Glassfish example source code file (LogStrings.properties)
The Glassfish LogStrings.properties source code#
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
#
# Copyright (c) 2010 Oracle and/or its affiliates. All rights reserved.
#
# The contents of this file are subject to the terms of either the GNU
# General Public License Version 2 only ("GPL") or the Common Development
# and Distribution License("CDDL") (collectively, the "License"). You
# may not use this file except in compliance with the License. You can
# obtain a copy of the License at
# https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
# or packager/legal/LICENSE.txt. See the License for the specific
# language governing permissions and limitations under the License.
#
# When distributing the software, include this License Header Notice in each
# file and include the License file at packager/legal/LICENSE.txt.
#
# GPL Classpath Exception:
# Oracle designates this particular file as subject to the "Classpath"
# exception as provided by Oracle in the GPL Version 2 section of the License
# file that accompanied this code.
#
# Modifications:
# If applicable, add the following below the License Header, with the fields
# enclosed by brackets [] replaced by your own identifying information:
# "Portions Copyright [year] [name of copyright owner]"
#
# Contributor(s):
# If you wish your version of this file to be governed by only the CDDL or
# only the GPL Version 2, indicate your decision by adding "[Contributor]
# elects to include this software in this distribution under the [CDDL or GPL
# Version 2] license." If you don't indicate a single choice of license, a
# recipient has the option to distribute your version of this file under
# either the CDDL, the GPL Version 2 or to extend the choice of license to
# its licensees as provided above. However, if you add GPL Version 2 code
# and therefore, elected the GPL Version 2 license, then the option applies
# only if the new code is made subject to such option by the copyright
# holder.
#
J2EE.cannot_load_resources=RAR5003:Error loading J2EE resource file
xaresource.recover_error=RAR5004:Error in XA recovery. See logs for more details.
RAR5004.diag.cause.1=Jdbc driver threw an exception while recovery.
RAR5004.diag.cause.2=Resource Adapter threw an exception while recovery in case of connectors.
RAR5004.diag.check.1=Check database or EIS log for details.
RAR5004.diag.check.2=Check whether the connection pool configuration is proper.
RAR5004.diag.check.3=Check whether domain.xml is accessible.
datasource.xadatasource_error=RAR5005:Error in accessing XA resource with JNDI name [{0}] for recovery
RAR5005.diag.cause.1=The XA resource has been deleted before attempting recovery
RAR5005.diag.cause.2=The XA resource is no longer referenced in the domain.xml
RAR5005.diag.cause.3=The database server that the XA resource points to is no longer running
RAR5005.diag.cause.4=The configuration information for the XA Resource has been changed before attempting recovery
RAR5005.diag.check.1=Check that the XA Resource and the pool it points to is still defined in the domain.xml
RAR5005.diag.check.2=Check that the XA Resource is present in the list of resource-refs in the domain.xml
RAR5005.diag.check.3=Check that the Database server is up and running
RAR5005.diag.check.4=Check if the config info of the XA resource and the pool it points to is sane. In particular check that the datasourceclassname in the pool is correct and the XA resource points to the correct pool
datasource.xadatasource_error_excp=RAR5042:Error in accessing XA resource for recovery
RAR5042.diag.cause.1=The XA resource has been deleted before attempting recovery
RAR5042.diag.cause.2=The XA resource is no longer referenced in the domain.xml
RAR5042.diag.cause.3=The database server that the XA resource points to is no longer running
RAR5042.diag.cause.4=The configuration information for the XA Resource has been changed before attempting recovery
RAR5042.diag.check.1=Check that the XA Resource and the pool it points to is still defined in the domain.xml
RAR5042.diag.check.2=Check that the XA Resource is present in the list of resource-refs in the domain.xml
RAR5042.diag.check.3=Check that the Database server is up and running
RAR5042.diag.check.4=Check if the config info of the XA resource and the pool it points to is sane. In particular check that the data source class name in the pool is correct and the XA resource points to the correct pool
poolmgr.datasource_error=RAR5007:Error in creating data source object: [{0}]
RAR5007.diag.cause.1=Exception while creating persistent manager resource.
RAR5007.diag.check.1=Check whether the persistent manager factory class is configured properly and is available in the classpath.
RAR5007.diag.check.2=Check whether the jdbc resource name is correct and is configured properly.
poolmgr.datasource_error_excp=RAR5043:Error in creating data source object:
RAR5043.diag.cause.1=Exception while creating persistent manager resource.
RAR5043.diag.check.1=Check whether the persistent manager factory class is configured properly and is available in the classpath.
RAR5043.diag.check.2=Check whether the jdbc resource name is correct and is configured properly.
customrsrc.create_ref_error=RAR5008:Error in creating a naming Reference for custom resource [{0}]
RAR5008.diag.cause.1=Naming provider and port are not set in the initial context
RAR5008.diag.cause.2=The Naming provider is not up
RAR5008.diag.check.1=Check the jndi.properties file has the naming provider host and port specified
RAR5008.diag.check.2=Check if the naming provider is up and listening on the port specified in the domain.xml
customrsrc.create_ref_error_excp=RAR5045:Error in creating a naming Reference for custom resource
RAR5045.diag.cause.1=Naming provider and port are not set in the jndi provider's property file
RAR5045.diag.cause.2=The Naming provider is not up
RAR5045.diag.check.1=Check the jndi.properties file has the naming provider host and port specified
RAR5045.diag.check.2=Check if the naming provider is up and listening on the port specified in the domain.xml
jndi.factory_load_error=RAR5009:Cannot load external-jndi-resource factory-class ''[{0}]''
RAR5009.diag.cause.1=Could not create an instance of factory-class.
RAR5009.diag.check.1=Make sure that factory-class name is configured correctly.
RAR5009.diag.check.2=Make sure that factory-class is available in the classpath of the application server
jndi.factory_class_unexpected=RAR5010:external-jndi-resource factory-class ''[{0}]'' must be of type javax.naming.spi.InitialContextFactory
RAR5010.diag.cause.1=External JNDI resource has a wrong factory-class configuration
RAR5010.diag.check.1=Verify that factory class is an instance of javax.naming.spi.InitialContextFactory
jndi.initial_context_error=RAR5011:Exception thrown creating initial context for external JNDI factory ''[{0}]''
RAR5011.diag.cause.1=Could not create Initial Context.
RAR5011.diag.check.1=Make sure that the external-jndi-resource configuration is sufficient to create an initial context.
jndi.initial_context_error_excp=RAR5047:Exception thrown creating initial context for external JNDI factory [{0}]
RAR5047.diag.cause.1=Could not create Initial Context.
RAR5047.diag.check.1=Make sure that the external-jndi-resource configuration is sufficient to create an initial context.
jndi.factory_create_error=RAR5012:Cannot create external-jndi-resource factory-class ''[{0}]''
RAR5012.diag.cause.1=Could not create Initial context factory.
RAR5012.diag.check.1=Make sure that the external-jndi-resource configuration is sufficient to create an initial context factory
jndi.factory_install_error=RAR5013:Error in installing connection factories
poolmgr.load_error=RAR5014:Cannot load class [{0}].
classloader.load_class_fail=RAR5015:Unexpected exception in loading class [{0}] by classloader
RAR5015.diag.cause.1=Classpath is not properly set in the domain.xml
RAR5015.diag.cause.2=The application server process does not have read permissions on the directory that holds the classes/jar
RAR5015.diag.check.2=You do not have read permissions on the directory that holds the classes/jar
RAR5015.diag.check.1=Check that the classpath attribute in the java-config includes a reference to the jar/package directory for the class
classloader.load_class_fail_excp=RAR5046:Unexpected exception in loading class by classloader [{0}]
RAR5046.diag.cause.1=Classpath is not properly set in the domain.xml
RAR5046.diag.cause.2=You do not have read permissions on the directory that holds the classes/jar
RAR5046.diag.check.1=Check that the classpath attribute in the java-config includes a reference to the jar/package directory for the class
RAR5046.diag.check.2=Check that the directory where the classes/jars reside have read permission for the application server process
poolmgr.config_access_error=RAR5016:Error accessing configuration file.
jndi.connection_cannot_get=RAR5017:Cannot locate connection descriptor by name
jndi.connection_create_error=RAR5018:Cannot create connection factory
rsrc.file_create_error=RAR5019:Unexpected exception in creating new file
jndi.persistence_manager_config=RAR5020:Error in Persistence Manager Settings [{0}]
RAR5020.diag.cause.1=Could not configure persistence manager resource properly.
RAR5020.diag.check.1=Make sure that the Jdbc resource name, you have configured is correct
RAR5020.diag.check.2=Check whether the persistence manager factory class is proper.
RAR5020.diag.check.3=Check whether the persistence manager factory class has a setConnectionFactoryName method.
jndi.persistence_manager_config_excp=RAR5044:Error in Persistence Manager Settings
RAR5044.diag.cause.1=Could not configure persistence manager resource properly.
RAR5044.diag.check.1=Make sure that the Jdbc resource name, you have configured is correct
RAR5044.diag.check.2=Check whether the persistence manager factory class is proper.
RAR5044.diag.check.3=Check whether the persistence manager factory class has a setConnectionFactoryName method.
poolmgr.resource_adapter_error=RAR5021:Error in installing resource adapters
jndi.bind_error=RAR5022:Error in binding to JNDI namespace
jndi.remove_connection_factory_error=RAR5023:Error removing connection factory
J2EE.add_resource_error=RAR5024:Error adding J2EE resource
J2EE.remove_resource_error=RAR5025:Error removing J2EE resource
poolmgr.complete_transaction_error=RAR5026:Failed to complete transaction.Error Message: [{0}].
RAR5026.diag.cause.1=Internal error while completing the transaction.
poolmgr.unexpected_exception=RAR5027:Unexpected exception in resource pooling
RAR5027.diag.cause.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
poolmgr.component_register_exception=RAR5029:Unexpected exception while registering component
RAR5029.diag.cause.1=Internal error while registering the resource to the transaction.
poolmgr.sync_register_exception=RAR5030:Unexpected exception while registering synchronization
RAR5030.diag.cause.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
poolmgr.system_exception=RAR5031:System Exception
RAR5031.diag.cause.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
poolmgr.resource_return_error=RAR5032:Unexpected exception while returning resource to pool
poolmgr.assert_exception=RAR5033:ASSERT FAILED!!!
poolmgr.pool_resize_error=RAR5034:Failed to resize pools
poolmgr.destroy_resource_failed=RAR5035:Unexpected exception while destroying resource from pool {0}. Exception message: {1}
RAR5035.diag.cause.1=Error while closing the physical connection.
RAR5035.diag.cause.2=Error while destroying the connector managed connection.
RAR5035.diag.check.1=Refer to the manual of the resource that is pooled (JDBC driver or Resource Adapter).
RAR5035.diag.check.2=To get exception stack, please change log level to FINE. Examine this exception stack trace for details.
poolmgr.no_resource_reference=RAR5036:Resource reference is not defined for JNDI name [{0}]
poolmgr.password_info_warning=RAR5037:Username/password not specified for resource reference [{0}]. Defaulting to one in the pool.
poolmgr.create_resource_error=RAR5038:Unexpected exception while creating resource for pool {0}. Exception : {1}
RAR5038.diag.cause.1=Could not create a physical connection.
RAR5038.diag.check.1=Connection pool is configured incorrectly.
RAR5038.diag.check.2=Database is running properly.
RAR5038.diag.check.3=EIS (in case of connectors) is running properly.
RAR5038.diag.check.4=SJS MQ (in case of JMS) is running properly.
RAR5038.diag.check.5=Network connection to Database/EIS/MQ is proper.
RAR5038.diag.check.6=Check linked exception (if there was a linked exception it is logged after this message).
poolmgr.create_resource_linked_error=RAR5039:Linked exception : {0}
RAR5408.diag.check.1=Check if the JDBC resource being accessed is present in the domain.xml
RAR5408.diag.check.2=Please contact Sun Microsystems with the complete error log
poolmgr.invalid_connection=RAR5053:underlying connection not valid
rsrc.missing_parameter_in_file=RAR5055:Missing parameter in properties file [{0}].
resource_pool.resize_pool_error=RAR5058: Error while Resizing pool {0}. Exception : {1}
RAR5058.diag.cause.1=Could not create physical connection during connection pool resizing.
RAR5058.diag.check.1=Check your database/ EIS logs for possible connection creation errors.
RAR5058.diag.check.2=Check whether your network connection to the database or EIS is proper.
RAR6034.diag.cause.1=Resource Adapter Name of the admin object configuration is wrong
RAR6034.diag.check.1=Check whether the resource adapter is deployed.
poolmgr.get_connection_failure=RAR5117 : Failed to obtain/create connection from connection pool [ {0} ]. Reason : {1}
RAR5117.diag.cause.1=Error while obtaining a connection from the pool.
RAR5117.diag.check.1=Check your connection pool configuration.
rardeployment.invalid_connector_desc=RAR6000 : Invalid deployment descriptor, no connection-definition found either via ra.xml or annotations for the resource-adapter [ {0} ]
RAR6000.diag.cause.1=Illegal access Error while instantiating one of the resource adapter java beans like ManagedConnectionFactory or ResourceAdapter Javabean classes.
RAR6000.diag.check.1=Check whether the resource adapter have any specific security requirements..
rardeployment.class_not_found=RAR6001 : Class Not found : {0}
RAR6001.diag.cause.1=Error while locating one of the resource adapter java beans like ManagedConnectionFactory or ResourceAdapter Javabean classes.
RAR6001.diag.check.1=Resource adapter is bundled properly.
RAR6001.diag.check.2=Resource adapter jar file deployment descriptor specifies correct class names.
rardeployment.class_instantiation_error=RAR6002 : Could not instantiate class : {0}
RAR6002.diag.cause.1=Error while instantiating one of the resource adapter java beans like ManagedConnectionFactory or ResourceAdapter Javabean.
RAR6002.diag.check.1=Resource adapter is bundled properly with all the classes.
rardeployment.illegalaccess_error=RAR6003 : Could not access class : {0}
rardeployment.privilegedaction_error=RAR6004 : Privileged action error : {0}
RAR6004.diag.cause.1=Illegal access Error while instantiating one of the resource adapter java beans like ManagedConnectionFactory or ResourceAdapter Javabean classes.
RAR6004.diag.check.1=Check whether the resource adapter have any specific security requirements..
rardeployment.mcfcreation_error=RAR6005 : Could not create mcf : {0}
RAR6005.diag.cause.1=Error while creating ManagedConnectionFactory.
RAR6005.diag.check.1=Resource adapter is bundled properly.
RAR6005.diag.check.2=Check whether connection pool configuration has correct properties for MCF.
RAR6005.diag.check.3=Check resource adapter documentation for configuring correct properties of MCF.
rardeployment.resourcesutil_get_failure=RAR6006 : Failed to get ResourcesUtil object : {0}
RAR6006.diag.check.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
rardeployment.resources_list_error=RAR6007 : Failed to get Resources list from domain.xml
RAR6007.diag.cause.1=Runtime could not obtain list of resources of this resource adapter.
RAR6007.diag.check.1=Check whether the resource adapter configuration is proper.
rardeployment.ra_removal_registry_failure=RAR6008 : Failed to remove Active Resource Adapter from registry {0}
RAR6008.diag.cause.1=Resource Adapter threw an exception during ResourceAdapter.stop() method.
RAR6008.diag.check.1=Check your resource adapter documentation about ResourceAdapter.stop() method.
rardeployment.pools_and_resources_exist=RAR6009 : Connector Connection Pools/resources still exist. Remove all the connector connection pools and resources before undeploying rar : {0}
RAR6009.diag.cause.1=A resource (connection pool, connector resource or admin object) pertaining to the resource adapter is existing.
RAR6009.diag.check.1=Check whether the cascade option of undeploy is false.
rardeployment.resourceadapter.already.started=RAR6010 : Resource Adapter is already started/deployed : {0}
RAR6010.diag.cause.1=Resource Adapter is already active in the connector runtime.
RAR6010.diag.check.1=Check whether a previous resource adapter deployment is still available.
rardeployment.failed_toget_classloader=RAR6011 : Failed to obtain the classloader : {0}
RAR6011.diag.check.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
rardeployment.nullPointerException=RAR6012 : Null pointer Exception : {0}
RAR6012.diag.check.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
RAR6012.diag.check.2=Check whether resource adapter threw a null pointer exception.
rardeployment.jndi_publish_failure=RAR6013 : Could not publish connector descriptor in JNDI : {0}
RAR6013.diag.check.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
rardeployment.connector_descriptor_notfound=RAR6014 : Could not find the connector descriptor in the rar : {0}
RAR6014.diag.cause.1=Incomplete or erroneous resource adapter deployment.
RAR6014.diag.check.1=Check whether the RA deployment is proper and complete.
rardeployment.connectionpool_object_null=RAR6015 : Obtained Null connection pool object from jndi : {0}
RAR6015.diag.cause.1=Connection pool is not created properly.
RAR6015.diag.check.1=Check your resource configuration, whether you are using correct connection pool name.
rardeployment.resourceadapter_not_initialized=RAR6016 : Active resource adapter not initialized.Rar Name : {0}
RAR6016.diag.cause.1=Resource Adapter is not yet initialized in the connector runtime.
RAR6016.diag.check.1=Check whether the deployment of the resource adapter is complete.
rardeployment.jndi_lookup_failed=RAR6017 : Failed to get connection pool object {0} via JNDI lookup : {1}
RAR6017.diag.cause.1=Incomplete or erroneous connection pool creation.
RAR6017.diag.check.1=Check whether connection pool is created and is proper.
rardeployment.mcf_add_toregistry_failed=RAR6018 : Failed to add MCF to connector registry : {0}
rardeployment.connector_descriptor_notfound_registry=RAR6019 : Failed to get connector descriptor from registry. RarName : {0}
RAR6019.diag.cause.1=Incomplete or erroneous resource adapter deployment.
RAR6019.diag.check.1=Check whether the RA deployment is proper and complete.
rardeployment.pool_jndi_bind_failure=RAR6020 : Failed to publish connection pool object in JNDI : {0}
RAR6020.diag.check.1=Check whether the connection pool is existing.
rardeployment.mcf_creation_failure=RAR6021 :Failed to create MCF : {0}
RAR6021.diag.cause.1=Error while creating ManagedConnectionFactory.
RAR6021.diag.check.1=Resource adapter is bundled properly.
RAR6021.diag.check.2=Check whether connection pool configuration has correct properties for MCF.
RAR6021.diag.check.3=Check whether the resource adapter require security permissions to load the classes. Some adapters require getClassLoader() permission.
rardeployment.mcf_registration_failure=RAR6022 : Failed to register MCF in connector registry : {0}
RAR6022.diag.cause.1=NullPointerException while creating ManagedConnectionFactory.
RAR6022.diag.check.1=Check whether resource adapter throws null pointer exception.
rardeployment.null_mcf_in_registry=RAR6023 : Null connector descriptor in registry. Module Name is : {0}
RAR6023.diag.check.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
rardeployment.connector_resource_bind_failure=RAR6024 : Failed to bind connector resource in JNDI: {0}
rardeployment.connector_descriptor_read_error=RAR6025 : Failed to read the connector deployment descriptors : {0}
RAR6025.diag.cause.1=Could not read the deployment descriptor of the resource adapter.
RAR6025.diag.check.1=Check whether the resource adapter is packaged correctly.
RAR6025.diag.check.2=Check the correctness of deployment descriptor.
rardeployment.connector_descriptor_parse_error=RAR6026 : Failed to parse the connector deployment descriptors : {0}
RAR6026.diag.cause.1=Could not parse the deployment descriptor of the resource adapter.
RAR6026.diag.check.1=Check whether the resource adapter is packaged correctly.
RAR6026.diag.check.2=Check the correctness of deployment descriptor.
rardeployment.malfarmed_url_for_classloader=RAR6027 : Malformed URL to add to path of classloader : {0}
RAR6027.diag.check.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
rardeployment.non_1.5_compliant_rar=RAR6028 : This adapter is not 1.5 compliant : {0}
RAR6028.diag.cause.1=Resource Adapter doesnt contain resource adapter java bean.
RAR6028.diag.check.1=Make sure that the resource adapter is 1.5 compliant.
rardeployment.admin_object_delete_failure=RAR6029 : Failed to delete admin object from jndi : {0}
rardeployment.mcf_removal_failure=RAR6030 : Failed to remove the MCF : {0}
RAR6030.diag.cause.1=MCF cleanup in connector runtime failed.
RAR6030.diag.check.1=Check whether connection pool has already been deleted.
RAR6030.diag.check.2=There is an internal server error. Please contact Sun Microsystems with the complete log message
rardeployment.connectionpool_removal_from_jndi_error=RAR6031 : Failed to unbind connectionPool from jndi : {0}
RAR6031.diag.check.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
loading.wrong_resources_entry=RAR6032 : Wrong connector resource entry in the domain.xml. No corresponding connection pool created. Pool Name:
RAR6032.diag.cause.1=Connection Pool Name of the Resource configuration is wrong.
RAR6032.diag.check.1=Check whether the connection pool is created.
loading.wrong_connectorpool_entry=RAR6033 : Wrong connector connection pool entry in the domain.xml. No corresponding resource adapter deployed. Resource Adapter Name :
loading.wrong_adminobject_entry=RAR6034 : Wrong admin object entry in the domain.xml. No corresponding resource adapter deployed. Resource Adapter Name :
rardeployment.start_failed=RAR6035 : Resource adapter start failed : {0}
RAR6035.diag.cause.1=Could not start the resource adapter instance.
RAR6035.diag.cause.2=ResourceAdpater threw an exception during ResourceAdapter.start()
RAR6035.diag.check.1=Check whether the domain.xml is accessible.
RAR6035.diag.check.2=Check your resource adapter documentation for possible causes of failure during ResourceAdapter.start()
rardeployment.assoc_failed=RAR6036 : Resource adapter association failed : {0}
RAR6036.diag.cause.1=Resource Adapter throws exception during ManagedConnectionFactory.setResourceAdapter()
RAR6036.diag.check.1=If you are using third party resource adapter, contact resource adapter vendor.
RAR6036.diag.check.2=If you are a resource adapter developer, please check the resource adapter code.
rardeployment.stop_warning=RAR6037 : Resource adapter threw an exception while stopping
RAR6037.diag.cause.1=Resource Adapter threw an exception during ResourceAdapter.stop() method.
RAR6037.diag.check.1=Check your resource adapter documentation about ResourceAdapter.stop() method.
jmsra.upgrade_check_failed=RAR7000 : Check for a new version of MQ installation failed : {0}
RAR7000.diag.cause.1=MQ resource adapter in the upgraded MQ is not accessible.
RAR7000.diag.cause.2=Could not read the manifest of New MQ resource adapter file.
jmsra.upgrade_failed=RAR7001 : Upgrading a MQ resource adapter failed : {0}
RAR7001.diag.cause.1=Could not unzip the MQ resource adapter archive from upgraded MQ.
RAR7001.diag.check.1=Check whether new MQ resource adapter archive in imq_home/lib is accessible.
jmsra.upgrade_started=RAR7002 : MQ Resource adapter upgrade started.
jmsra.upgrade_completed=RAR7003 : MQ Resource adapter upgrade completed.
endpointfactory.unavailable=RAR7004 : MDB deployment is still happening. Cannot create end point now.
RAR7004.diag.cause.1=Resource Adapter is requesting endpoints to the MDB, before MDB deployment is complete.
endpointfactory.loader_not_found=RAR7005 : Class loader not found : [{0}]
RAR7005.diag.cause.1=Could not access the class loader specific to the MDB.
endpointfactory.as_validate_Failed=RAR7006 : ActivationSpec validation failed : [{0}]
RAR7006.diag.cause.1=ActivationSpec validation failed.
RAR7006.diag.check.1=Check your JMS related configuration in MDB deployment descriptor.
RAR7006.diag.check.2=Check your activation configuration in the MDB deployment descriptor.
endpointfactory.method_not_defined=RAR7007 : The method is not defined : [{0}]
RAR7007.diag.cause.1=Resource Adapter is trying to invoke an unknown method during message delivery.
RAR7007.diag.check.1=Check your resource adapter documentation for possible issues during message delivery.
no.such.method=RAR8000 : The method {0} is not present in the class : {1}
RAR8000.diag.check.1=Check the error message to see which class doesn't have the method.
RAR8000.diag.check.2=Check the connection pool configuration property names.
RAR8000.diag.check.3=Check the jms resource configuration property names.
RAR8000.diag.check.4=Check the admin object resource configuration property names.
RAR8000.diag.check.5=Check the resource adapter configuration property names.
error.execute.method=RAR8001 : Error in executing the method : {0}
RAR8001.diag.check.1=Check the error message to see which class has failed to execute the method.
RAR8001.diag.check.2=Check the connection pool configuration property names and values.
RAR8001.diag.check.3=Check the jms resource configuration property names. and values
RAR8001.diag.check.4=Check the admin object resource configuration property names and values.
RAR8001.diag.check.5=Check the resource adapter configuration property names and values.
poolmon.cnfe=RAR8002 : Class Not Found : {0}
RAR8002.diag.check.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
poolmon.cannot_reg=RAR8003 : Cannot register pool from monitoring registry: {0}
RAR8003.diag.check.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
poolmon.cannot_unreg=RAR8004 : Cannot unregister pool from monitoring registry: {0}
RAR8004.diag.check.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
reconfig.cannot_get_mcf=RAR8005: Cannot get MCF for pool : {0}
poolmon.error_registering_listener=RAR8007 : Error registering MonitoringLevelListener in monitoring registry. The Exception is: {0}
RAR8007.diag.check.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
poolmon.init_monitoring_registry=RAR7008 : Initialized monitoring registry and listeners
RAR7008.diag.check.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
isReferenced.unexpectedException=RAR7011: Unexpected exception determining whether resource is referenced.
RAR7011.diag.check.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
resource_adapter_stop_status=RAR7012: J2EE Connector 1.5 specification compliant Resource Adapter stop() status
rar_stop_call_successful=RAR7013: Resource Adapter stop() call successful
rardeployment.incorrect_tx_support=RAR7092 : Incorrect transaction support level. This RAR has a lower tx support level in its ra.xml transaction-support attribute : {0}
RAR7092.diag.cause.1=The ra.xml specifies LocalTransaction as the transaction-support and connection-pool is configured with XATransaction support.
RAR7092.diag.cause.2=The ra.xml specifies NoTransaction as the transaction-support and connection-pool is configured with XATransaction or LocalTransaction support.
managed_con.cleanup-failed=RAR7093 : Error while cleaning up ManagedConnection
RAR7093.diag.check.1=There is an internal server error. Please contact Sun Microsystems with the complete log message
ra.stop-successful=RAR7094: {0} shutdown successful.
ra.stop-unsuccessful=RAR7095: {0} shutdown unsuccessful. Please refer the server and/or resource adapter logs for more information.
RAR7095.diag.cause.1=The resource adapter failed to shutdown within the specified shutdown timeout.
RAR7095.diag.check.1=Check the resource adapter and server logs for any exceptions during resource adapter stop.
RAR7095.diag.check.2=Increase the shutdown-timeout-in-seconds attribute of connector-service if the resource adapter requires a longer time to shutdown.
rardeployment.exception_on_invoke_setter=RAR7096: Exception {2} while trying to set the value {1} on property {0}
RAR7096.diag.cause.1=Error while trying to invoke the setter method for the specified property.
RAR7096.diag.check.1=Check if the value and the property name specified are valid.
rardeployment.no_setter_method=RAR7097: No setter method present for the property {0} in the class {1}
RAR7097.diag.cause.1=Error in finding a mutator method for the specified property
RAR7097.diag.check.1=Check if the property has been specified correctly and an appropriate public setter method [method] is available in the class.
conmgr.mcf_not_equal=RAR7099: The mcf being used to allocate the connection and the MCF in the pool are not equal.
RAR7099.diag.cause.1=The configuration parameters like username/password for the Pool being accessed are changed and the application has not been redeployed
RAR7099.diag.cause.2=The MCF equals method is improperly implemented
RAR7099.diag.check.2=Ensure that your resource adapter properly implements the equals method
jmservice.destination.autocreated=RAR7100: Physical destination {0} is auto-created by application server.
jmservice.destination.autocreatefailed= RAR7101: Auto-creation of physical destination {0} failed.
RAR7101.diag.cause.1=Creation of physical destination in SJS MQ failed. Please look at SJS MQ log for more details.
RAR7101.diag.cause.2=You haven't configured jms-service properly. Make sure that default-jms-host of jms-service points to a valid SJS MQ location.
jmsservice.defaulthost.notconfigured=RAR7102: Default-jms-host of jms-service is not configured properly. Using the first jms-host as the default-jms-host.
RAR7102.diag.cause.1=You haven't configured default-jms-host in the jms-service.
RAR7102.diag.cause.2=The jms-host configured as default-jms-host is not not available.
jmservice.destination.already.autocreated=RAR7103: The physical destination {0} is already created.
Derby.Shutdown.Exception=RAR7104: Exception while stopping Derby :
RAR7104.diag.cause.1=Embedded Derby will always throw this exception when the database is shutdown
Derby.Driver.Not.Found=RAR7105: Derby Embedded Driver not found :
RAR7105.diag.cause.1=Derby embedded driver class is not found in classpath
conn_pool_obj_utils.lazy_enlist-lazy_assoc-invalid-combination=RAR7106: LazyConnectionEnlistment need to be true for LazyConnectionAssociation to work, for pool: {0}
RAR7106.diag.cause.1=Connection Pool properties, LazyConnectionAssociation is true and LazyConnectionEnlistment is false which is not allowed.
unable_to_get_password_from_alias=RAR7107: Unable to retrieve password from alias
RAR7107.diag.cause.1=Alias may not exist. Ensure that alias exists.
error.loading.jms.resources.during.recovery=RAR7108: Error while loading jms resources during recovery : {0}
RAR7108.diag.cause.1=Error getting jms resource configs.
RAR7108.diag.cause.2=Lookup failed for the jms resource. Not found in jndi.
RAR7108.diag.check.1=See server log for more information
error.loading.jdbc.resources.during.recovery=RAR7109: Error while loading jdbc resources during recovery : {0}
RAR7109.diag.cause.1=Error getting jdbc resource configs.
RAR7109.diag.cause.2=Lookup failed for the jdbc resource. Not found in jndi.
RAR7109.diag.check.1=See server log for more information
error.loading.connector.resources.during.recovery=RAR7110: Error while loading connector resources during recovery : {0}
RAR7110.diag.cause.1=Error getting connector resource configs.
RAR7110.diag.cause.2=Lookup failed for the connector resource. Not found in jndi.
RAR7110.diag.cause.3=Error loading the embedded RAR.
RAR7110.diag.check.1=See server log for more information
resource_pool.remove_max_used_conn=RAR7113: destroying connection since it has reached the maximum usage of : {0}
pool.datastructure.init.failure.exception=RAR7123: Unable to initialize custom pool data-structure. Exception occurred :
pool.waitqueue.init.failure.exception=RAR7124: Unable to initialize connection pool wait-queue. Exception occurred :
pool.resource.gateway.init.failure.exception=RAR7125: Unable to initialize connection pool resource-gateway. Exception occurred :
CCP.ValidateAtmostEveryIdleSecs.Set=ValidateAtmostEveryIdleSecs property set for pool : {0}
endpoint.determine.destinationtype=RAR7126: Assuming destination type {0} for MDB {2} from administered object {1}
resource_pool.failed_creating_resource=RAR7127: Unable to create a new resource : {0}
connection_sharing_start=ConnectorXAResource.start() - associating connection : {0}
connection_sharing_end=ConnectorXAResource.end() called
connection_sharing_reset_association=ConnectorXAResource.resetAssociation() - dissociating connection : {0}
poolmgr.err_enlisting_res_in_getconn=RAR7132: Unable to enlist the resource in transaction. Returned resource to pool. Pool name: [ {0} ]
rardeployment.connectorresource_removal_from_jndi_error=RAR7133: Unable to remove resource [ {0} ] from jndi
rardeployment.no_module_deployed=RAR7134: RAR [ {0} ] is not deployed
rardeployment.connector_descriptor_jndi_removal_failure=RAR7135: Unable to remove connector-descriptor of resource-adapter [{0}] from jndi
method.name.nogetterforproperty=No getter for property [ {0} ] of class [ {1} ]
rardeployment.defaultpoolresourcecreation.failed=RAR7137: Unable to create default resource for the resource-adapter
rar.undeployment.default_pool_delete_fail=RAR7138: Unable to undeploy the default pool [ {0} ]
rar.undeployment.default_resource_delete_fail=RAR7139: Unable to undeploy the default resource [ {0} ]
rardeployment.logwriter_error=RAR7140: Unable to set log-writer for resource-adapter [ {0} ] : {1}
rar.undeployment.sun_ra_pool_delete_fail=RAR7141: Unable to undeploy the sun-ra pool [ {0} ]
enterprise_util.connector_malformed_url=RAR7142: Connector classloader unable to add files to classpath
no_resource=RAR7143: could not find a resource by name : {0}
enterprise_util.remove_connector=RAR7144: The Connector module {0} has been removed. Please redeploy all applications that are using this connector module's resources.
workmanager.instantiation_error=RAR7145: Unable to obtain work manager :
tx.sync.registry.lookup.failed=RAR7146: Unable to obtain transaction synchronization registry :
jdbc.pool_not_reachable=RAR7010: Pool not reachable.
RAR7010.diag.cause.1=Could not find the connection pool specified.
RAR7010.diag.check.1=Check whether the connection pool creation was successful.
RAR7010.diag.check.2=Check whether the pool name used is correct.
exception_cancelling_timer=RAR8010: Exception while cancelling timer : {0}
exception_purging_timer=RAR8011: Exception during timer purge : {0}
exception_scheduling_timer=RAR8012: Exception while scheduling timer : {0}
RAR8012.diag.cause.1=Timer could have already been cancelled because of any unchecked exception
recovery.jdbc-resource.destroy-error=RAR8013: Unable to destroy a jdbc resource during transaction recovery
RAR8013.diag.check.1=Check server.log for any resource specific exceptions
conn_pool_obj_utils.pooling_disabled_assocwiththread_invalid_combination=RAR8014: Associate with thread need to be false for Pooling disable to work, for pool: {0}
RAR8014.diag.cause.1=Connection Pool properties, Associate with thread is true and Pooling is disabled which is not allowed.
conn_pool_obj_utils.pooling_disabled_conn_validation_invalid_combination=RAR8015: Connection validation is set to true and Pooling is disable, for pool: {0}
RAR8015.diag.cause.1=Connection validation is useful only in a pooled environment.
conn_pool_obj_utils.pooling_disabled_validate_atmost_once_invalid_combination=RAR8016: Validate At most once period is set when Pooling is disabled, for pool : {0}
RAR8016.diag.cause.1=Validate at most once period is useful only in a pooled environment.
conn_pool_obj_utils.pooling_disabled_match_connections_invalid_combination=RAR8017: Match Connections is set to true when Pooling is disabled, for pool : {0}
RAR8017.diag.cause.1=Match Connections is useful only in a pooled environment.
conn_pool_obj_utils.pooling_disabled_max_conn_usage_invalid_combination=RAR8018: Max Connection usage is set when Pooling is disabled, for pool : {0}
RAR8018.diag.cause.1=Max Connection Usage is useful only in a pooled environment.
conn_pool_obj_utils.pooling_disabled_idle_timeout_invalid_combination=RAR8019: Idle Timeout is specified when Pooling is disabled, for pool : {0}
RAR8019.diag.cause.1=Idle Timeout is useful only in a pooled environment.
pool.get_validation_table_names_mc_destroy= Exception while destroying Managed Connection while getting validation table names, for pool : {0}
validation.constraints.violation=RAR8021: Following validation constraints violated for Java Bean of type [ {0} ] of resource-adapter [ {1} ] : Message = {2})
RAR8021.diag.cause.1=There could be erroneous values (not acceptable according to the constraints) specified in the bean
pool.get_invalid_connections_resourceexception= RAR8022: Failed to get invalid connections from Managed Connection Factory {0}. Exception = {1}; Message = {2}
RAR8022.diag.cause.1=Resource Adapter threw a ResourceException.
RAR8022.diag.check.1=Check the resource adapter's documentation.
poolmgr.flush_noop_pool_not_initialized=RAR8023: Flush Connection Pool did not happen as pool - {0} is not initialized
RAR8023.diag.cause.1=Flush Connection Pool is a NO-OP as the pool has not been initialized till now.
RAR8023.diag.check.1=Check if pool has been initialized
pool.get_validation_table_names_failure=RAR8024: Get Validation Table Names failed. Reason - {0}
RAR8024.diag.cause.1=Database server is not up and admin GUI tries to get connection validation table names
RAR8024.diag.check.1=Make sure database server is up and running.
pool.flush_pool_failure=RAR8025: Flush Connection Pool failed for pool - {0}. Reason - {1}
RAR8025.diag.cause.1=Database server is not up and Flush tries to access the pool.
RAR8025.diag.check.1=Make sure database server is up and running.
pool.datastructure.init.failure=RAR8026: Unable to initialize custom pool data-structure : {0}
pool.waitqueue.init.failure=RAR8027: Unable to initialize custom connection pool wait-queue : {0}
pool.resource.gateway.init.failure=RAR8028: Unable to initialize custom connection pool resource-gateway : {0}
core.resource_disabled=RAR8029: Resource [ {0} ] of type [ {1} ] is not enabled
pool.get_validation_table_names=RAR8030: Exception while getting validation table names. Set resource-adapter log-level to FINE for exception stack trace.
RAR8030.diag.cause.1=Database access error
RAR8030.diag.check.1=Check is database server is up and running
pool.exc_is_pingable=RAR8031: Exception while pinging tableName : {0}.
RAR8031.diag.cause.1=Database access error
RAR8031.diag.check.1=Check is database server is up and running
rardeployment.all_resources_removal_error=RAR8032: Failed to delete all connector resources : {0}
ccp_adm.null_pool_name=RAR8033: Deletion of pool failed. PoolName not specified.
RAR8033.diag.cause.1=PoolName specified could be null
error.reconfiguring.pool=RAR8034: Exception while reconfiguring pool [ {0} ] : , {1}
RAR8034.diag.cause.1=Unable to reconfigure connection pool.
RAR8034.diag.check.1=Review the new modifications to pool properties and attributes
error.creating.jdbc.pool=RAR8035: Exception while creating jdbc connection pool [ {0} ] : , {1}
RAR8035.diag.cause.1=unable to create jdbc connection pool
RAR8035.diag.check.1=check whether database is up and running, use ping-connection-pool to \
see connection parameters are valid
error.redeploying.jdbc.pool=RAR8036: Exception while redeploying jdbc-connection-pool [ {0} ], {1}
RAR8036.diag.cause.1=unable to redeploy jdbc connection pool
RAR8036.diag.check.1=check whether database is up and running, use ping-connection-pool to \
see connection parameters are valid, Review the new modifications to pool properties and attributes
error.retrieving.tx-support.from.rar=RAR8037: exception while getting transaction-support for RAR [ {0} ] , {1}
RAR8037.diag.cause.1=Unable to get connector descriptor
RAR8037.diag.check.1=check whether rar is property deployed, ra.xml or annotations equivalent are correct.
unable.to.load.ra=RAR8038: unable to load the resource-adapter [ {0} ], {1}
RAR8038.diag.cause.1=Possible exception while bootstrapping RAR or validating RAR
RAR8038.diag.check.1=Check server.log for exact cause of failure which may be due to one of the steps in \
bootstrapping or validating or starting RAR.
unable.to.unload.ra=RAR8039: unable to unload the resource-adapter [ {0} ], {1}
RAR8039.diag.cause.1=Possible exception while destroying pools
RAR8039.diag.cause.2=Possible exception while deactivating end-points
RAR8039.diag.cause.3=Possible exception while stopping RA
RAR8039.diag.check.1=Check server.log for exact cause of failure which may be due failure while destroying pools
RAR8039.diag.check.2=Check server.log for exact cause of failure which may be due failure in de-activating end-points
RAR8039.diag.check.3=Check server.log for exact cause of failure which may be due failure while stopping RA
unable.to.delete.rac=RAR8040: Unable to delete resource-adapter-config for RAR [ {0} ]
RAR8040.diag.cause.1=Possible exception while deleting resource-adapter-config
RAR8040.diag.check.1=Check server.log for exact cause of failure that happened while deleting resource-adapter-config
unable.to.delete.rac.exception=RAR8041: Unable to delete resource-adapter-config for RAR [ {0} ], {1}
RAR8041.diag.cause.1=Possible exception while deleting resource-adapter-config
RAR8041.diag.check.1=Check the exception message while deleting the configuration of resource-adapter-config
unable.to.delete.work.security.map=RAR8042: Unable to delete work-security-map(s) for RAR [ {0} ]
RAR8042.diag.cause.1=Possible exception while deleting work-security-map configuration
RAR8042.diag.check.1=Check server.log for exact cause of failure that happened while deleting work-security-map configuration
unable.to.delete.work.security.map.exception=RAR8043: Unable to delete work-security-map(s) for RAR [ {0} ], {1}
RAR8043.diag.cause.1=Possible exception while deleting work-security-map configuration
RAR8043.diag.check.1=Check the exception message while deleting the configuration of work-security-map
unable.to.delete.admin.object=RAR8044: Unable to admin-object-resource(s) for RAR [ {0} ]
RAR8044.diag.cause.1=Possible exception while deleting admin-object-resource configuration
RAR8044.diag.check.1=Check server.log for exact cause of failure that happened while deleting admin-object-resource configuration
unable.to.delete.admin.object.exception=RAR8045: Unable to delete admin-object-resource(s) for RAR [ {0} ], {1}
RAR8045.diag.cause.1=Possible exception while deleting admin-object-resource configuration
RAR8045.diag.check.1=Check the exception message while deleting the configuration of admin-object-resource
unable.to.delete.connector.resource=RAR8046: Unable to connector-resource(s) for RAR [ {0} ]
RAR8046.diag.cause.1=Possible exception while deleting connector-resource configuration
RAR8046.diag.check.1=Check server.log for exact cause of failure that happened while deleting connector-resource configuration
unable.to.delete.connector.resource.exception=RAR8047: Unable to delete connector-resource(s) for RAR [ {0} ], {1}
RAR8047.diag.cause.1=Possible exception while deleting connector-resource configuration
RAR8047.diag.check.1=Check the exception message while deleting the configuration of connector-resource
unable.to.delete.connector.connection.pool=RAR8048: Unable to delete connector-connection-pool(s) for RAR [ {0} ]
RAR8048.diag.cause.1=Possible exception while deleting connector-connection-pool configuration
RAR8048.diag.check.1=Check server.log for exact cause of failure that happened while deleting connector-connection-pool configuration
unable.to.delete.connector.connection.pool.exception=RAR8049: Unable to delete connector-connection-pool(s) for RAR [ {0} ], {1}
RAR8049.diag.cause.1=Possible exception while deleting connector-connection-pool configuration
RAR8049.diag.check.1=Check the exception message while deleting the configuration of connector-connection-pool
error.processing.xml.for.bean.validation.mapping=RAR8050: Exception while processing xml files for detecting bean-validation-mapping\
of RAR [ {0} ], using default validator, {1}
RAR8050.diag.cause.1=Possible invalid entries in mapping xml files
RAR8050.diag.check.1=Check whether all the constraints defined in the validation mapping xml files are valid
unable.to.stop.ra=RAR8051: unable to stop resource adapter [ {0} ] due to exception {1}, set FINEST log level\
to print complete exception in server.log
RAR8051.diag.cause.1=unable to destroy pools or stop RA or deactivating end-points
RAR8051.diag.check.1=Check server.log for exceptions due to failure in destroying pools or stopping RA or deactivating end-points
ra.stop.timeout=RAR8052: RA [ {0} ] stop timeout occured, {1}
RAR8052.diag.cause.1=unable to stop RA in specified time, timeout occurred
RAR8052.diag.check.1=Check whether ra.destroy() has happened successfully or any exceptions in server.log
ra.stop.failed=RAR8053: RA [ {0} ] stop failed, {1}
RAR8053.diag.cause.1=RA stop failed
RAR8053.diag.check.1=Check server.log for any exceptions
test.connection.pool.failed=RAR8054: Exception while creating an unpooled [test] connection for pool [ {0} ], {1}
RAR8054.diag.cause.1=Unable to create a new connection
RAR8054.diag.check.1=Check whether connection parameters are correct
error.getting.connector.descriptor=RAR8055: Exception while getting connector descriptor for RAR [ {0} ], {1}
RAR8055.diag.cause.1=Possible exception while parsing ra.xml or RA is not deployed
RAR8055.diag.check.1=Check whether RA name is correct, RA is already deployed, server.log for exceptions while parsing ra.xml
unable.to.load.connection.pool=RAR8056: unable to load Connection Pool [ {0} ], {1}
RAR8056.diag.cause.1=Exception while loading RAR or resource-adapter-config or connection pool
RAR8056.diag.check.1=Check the exception, server.log for status of RAR, resource-adapter-config, exceptions while loading connection pool
resources.of.rar.exist=RAR8057: one or more resources of resource-adapter [ {0} ] exist, use '--cascade=true' to delete them during undeploy
RAR8057.diag.cause.1=resources of RAR exist during RAR undeployment
RAR8057.diag.check.1=Check whether resources of RAR exist, delete them before RAR undeployment or use '--casecade=true' \
to delete them during RAR undeployment
unsupported.work.context=RAR8058: Unsupported work context [ {0} ] for RAR [ {1} ]
RAR8058.diag.cause.1=Required work context is not supported by the container
RAR8058.diag.check.1=Check the application server documentation for supported work context types in addition to\
standard work contexts like TransactionContext, SecurityContext, HintsContext
error.finding.properties=RAR8059: Exception while trying to find properties of class [ {0} ], set log-level to\
FINE for more information, {1}
RAR8059.diag.cause.1=Possible exception due to access permission or class is not available
RAR8059.diag.check.1=Check whether the class is available to the server, appropriate permissions are provided to load the class
unable.to.lookup.pool=RAR8060: Unable to lookup pool [ {0} ], {1}
RAR8060.diag.cause.1=Possible exception during pool initialization
RAR8060.diag.check.1=Check any exceptions in server.log related to pool creation
failed.to.load.deferred.ra=RAR8061: failed to load resource-adapter-config or RA [ {0} ], {1}
RAR8061.diag.cause.1=Unable to load RA or resource-adapter-config
RAR8061.diag.check.1=Possible failure to load RA or resource-adapter-config. Check server.log for exceptions
failed.to.load.deferred.resources=RAR8062: failed to load resources for RA[ {0} ], {1}
RAR8062.diag.cause.1=Unable to load resources
RAR8062.diag.check.1=Possible failure to load resources. Check server.log for exceptions
flush_when_pooling_disabled=RAR8065: Attempt to Flush Connection Pool failed because Pooling is disabled for pool : {0}
RAR8065.diag.cause.1=Pooling is disabled when flush connection pool is attempted.
RAR8065.diag.check.1=Flush connection pool is useful only in a pooled environment.
cleanup.resource.failed=RAR8066: Cleanup of a resource from pool [ {0} ] failed. Exception : {1}
RAR8066.diag.cause.1=resource-adapter might have thrown exception due to clean up failure
RAR8066.diag.check.1=check logs specific to resource-adapter in the server.log for more information.
unable_to_determine_pool_type=RAR8067: Unable to determine pool type for pool [ {0} ], using default pool type
RAR8067.diag.cause.1=Unable to determine type of pool (Default, Associated-with-thread, etc.)
RAR8067.diag.check.1=Message can be ignored as the processing can continue using the default pool type. \
Else check pool settings and any related messages in the server.log for more information.
core.resourcedeploy_error=Error in resource deploy.
pool.datastructure.rwlockds.init=initializing reentrant ds
using.default.ds=RAR8068: Using default datasource : {0} for pool : {1}
RAR8068.diag.cause.1=Datasource/Driver Class not found
RAR8068.diag.cause.2=Resource type does not match with actually loaded class type.
gf.resources.module.scope.deployment.failure=RAR8069: Failed to create resources (defined in glassfish-resources.xml) bundled in module [ {0} ], of application [ {1} ] : [ {2} ]
RAR8069.diag.cause.1=Invalid resource definition
RAR8069.diag.check.1=Check whether attributes and properties of resource-definitions conform to the constraints
gf.resources.app.scope.deployment.failure=RAR8070: Failed to create resources (defined in glassfish-resources.xml) bundled in application [ {0} ] : [ {1} ]
RAR8070.diag.cause.1=Invalid resource definition
RAR8070.diag.check.1=Check whether attributes and properties of resource-definitions conform to the constraints
exception.redeploying.pool.transparently=RAR8071: Exception while transparently redeploying pool [ {0} ] : {1}
RAR8071.diag.cause.1=Unexpected exception while redeploying the pool transparently.
RAR8071.diag.check.1=Check the exception message in server.log and verify pool configuration.
datasource.xadatasource_nulluser_error=Username is null while loading the XA connection pool
datasource.xadatasource_nullpassword_error=Password is null while loading the XA connection pool
rardeployment.resource_jndi_bind_failure=RAR8072 : Failed to publish resource {0} in JNDI : {1}
RAR8072.diag.check.1=Check whether the connection pool exists.
RAR8072.diag.check.2=Check whether the connection pool configuration is valid.
RAR8072.diag.check.3=Check whether the resource configuration is valid.
dsd.registration.failed=RAR8073 : Failed to deploy DataSource Definition [ {0} ] of application [ {1} ], exception : {2}
RAR8073.diag.check.1=Check the server.log for exceptions.
#------------------------------------------------------------------------------------------------------
#RAR8010 till RAR8500 reserved for connectors-runtime LogStrings.
#Please increment RAR IDs by one for any new additional messages added here.
#Add any new properties above these comments.
#------------------------------------------------------------------------------------------------------
#------------------------------------------------------------------------------------------------------
#RAR8010 till RAR8500 reserved for connectors-runtime LogStrings.
#RAR8501 till RAR8700 reserved for connectors-inbound-runtime LogStrings.
#RAR8701 till RAR8850 reserved for connectors-internal-api LogStrings.
#RAR8850 till RAR8999 reserved for work-management LogStrings.
#RAR9000 till RAR9500 reserved for jdbc-ra LogStrings.
#------------------------------------------------------------------------------------------------------
Other Glassfish examples (source code examples)Here is a short list of links related to this Glassfish LogStrings.properties source code file: |
The search page
Other Glassfish source code examples at this package level
Click here to learn more about this project
