alvinalexander.com | career | drupal | java | mac | mysql | perl | scala | uml | unix  

Glassfish example source code file (Strings.properties)

This example Glassfish source code file (Strings.properties) is included in the DevDaily.com "Java Source Code Warehouse" project. The intent of this project is to help you "Learn Java by Example" TM.

Java - Glassfish tags/keywords

glassfish, glassfish, gpl, instances, license, license, name, server, server, service, ssh, the, the, version

The Glassfish Strings.properties source code

#
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
#
# Copyright (c) 2010 Oracle and/or its affiliates. All rights reserved.
#
# The contents of this file are subject to the terms of either the GNU
# General Public License Version 2 only ("GPL") or the Common Development
# and Distribution License("CDDL") (collectively, the "License").  You
# may not use this file except in compliance with the License.  You can
# obtain a copy of the License at
# https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
# or packager/legal/LICENSE.txt.  See the License for the specific
# language governing permissions and limitations under the License.
#
# When distributing the software, include this License Header Notice in each
# file and include the License file at packager/legal/LICENSE.txt.
#
# GPL Classpath Exception:
# Oracle designates this particular file as subject to the "Classpath"
# exception as provided by Oracle in the GPL Version 2 section of the License
# file that accompanied this code.
#
# Modifications:
# If applicable, add the following below the License Header, with the fields
# enclosed by brackets [] replaced by your own identifying information:
# "Portions Copyright [year] [name of copyright owner]"
#
# Contributor(s):
# If you wish your version of this file to be governed by only the CDDL or
# only the GPL Version 2, indicate your decision by adding "[Contributor]
# elects to include this software in this distribution under the [CDDL or GPL
# Version 2] license."  If you don't indicate a single choice of license, a
# recipient has the option to distribute your version of this file under
# either the CDDL, the GPL Version 2 or to extend the choice of license to
# its licensees as provided above.  However, if you add GPL Version 2 code
# and therefore, elected the GPL Version 2 license, then the option applies
# only if the new code is made subject to such option by the copyright
# holder.
#


tree.clusters=Clusters
tree.nodes=Nodes
tree.standaloneInstances=Standalone Instances
tree.gms=Group Management Service
tree.gms.tooltip=Group Management Service
tree.availsvc=Availability Service

nodeLabel=Node:

### Cluster
button.stopCluster=Stop Cluster
button.startCluster=Start Cluster
button.LoadDefaults=Load Defaults
clusterNew.Configuration=Configuration:
clusterNew.ConfigurationHelp=The default-config configuration can only be copied, not referenced.
clusterNew.CopyConfig=Make a Copy of the Selected Configuration
clusterNew.ReferenceConfig=Reference the Selected Configuration
clusterNew.TableTitle=Server Instances to Be Created
clusterNew.PageTitle=New Cluster
clusterNew.PageTitleHelp=To create a cluster that does not share its configuration, select the default-config configuration and the Make a Copy of the Selected Configuration option. To create a cluster that shares its configuration, select another configuration and the Reference the Selected Configuration option.
clusterNew.InstanceNameCol=Instance Name
clusterNew.WeightCol=Weight
clusterNew.NodeCol=Node
clusterNew.Node=Node:
clusterNew.NodeHelp=Name of the node on which the instance will reside

clusters.PageTitle=Clusters
clusters.PageTitleHelp=If no nodes exist, create a node before adding instances to a cluster. To create a node, use the <a href="../node/nodes.jsf">Nodes page.
clusters.TableTitle=Clusters
clusters.instanceCol=Instances
cluster.error.start-cluster=When trying to start the following clusters:
cluster.error.stop-cluster=When trying to stop the following clusters:
cluster.error.delete-cluster=When trying to delete the following clusters:

instance.error.start-instance=When trying to start the following instances:
instance.error.stop-instance=When trying to stop the following instances:
instance.error.delete-instance=When trying to delete the following instances:
instance.error.updateWeight=When trying to update the following instances:

button.stopCluster=Stop Cluster
button.startCluster=Start Cluster
common.Configuration=Configuration:

cluster.GeneralTab=General
cluster.ApplicationsTab=Applications
cluster.InstancesTab=Instances
cluster.ResourcesTab=Resources
cluster.PropertiesTab=Properties
cluster.ClusterConfigPropertiesTab=Properties
cluster.SystemPropertiesTab=System Properties
cluster.ClusterProperties=Cluster Properties
cluster.ClusterSystemProperties=Cluster System Properties
cluster.InstanceProperties=Instance Properties
cluster.InstanceSystemProperties=Instance System Properties

# Migrate Timers
button.migrateEjbTimer=Migrate EJB Timers...
cluster.migrateEjbTimersHelp=Migrate EJB timers associated with a GlassFish Server instance that has stopped or failed abnormally to another instance.
cluster.migrateEjbTimers=Migrate EJB Timers
cluster.migrateEjbTimersNoRunningInstance=No GlassFish Server instance in the cluster to which EJB timers can be migrated is running.
cluster.sourceCluster=Source
cluster.destCluster=Destination

cluster.GeneralTitle=General Information
cluster.GeneralTitleHelp=View and edit general parameters for the cluster. Use the tabs to view and modify additional cluster parameters.
cluster.ClusterName=Cluster Name:
cluster.GMS=GMS
cluster.GMSHelp=When enabled, GMS services are started as a lifecycle module in each GlassFish Server instance in the cluster.
cluster.gmsMulticastPort=Multicast Port:
cluster.gmsMulticastPortHelp=Communication port that GMS uses to listen for group events.
cluster.gmsMulticastAddress=Multicast Address:
cluster.gmsMulticastAddressHelp=Address at which GMS listens for group events. Must be unique for each cluster.
cluster.gmsBindInterfaceAddress=Bind Interface Address:
cluster.gmsBindInterfaceAddressHelp=Network interface on the DAS to which GMS binds. Token must be defined in the {{gms-bind-interface-address}} property in the DAS configuration.
cluster.number.instance.running={0} instances are running {1}
cluster.number.instance.notRunning={0} instances are stopped {1}
cluster.number.instance.requireRestart={0} instances require restart {1}

cluster.ApplicationsTitleHelp=All instances in a cluster have the same set of deployed applications, for example, a Java EE application EAR file, a Web module WAR file, or an EJB JAR file.<br/>

cluster.InstancesTitle=Clustered Server Instances
cluster.InstancesTitleHelp=Create and manage clustered GlassFish Server instances for the current cluster.
cluster.instancesTableTitle=Server Instances

cluster.ResourcesTitle=Resources
cluster.ResourcesTitleHelp=All instances in a cluster have the same set of resources, resulting in the same JNDI namespace.
cluster.resourcesTableTitle=Resources

cluster.status.unknown=UNKNOWN


cluster.ApplicationsTitle=Applications
cluster.ApplicationsTitleHelp=Deploy, undeploy, enable, disable, and remove selected applications associated with the cluster. Removing the application only removes the application from this cluster. The application is not undeployed.
clusterApplications.TableTitle=Deployed Applications

clusterInstanceNew.PageTitle=New Clustered Server Instance
clusterInstanceNew.PageTitleHelp=Add a GlassFish Server instance to the current cluster. The new instance inherits its configuration from the parent cluster.
clusterInstance.PageTitle=General Information
instanceName=Instance Name:

#cluster.ColInstancesStopped=Instances Stopped
#cluster.ColInstancesRestart=Instances Requiring Restart
#
#cluster.ColNodeAgent=Node Agent
#cluster.ColInstanceName=Instance Name

##cluster.numStopped=Instances Stopped
#cluster.numRunning=Instances Running
#cluster.NewClusteredInstance=New Clustered Server Instance
#cluster.startLB=Enable Load Balancing
#cluster.quiesce=Quiesce...
#

### Standalone instance
standaloneInstances.PageTitle=Standalone Server Instances
standaloneInstances.PageTitleHelp=Create and manage standalone instances. Running instance cannot be deleted.
standaloneInstances.TableTitle=Server Instances
standalone.ColWeight=LB Weight

standaloneInstanceNew.PageTitle=New Standalone Server Instance
standaloneInstanceNew.PageTitleHelp=Create a standalone GlassFish Server instance. The instance is not a member of a cluster.

standalone.ApplicationsTitle=Applications
standalone.ApplicationsTitleHelp=Deploy, undeploy, enable, disable, and remove selected applications associated with the instance. Removing the application only removes the application from this stand-alone instance. The application is not undeployed.
standalone.InstanceName=Standalone Instance Name:
#standalone.tab.Resources=Resources
#standalone.tab.Monitor=Monitor
#standalone.tab.Advanced=Advanced
#standalone.tab.JBI=JBI
#standalone.PageTitle=Standalone Server Instances
#standalone.TableTitle=Server Instances
#standalone.PageHelp=The instance named server cannot be started, stopped or deleted from here. The node agent of the instance must be running to start or stop it.
#standalone.NameHelp=Name can be up to 255 characters, must be unique, and contain only alphanumeric, underscore, dash, or dot characters
#standalone.NewPageTitle=New Standalone Server Instance
#standalone.CopyConfig=Make a Copy of the Selected Configuration
#standalone.ReferenceConfig=Reference the Selected Configuration
#standalone.NodeAgent=Node Agent:
#standalone.NodeAgentStatus=Node Agent Status:
#standalone.Config=Configuration:
#standalone.GeneralPageHelp=To start or stop a GlassFish Server instance or to view its log file, its node agent must be running. Refer to the online help for more information.
#

common.NodeAgentCol=Node Agent
common.NodeCol=Node
common.ConfigurationCol=Configuration

nodes.PageTitle=Nodes
nodes.PageTitleHelp=A node represents a host on which the GlassFish Server software is installed. A node must exist for every host on which GlassFish Server instances reside.

nodes.TableTitle=Nodes
node.NameHelp=Unique name for the node. The name must not contain any reserved words or characters.
node.nodeHostCol=Node Host
node.nodeTypeCol=Type
node.NewPageTitle=New Node
node.NewPageTitleHelp=Create a node on which GlassFish Server instances can reside.
node.NodeHost=Node Host:
node.NodeHostHelp=Name of the host that the node represents. If the type is SSH, the node host is required.
node.NodeDir=Node Directory:
node.NodeDirHelp=Path to the directory that will contain files for instances created on this node. The default is "${com.sun.aas.productRoot}/glassfish/nodes".
node.sshConnectorSection=SSH
node.sshPort=SSH Port:
node.sshPortHelp=The port to use for SSH connections to this node's host. The default is 22.
node.sshAuthSection=SSH Authentication
node.UserName=SSH User Name:
node.UserNameHelp=The user that is to run the process for connecting to this node's host through SSH. The default is the user that is running the DAS process.
node.Keyfile=Key File:
node.KeyfileHelp=The absolute path to the user's SSH private key file. The default is id_rsa, id_dsa or identity in the user's .ssh directory.
node.EditPageTitle=Edit Node
node.EditPageTitleHelp=Edit properties for the selected node.
node.InstallDir=Installation Directory:
node.InstallDirHelp=The full path to the parent of the base installation directory of the GlassFish Server software on the host, for example, /export/glassfish3/.
node.force=Force:
node.forceHelp=Specifies whether the node is created even if validation of the node's parameters fails.
node.type=Type:
node.typeHelp=If the type is CONFIG, the node is not enabled for remote communication and the SSH information is removed from the page. To create instances on a remote node of type CONFIG, you must use the create-local-instance subcommand. You cannot use the Administration Console for this purpose.
tree.nodes=Nodes
node.error.delete=Error in deletion of nodes: {0}
nodes.instanceExistError=Node "{0}" referenced in GlassFish Server instances: {1}.  Remove the instances before deleting the node.
node.pswdAlias=Password Alias:
node.pswdAliasHelp=Select an existing password alias. If necessary, use the <a href="#{request.contextPath}/common/appServer/pswdAliases.jsf">Password Aliases page to create an alias.
node.password=SSH Password:
node.confirmPassword=Confirm SSH Password:
node.confirmPasswordHelp=Confirm the password that you typed in the SSH Password field.
node.enterPassword=SSH Password:
node.enterPasswordHelp=Type the password that the SSH user will use for logging in to the host that this node represents.
node.passwordAlias=Password Alias:
node.passwordAliasHelp=Select an existing password alias. If necessary, use the <a href=#{request.contextPath}/common/appServer/pswdAliases.jsf>Password Aliases page to create an alias.
node.selectPasswordSelect=SSH User Authentication:
node.selectPasswordSelectHelp=Select how the SSH user is authenticated when logging in to this node's host. 
node.noPassword=Key File
node.textPassword=Password
node.usePasswordAlias=Password Alias

node.error.removeLocalhost=Cannot remove Node {0}.

msg.JS.confirmDeleteNodes=Selected nodes will be deleted. Continue?
msg.JS.confirmDeleteClusters=Delete the selected clusters and their instances?
msg.JS.confirmStartCluster=Start the cluster?
msg.JS.confirmStopCluster=Stop the cluster?
msg.JS.confirmStartClusters=Start the selected clusters?
msg.JS.confirmStopClusters=Stop the selected clusters?
msg.JS.confirmStopInstances=Stop the selected GlassFish Server instances?
msg.JS.confirmStartInstances=Start the selected GlassFish Server instances?
msg.JS.confirmDeleteInstances=Selected instances will be deleted.  Continue?
msg.JS.confirmRotateLog=Log file will be rotated.  Continue?
msg.JS.confirmEmptyPswd=Set empty password for this SSH User?
msg.error.nameExists=The name {0} is already used by another instance, cluster, configuration or node.
msg.JS.nodeHostRequired=Enter a value for Node Host
# Manage Targets
manageTargets.PageTitle=Manage Targets
manageVS.PageTitle=Virtual Server Targets
manageTargets.PageHelp=Manage the clusters and stand-alone GlassFish Server instances on which the resource or application is available.
manageVS.PageHelp=Configure virtual server references for an application or resource.
manageTargets.AvailableTargets=Available Targets
manageTargets.SelectedTargets=Selected Targets
manageTargets.list=List of Targets
common.TargetTableTitle=Targets

resourcesTable.resources=Resources

#Cluster Instances
PropertiesTitle=Properties
SystemPropertiesTitle=System Properties

## Group Management Service
gms.TitlePage=Edit Group Management Service
gms.TitlePageHelp=Group Management Service (GMS) is an in-process service that provides cluster monitoring and group communication services.
gms.fdMax=Maximum Missed Heartbeats:
gms.fdMaxHelp=Maximum number of missed heartbeats from a member before GMS verifies that the member should be reported as a suspected failure.
gms.fdTimeout=Heartbeat Frequency:
gms.fdTimeoutHelp=Frequency that a group member's heartbeat is broadcast.
gms.pingTimeout=Group Discovery Timeout:
gms.pingTimeoutHelp=Period of time that GMS waits for the discovery of existing group members.
gms.vsTimeout=Failure Verification Wait Time:
gms.vsTimeoutHelp=Amount of time to wait before verifying that a member suspected to have failed should be reported as failed.
gms.Milliseconds=Milliseconds

# Availability Service
availability.seconds=Seconds
availabilty.TitlePage=Availability Service
availabilty.TitlePageHelp=Availability for the GlassFish Server instance
availability.AvailabilityTab=Availability Service
availability.jmsAvailabilityTab=JMS Availability
availability.webAvailabilityTab=Web Container Availability
availability.ejbAvailabilityTab=EJB Container Availability
availability.availabilityService=Availability Service:
availability.availabilityServiceHelp=Enables the instance-level availability service. Use the Web, EJB, and JMS tabs to override default availability settings.
availability.storePoolName=Store Pool Name:
availability.storePoolNameHelp=JNDI name for the JDBC resource of the database that provides availability; must contain only alphanumeric, underscore, dash, or dot characters.
availability.haStoreName=HA Store Name:
availability.haStoreNameHelp=Name of the session store; must contain only alphanumeric, underscore, dash, or dot characters.
availability.haAgentHosts=HA Agent Hosts:
availability.haAgentHostsHelp=Comma-delimited list of server host names or IP addresses; names must contain only alphanumeric, underscore, dash, or dot characters.
availability.haAgentPort=HA Agent Port:
availability.haAgentPortHelp=Port number where highly available store management agents can be contacted.
availability.haAgentPassword=HA Agent Password:
availability.autoManage=Auto Manage Store:
availability.autoManageHelp=Select to match the lifecycle of the highly available store with the lifecycle of the highly available cluster.
availability.storeHealthCheck=Store Health Check:
availability.storeHealthCheckHelp=Select to enable periodic detection of store service availability.
availability.haStoreHealthCheck=HA Store Health Check:
availability.haStoreHealthCheckHelp=Frequency at which store health is checked.


Other Glassfish examples (source code examples)

Here is a short list of links related to this Glassfish Strings.properties source code file:

... this post is sponsored by my books ...

#1 New Release!

FP Best Seller

 

new blog posts

 

Copyright 1998-2021 Alvin Alexander, alvinalexander.com
All Rights Reserved.

A percentage of advertising revenue from
pages under the /java/jwarehouse URI on this website is
paid back to open source projects.