CARDCTL

NAME
SYNOPSIS
DESCRIPTION
COMMANDS
OPTIONS
AUTHOR
SEE ALSO

NAME

cardctl − PCMCIA card control utility

SYNOPSIS

cardctl [-V] command [socket]
cardctl
[−c config] [−f scheme] [−s stab] scheme [name]

DESCRIPTION

Cardctl is used to monitor and control the state of PCMCIA sockets. If a socket number is specified, the command will be applied to just one socket; otherwise, all sockets will be affected.

Cardctl is also used to select between multiple PCMCIA configuration schemes. The current scheme name is passed to the device option scripts as part of the ‘‘device address’’, so the scripts can use it to choose between different setups.

If cardctl is executed by root, all commands are available. If it is executed by an unpriviledged user, only the informational commands are accessible.

Some commands may not work or give misleading results if cardmgr is not running.

COMMANDS

status

Display the current socket status flags.

config

Display the socket configuration, including power settings, interrupt and I/O window settings, and configuration registers.

ident

Display card identification information, including product identification strings, manufacturer ID codes, and function ID codes.

suspend

Shut down and then disable power for a socket.

resume

Restore power to a socket, and re-configure for use.

reset

Send a reset signal to a socket, subject to approval by any drivers already bound to the socket.

eject

Notify all client drivers that this card will be ejected, then cut power to the socket.

insert

Notify all client drivers that this card has just been inserted.

scheme

If no scheme name is given, cardctl will display the current PCMCIA configuration scheme. If a scheme name is given, cardctl will unconfigure all PCMCIA devices, and reconfigure for the new scheme.

OPTIONS

−V

Show version information and exit.

−c config

Look for the card configuration database and card configuration scripts in the specified directory, instead of /etc/pcmcia.

−f scheme

Use the specified file to keep track of the current configuration scheme, instead of /var/lib/pcmcia/scheme.

−s stab

Read current socket information from the specified file, instead of /var/lib/pcmcia/stab.

AUTHOR

David Hinds − dahinds@users.sourceforge.net

SEE ALSO

cardmgr(8).