Glassfish example source code file (connector_1_5.xsd)
The Glassfish connector_1_5.xsd source code<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://java.sun.com/xml/ns/j2ee"
xmlns:j2ee="http://java.sun.com/xml/ns/j2ee"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
version="1.5">
<xsd:annotation>
<xsd:documentation>
@(#)connector_1_5.xsds 1.27 06/17/03
</xsd:documentation>
</xsd:annotation>
<xsd:annotation>
<xsd:documentation>
DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
Copyright 2003-2007 Sun Microsystems, Inc. All rights reserved.
The contents of this file are subject to the terms of either the
GNU General Public License Version 2 only ("GPL") or the Common
Development and Distribution License("CDDL") (collectively, the
"License"). You may not use this file except in compliance with
the License. You can obtain a copy of the License at
https://glassfish.dev.java.net/public/CDDL+GPL.html or
glassfish/bootstrap/legal/LICENSE.txt. See the License for the
specific language governing permissions and limitations under the
License.
When distributing the software, include this License Header
Notice in each file and include the License file at
glassfish/bootstrap/legal/LICENSE.txt. Sun designates this
particular file as subject to the "Classpath" exception as
provided by Sun in the GPL Version 2 section of the License file
that accompanied this code. If applicable, add the following
below the License Header, with the fields enclosed by brackets []
replaced by your own identifying information:
"Portions Copyrighted [year] [name of copyright owner]"
Contributor(s):
If you wish your version of this file to be governed by only the
CDDL or only the GPL Version 2, indicate your decision by adding
"[Contributor] elects to include this software in this
distribution under the [CDDL or GPL Version 2] license." If you
don't indicate a single choice of license, a recipient has the
option to distribute your version of this file under either the
CDDL, the GPL Version 2 or to extend the choice of license to its
licensees as provided above. However, if you add GPL Version 2
code and therefore, elected the GPL Version 2 license, then the
option applies only if the new code is made subject to such
option by the copyright holder.
</xsd:documentation>
</xsd:annotation>
<xsd:annotation>
<xsd:documentation>
<![CDATA[
This is the XML Schema for the Connector 1.5 deployment
descriptor. The deployment descriptor must be named
"META-INF/ra.xml" in the connector's rar file. All Connector
deployment descriptors must indicate the connector resource
adapter schema by using the J2EE namespace:
http://java.sun.com/xml/ns/j2ee
and by indicating the version of the schema by
using the version element as shown below:
<connector xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/connector_1_5.xsd"
version="1.5">
...
</connector>
The instance documents may indicate the published version of
the schema using the xsi:schemaLocation attribute for J2EE
namespace with the following location:
http://java.sun.com/xml/ns/j2ee/connector_1_5.xsd
]]>
</xsd:documentation>
</xsd:annotation>
<xsd:annotation>
<xsd:documentation>
The following conventions apply to all J2EE
deployment descriptor elements unless indicated otherwise.
- In elements that specify a pathname to a file within the
same JAR file, relative filenames (i.e., those not
starting with "/") are considered relative to the root of
the JAR file's namespace. Absolute filenames (i.e., those
starting with "/") also specify names in the root of the
JAR file's namespace. In general, relative names are
preferred. The exception is .war files where absolute
names are preferred for consistency with the Servlet API.
</xsd:documentation>
</xsd:annotation>
<xsd:include schemaLocation="j2ee_1_4.xsd"/>
<!-- **************************************************** -->
<xsd:element name="connector" type="j2ee:connectorType">
<xsd:annotation>
<xsd:documentation>
The connector element is the root element of the deployment
descriptor for the resource adapter. This element includes
general information - vendor name, resource adapter version,
icon - about the resource adapter module. It also includes
information specific to the implementation of the resource
adapter library as specified through the element
resourceadapter.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<!-- **************************************************** -->
<xsd:complexType name="activationspecType">
<xsd:annotation>
<xsd:documentation>
The activationspecType specifies an activation
specification. The information includes fully qualified
Java class name of an activation specification and a set of
required configuration property names.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="activationspec-class"
type="j2ee:fully-qualified-classType">
<xsd:annotation>
<xsd:documentation>
<![CDATA[
The element activationspec-class specifies the fully
qualified Java class name of the activation
specification class. This class must implement the
javax.resource.spi.ActivationSpec interface. The
implementation of this class is required to be a
JavaBean.
Example:
<activationspec-class>com.wombat.ActivationSpecImpl
</activationspec-class>
]]>
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="required-config-property"
type="j2ee:required-config-propertyType"
minOccurs="0"
maxOccurs="unbounded"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="adminobjectType">
<xsd:annotation>
<xsd:documentation>
The adminobjectType specifies information about an
administered object. Administered objects are specific to a
messaging style or message provider. This contains
information on the Java type of the interface implemented by
an administered object, its Java class name and its
configuration properties.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="adminobject-interface"
type="j2ee:fully-qualified-classType">
<xsd:annotation>
<xsd:documentation>
<![CDATA[
The element adminobject-interface specifies the
fully qualified name of the Java type of the
interface implemented by an administered object.
Example:
<adminobject-interface>javax.jms.Destination
</adminobject-interface>
]]>
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="adminobject-class"
type="j2ee:fully-qualified-classType">
<xsd:annotation>
<xsd:documentation>
<![CDATA[
The element adminobject-class specifies the fully
qualified Java class name of an administered object.
Example:
<adminobject-class>com.wombat.DestinationImpl
</adminobject-class>
]]>
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="config-property"
type="j2ee:config-propertyType"
minOccurs="0"
maxOccurs="unbounded"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="authentication-mechanismType">
<xsd:annotation>
<xsd:documentation>
The authentication-mechanismType specifies an authentication
mechanism supported by the resource adapter. Note that this
support is for the resource adapter and not for the
underlying EIS instance. The optional description specifies
any resource adapter specific requirement for the support of
security contract and authentication mechanism.
Note that BasicPassword mechanism type should support the
javax.resource.spi.security.PasswordCredential interface.
The Kerbv5 mechanism type should support the
org.ietf.jgss.GSSCredential interface or the deprecated
javax.resource.spi.security.GenericCredential interface.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="description"
type="j2ee:descriptionType"
minOccurs="0"
maxOccurs="unbounded"/>
<xsd:element name="authentication-mechanism-type"
type="j2ee:xsdStringType">
<xsd:annotation>
<xsd:documentation>
<![CDATA[
The element authentication-mechanism-type specifies
type of an authentication mechanism.
The example values are:
<authentication-mechanism-type>BasicPassword
</authentication-mechanism-type>
<authentication-mechanism-type>Kerbv5
</authentication-mechanism-type>
Any additional security mechanisms are outside the
scope of the Connector architecture specification.
]]>
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="credential-interface"
type="j2ee:credential-interfaceType"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="config-property-nameType">
<xsd:annotation>
<xsd:documentation>
<![CDATA[
The config-property-nameType contains the name of a
configuration property.
The connector architecture defines a set of well-defined
properties all of type java.lang.String. These are as
follows.
ServerName
PortNumber
UserName
Password
ConnectionURL
A resource adapter provider can extend this property set to
include properties specific to the resource adapter and its
underlying EIS.
Possible values include
ServerName
PortNumber
UserName
Password
ConnectionURL
Example: <config-property-name>ServerName
]]>
</xsd:documentation>
</xsd:annotation>
<xsd:simpleContent>
<xsd:restriction base="j2ee:xsdStringType"/>
</xsd:simpleContent>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="config-property-typeType">
<xsd:annotation>
<xsd:documentation>
<![CDATA[
The config-property-typeType contains the fully
qualified Java type of a configuration property.
The following are the legal values:
java.lang.Boolean, java.lang.String, java.lang.Integer,
java.lang.Double, java.lang.Byte, java.lang.Short,
java.lang.Long, java.lang.Float, java.lang.Character
Used in: config-property
Example:
<config-property-type>java.lang.String
]]>
</xsd:documentation>
</xsd:annotation>
<xsd:simpleContent>
<xsd:restriction base="j2ee:string">
<xsd:enumeration value="java.lang.Boolean"/>
<xsd:enumeration value="java.lang.String"/>
<xsd:enumeration value="java.lang.Integer"/>
<xsd:enumeration value="java.lang.Double"/>
<xsd:enumeration value="java.lang.Byte"/>
<xsd:enumeration value="java.lang.Short"/>
<xsd:enumeration value="java.lang.Long"/>
<xsd:enumeration value="java.lang.Float"/>
<xsd:enumeration value="java.lang.Character"/>
</xsd:restriction>
</xsd:simpleContent>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="config-propertyType">
<xsd:annotation>
<xsd:documentation>
The config-propertyType contains a declaration of a single
configuration property that may be used for providing
configuration information.
The declaration consists of an optional description, name,
type and an optional value of the configuration property. If
the resource adapter provider does not specify a value than
the deployer is responsible for providing a valid value for
a configuration property.
Any bounds or well-defined values of properties should be
described in the description element.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="description"
type="j2ee:descriptionType"
minOccurs="0"
maxOccurs="unbounded"/>
<xsd:element name="config-property-name"
type="j2ee:config-property-nameType"/>
<xsd:element name="config-property-type"
type="j2ee:config-property-typeType"/>
<xsd:element name="config-property-value"
type="j2ee:xsdStringType"
minOccurs="0">
<xsd:annotation>
<xsd:documentation>
<![CDATA[
The element config-property-value contains the value
of a configuration entry. Note, it is possible for a
resource adapter deployer to override this
configuration information during deployment.
Example:
<config-property-value>WombatServer
]]>
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="connection-definitionType">
<xsd:annotation>
<xsd:documentation>
The connection-definitionType defines a set of connection
interfaces and classes pertaining to a particular connection
type. This also includes configurable properties for
ManagedConnectionFactory instances that may be produced out
of this set.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="managedconnectionfactory-class"
type="j2ee:fully-qualified-classType">
<xsd:annotation>
<xsd:documentation>
<![CDATA[
The element managedconnectionfactory-class specifies
the fully qualified name of the Java class that
implements the
javax.resource.spi.ManagedConnectionFactory interface.
This Java class is provided as part of resource
adapter's implementation of connector architecture
specified contracts. The implementation of this
class is required to be a JavaBean.
Example:
<managedconnectionfactory-class>
com.wombat.ManagedConnectionFactoryImpl
</managedconnectionfactory-class>
]]>
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="config-property"
type="j2ee:config-propertyType"
minOccurs="0"
maxOccurs="unbounded"/>
<xsd:element name="connectionfactory-interface"
type="j2ee:fully-qualified-classType">
<xsd:annotation>
<xsd:documentation>
<![CDATA[
The element connectionfactory-interface specifies
the fully qualified name of the ConnectionFactory
interface supported by the resource adapter.
Example:
<connectionfactory-interface>com.wombat.ConnectionFactory
</connectionfactory-interface>
OR
<connectionfactory-interface>javax.resource.cci.ConnectionFactory
</connectionfactory-interface>
]]>
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="connectionfactory-impl-class"
type="j2ee:fully-qualified-classType">
<xsd:annotation>
<xsd:documentation>
<![CDATA[
The element connectionfactory-impl-class specifies
the fully qualified name of the ConnectionFactory
class that implements resource adapter
specific ConnectionFactory interface.
Example:
<connectionfactory-impl-class>com.wombat.ConnectionFactoryImpl
</connectionfactory-impl-class>
]]>
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="connection-interface"
type="j2ee:fully-qualified-classType">
<xsd:annotation>
<xsd:documentation>
<![CDATA[
The connection-interface element specifies the fully
qualified name of the Connection interface supported
by the resource adapter.
Example:
<connection-interface>javax.resource.cci.Connection
</connection-interface>
]]>
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="connection-impl-class"
type="j2ee:fully-qualified-classType">
<xsd:annotation>
<xsd:documentation>
<![CDATA[
The connection-impl-classType specifies the fully
qualified name of the Connection class that
implements resource adapter specific Connection
interface. It is used by the connection-impl-class
elements.
Example:
<connection-impl-class>com.wombat.ConnectionImpl
</connection-impl-class>
]]>
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="connectorType">
<xsd:annotation>
<xsd:documentation>
The connectorType defines a resource adapter.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:group ref="j2ee:descriptionGroup"/>
<xsd:element name="vendor-name"
type="j2ee:xsdStringType">
<xsd:annotation>
<xsd:documentation>
The element vendor-name specifies the name of
resource adapter provider vendor.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="eis-type"
type="j2ee:xsdStringType">
<xsd:annotation>
<xsd:documentation>
The element eis-type contains information about the
type of the EIS. For example, the type of an EIS can
be product name of EIS independent of any version
info.
This helps in identifying EIS instances that can be
used with this resource adapter.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="resourceadapter-version"
type="j2ee:xsdStringType">
<xsd:annotation>
<xsd:documentation>
The element resourceadapter-version specifies a string-based version
of the resource adapter from the resource adapter
provider.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="license"
type="j2ee:licenseType"
minOccurs="0"/>
<xsd:element name="resourceadapter"
type="j2ee:resourceadapterType"/>
</xsd:sequence>
<xsd:attribute name="version"
type="j2ee:dewey-versionType"
fixed="1.5"
use="required">
<xsd:annotation>
<xsd:documentation>
The version specifies the version of the
connector architecture specification that is
supported by this resource adapter. This information
enables deployer to configure the resource adapter to
support deployment and runtime requirements of the
corresponding connector architecture specification.
</xsd:documentation>
</xsd:annotation>
</xsd:attribute>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="credential-interfaceType">
<xsd:annotation>
<xsd:documentation>
The credential-interfaceType specifies the
interface that the resource adapter implementation
supports for the representation of the
credentials. This element(s) that use this type,
i.e. credential-interface, should be used by
application server to find out the Credential
interface it should use as part of the security
contract.
The possible values are:
javax.resource.spi.security.PasswordCredential
org.ietf.jgss.GSSCredential
javax.resource.spi.security.GenericCredential
</xsd:documentation>
</xsd:annotation>
<xsd:simpleContent>
<xsd:restriction base="j2ee:fully-qualified-classType">
<xsd:enumeration
value="javax.resource.spi.security.PasswordCredential"/>
<xsd:enumeration
value="org.ietf.jgss.GSSCredential"/>
<xsd:enumeration
value="javax.resource.spi.security.GenericCredential"/>
</xsd:restriction>
</xsd:simpleContent>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="inbound-resourceadapterType">
<xsd:annotation>
<xsd:documentation>
The inbound-resourceadapterType specifies information
about an inbound resource adapter. This contains information
specific to the implementation of the resource adapter
library as specified through the messageadapter element.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="messageadapter"
type="j2ee:messageadapterType"
minOccurs="0">
<xsd:unique name="messagelistener-type-uniqueness">
<xsd:annotation>
<xsd:documentation>
The messagelistener-type element content must be
unique in the messageadapter. Several messagelisteners
can not use the same messagelistener-type.
</xsd:documentation>
</xsd:annotation>
<xsd:selector xpath="j2ee:messagelistener"/>
<xsd:field xpath="j2ee:messagelistener-type"/>
</xsd:unique>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="licenseType">
<xsd:annotation>
<xsd:documentation>
The licenseType specifies licensing requirements for the
resource adapter module. This type specifies whether a
license is required to deploy and use this resource adapter,
and an optional description of the licensing terms
(examples: duration of license, number of connection
restrictions). It is used by the license element.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="description"
type="j2ee:descriptionType"
minOccurs="0"
maxOccurs="unbounded"/>
<xsd:element name="license-required"
type="j2ee:true-falseType">
<xsd:annotation>
<xsd:documentation>
The element license-required specifies whether a
license is required to deploy and use the
resource adapter. This element must be one of
the following, "true" or "false".
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="messageadapterType">
<xsd:annotation>
<xsd:documentation>
The messageadapterType specifies information about the
messaging capabilities of the resource adapter. This
contains information specific to the implementation of the
resource adapter library as specified through the
messagelistener element.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="messagelistener"
type="j2ee:messagelistenerType"
maxOccurs="unbounded"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="messagelistenerType">
<xsd:annotation>
<xsd:documentation>
The messagelistenerType specifies information about a
specific message listener supported by the messaging
resource adapter. It contains information on the Java type
of the message listener interface and an activation
specification.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="messagelistener-type"
type="j2ee:fully-qualified-classType">
<xsd:annotation>
<xsd:documentation>
<![CDATA[
The element messagelistener-type specifies the fully
qualified name of the Java type of a message
listener interface.
Example:
<messagelistener-type>javax.jms.MessageListener
</messagelistener-type>
]]>
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="activationspec"
type="j2ee:activationspecType"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="outbound-resourceadapterType">
<xsd:annotation>
<xsd:documentation>
The outbound-resourceadapterType specifies information about
an outbound resource adapter. The information includes fully
qualified names of classes/interfaces required as part of
the connector architecture specified contracts for
connection management, level of transaction support
provided, one or more authentication mechanisms supported
and additional required security permissions.
If there is no authentication-mechanism specified as part of
resource adapter element then the resource adapter does not
support any standard security authentication mechanisms as
part of security contract. The application server ignores
the security part of the system contracts in this case.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="connection-definition"
type="j2ee:connection-definitionType"
maxOccurs="unbounded"/>
<xsd:element name="transaction-support"
type="j2ee:transaction-supportType"/>
<xsd:element name="authentication-mechanism"
type="j2ee:authentication-mechanismType"
minOccurs="0"
maxOccurs="unbounded"/>
<xsd:element name="reauthentication-support"
type="j2ee:true-falseType">
<xsd:annotation>
<xsd:documentation>
The element reauthentication-support specifies
whether the resource adapter implementation supports
re-authentication of existing Managed- Connection
instance. Note that this information is for the
resource adapter implementation and not for the
underlying EIS instance. This element must have
either a "true" or "false" value.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="required-config-propertyType">
<xsd:annotation>
<xsd:documentation>
<![CDATA[
The required-config-propertyType contains a declaration
of a single configuration property used for specifying a
required configuration property name. It is used
by required-config-property elements.
Example:
<required-config-property>Destination
]]>
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="description"
type="j2ee:descriptionType"
minOccurs="0"
maxOccurs="unbounded"/>
<xsd:element name="config-property-name"
type="j2ee:config-property-nameType"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="resourceadapterType">
<xsd:annotation>
<xsd:documentation>
The resourceadapterType specifies information about the
resource adapter. The information includes fully qualified
resource adapter Java class name, configuration properties,
information specific to the implementation of the resource
adapter library as specified through the
outbound-resourceadapter and inbound-resourceadapter
elements, and an optional set of administered objects.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="resourceadapter-class"
type="j2ee:fully-qualified-classType"
minOccurs="0">
<xsd:annotation>
<xsd:documentation>
The element resourceadapter-class specifies the
fully qualified name of a Java class that implements
the javax.resource.spi.ResourceAdapter
interface. This Java class is provided as part of
resource adapter's implementation of connector
architecture specified contracts. The implementation
of this class is required to be a JavaBean.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="config-property"
type="j2ee:config-propertyType"
minOccurs="0"
maxOccurs="unbounded"/>
<xsd:element name="outbound-resourceadapter"
type="j2ee:outbound-resourceadapterType"
minOccurs="0">
<xsd:unique name="connectionfactory-interface-uniqueness">
<xsd:annotation>
<xsd:documentation>
The connectionfactory-interface element content
must be unique in the outbound-resourceadapter.
Multiple connection-definitions can not use the
same connectionfactory-type.
</xsd:documentation>
</xsd:annotation>
<xsd:selector xpath="j2ee:connection-definition"/>
<xsd:field xpath="j2ee:connectionfactory-interface"/>
</xsd:unique>
</xsd:element>
<xsd:element name="inbound-resourceadapter"
type="j2ee:inbound-resourceadapterType"
minOccurs="0"/>
<xsd:element name="adminobject"
type="j2ee:adminobjectType"
minOccurs="0"
maxOccurs="unbounded"/>
<xsd:element name="security-permission"
type="j2ee:security-permissionType"
minOccurs="0"
maxOccurs="unbounded"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="security-permissionType">
<xsd:annotation>
<xsd:documentation>
The security-permissionType specifies a security
permission that is required by the resource adapter code.
The security permission listed in the deployment descriptor
are ones that are different from those required by the
default permission set as specified in the connector
specification. The optional description can mention specific
reason that resource adapter requires a given security
permission.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="description"
type="j2ee:descriptionType"
minOccurs="0"
maxOccurs="unbounded"/>
<xsd:element name="security-permission-spec"
type="j2ee:xsdStringType">
<xsd:annotation>
<xsd:documentation>
The element security-permission-spec specifies a security
permission based on the Security policy file
syntax. Refer to the following URL for Sun's
implementation of the security permission
specification:
http://java.sun.com/products/jdk/1.4/docs/guide/security/PolicyFiles.html#FileSyntax
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="transaction-supportType">
<xsd:annotation>
<xsd:documentation>
The transaction-supportType specifies the level of
transaction support provided by the resource adapter. It is
used by transaction-support elements.
The value must be one of the following:
NoTransaction
LocalTransaction
XATransaction
</xsd:documentation>
</xsd:annotation>
<xsd:simpleContent>
<xsd:restriction base="j2ee:string">
<xsd:enumeration value="NoTransaction"/>
<xsd:enumeration value="LocalTransaction"/>
<xsd:enumeration value="XATransaction"/>
</xsd:restriction>
</xsd:simpleContent>
</xsd:complexType>
</xsd:schema>
Other Glassfish examples (source code examples)Here is a short list of links related to this Glassfish connector_1_5.xsd source code file: |
The search page
Other Glassfish source code examples at this package level
Click here to learn more about this project
