make sure the server is running. UnknownException=Unknown exception while talking to server [{0}:{1}].\nPlease make sure the server is running. ################### ## delete-domain DomainDeleted=Domain {0} deleted. InvalidDomainPath=CLI138 Invalid domain path, {0} CouldNotDeleteDomain=CLI139 Could not delete domain, {0}. domain.is.running=Domain {0} at {1} is running. Stop it first. domain.fileinuse=A file or folder within domain {0} at {1} is in use. Stop using it before deleting the domain. ################### ## create-domain UsingProfile=Domain being created with profile:{0}, as specified {1}. ProfileGlobalDefaultSource=by global default ProfileUserSource=on command line or environment InvalidCharInDomain=CLI129 Invalid character in domain name, {0} CouldNotCreateDomain=CLI130 Could not create domain, {0} InvalidPortNumber=CLI136 Port {0} should be a numeric value. RequireEitherOrOption=Option {0} or {1} must be specified. AdminPassword=the admin password MasterPassword=the master password DomainCreated=Domain {0} created. InvalidPortRange=CLI160 Invalid Port {0}, should be between 1 and 65535. PortInUseError=Port for {0} ({1}) is in use. Try a different port number. PortInUseWarning=Warning: Port {0} is in use. Ignoring since the checkports option is set to false. NoPermissionForPortError=You do not have permission to use port {0} for {1}. Try a different port number or login to a more privileged account. NoPermissionForPortWarning=Warning: You do not have permission to use port {0} for {1}. Ignoring since the checkports option is set to false. UnknownPortMsg=Unknown error when trying port {0}. Try a different port number. InvalidPortBaseRange=CLI211 Invalid Port {0} for {1}, should be between 1 and 65535. Choose a portbase value such that the resulting port number doesn''t exceed 65535. UsingPort=Using port {1} for {0}. DomainExists=Domain exists: {0} OverwriteLoginMsgCreateDomain=Admin login information for host [{0}] and port [{1}]\nis being overwritten with credentials provided because the\n--savelogin option was used during the create-domain command. LoginInfoNotStoredCreateDomain=Login information relevant to admin user name [{0}] for this domain [{1}] could not be stored.\nThis means that the file .asadminpass in home folder is tampered.\nFix the format for this file. DefaultPortInUse=Default port {1} for {0} is in use. Using {2} PortNotSpecified=Port for {0} is not specified. Using {1} InvalidPortRangeMsg=Invalid Port for {0}, should be between 1 and 65535. Using {1} PortInUse=Port {1} for {0} is in use. Using {2} UsingDefaultPort=Using default port {1} for {0}. MutuallyExclusiveOption=CLI169 Options {0} and {1} are mutually exclusive. You must specify one or the other but not both. PortPrivilege=On Unix platforms, port numbers below 1024 may require special privileges. PasswordMissing=Value for {0} was not specified. PasswordLimit=CLI128 Value for {0} must have 8 or more characters. InvalidPropertySyntax=Invalid property syntax: {0} PortBasePortInUse=Port {0} is in use. UsingTemplate=Using template {0} DeprecatedAdminPassword=The AS_ADMIN_ADMINPASSWORD option in the password file is deprecated.\nUse AS_ADMIN_PASSWORD instead. AdminUserRequiredPrompt=Enter admin user name [Enter to accept default "{0}" / no password]> AdminUserRequired=Must specify an admin user (e.g., using the --user option). DomainPort=Domain {0} admin port is {1}. DomainAllowsUnauth=Domain {0} allows admin login as user "{1}" with no password. DomainAdminUser=Domain {0} admin user is "{1}". CustomizationFailed=Domain.xml customization failed : {0} NoCustomization=No domain initializers found, bypassing customization step InvokeInitializer=Invoke DomainInitializer {0} ################### ## verify-domain-xml VerifySuccess=All tests passed; domain.xml is valid. VerifyError=Error: {0} VerifyDupKey=Duplicate Key: {0} for type = {1} ################### ## backup FileDoesNotExist=CLI146 File does not exist: {0} FileCanNotRead=Can not read the file due to permissions: {0} FileIsDirectory=Can not read the file, the file is a directory: {0} NoVerboseAndTerseAtTheSameTime=The --verbose and --terse options can not be used together. DomainIsNotStopped=The domain ({0}) must be stopped prior to performing the backup. DomainIsNotSuspended=The domain ({0}) must be stopped or suspended prior to performing the backup. InvalidDirectory=Invalid directory {0}. UseForceOption=Neither the --filename parameter nor the domain name was specified. Use the --force option to restore the archived domain to the existing domain. InvalidBackupDirPath=Backup directory path {0} must be an absolute path. InvalidBackupRecycleLimit=Backup recycle limit {0} must be a non-negative integer. ## DerbyControl ContinueStartingDatabase=Will start database using temporary log file. InvalidDBDirectory=Invalid database home directory: {0} ## change-master-password current.mp=Enter the current master password> incorrect.mp=Incorrect current master password. You will not be able to change it. new.mp=the new master password both.domaindir.nodedir.not.allowed=You cannot specify both domaindir and nodedir together. \ You can use one or the other. ################################ serviceUser_wrong_os=The serviceuser parameter is only supported on Linux. create.service.badServiceName=Windows requires that the service name contain only \ legal filename characters, no spaces and no dots. Please choose another name. \n\ This is the name you specified: {0} Other Glassfish examples (source code examples)Here is a short list of links related to this Glassfish LocalStrings.properties source code file: |
... this post is sponsored by my books ... | |
#1 New Release! |
FP Best Seller |
Copyright 1998-2021 Alvin Alexander, alvinalexander.com
All Rights Reserved.
A percentage of advertising revenue from
pages under the /java/jwarehouse
URI on this website is
paid back to open source projects.