home | career | drupal | java | mac | mysql | perl | scala | uml | unix

JMeter example source code file (messages.properties)

This example JMeter source code file (messages.properties) is included in the DevDaily.com "Java Source Code Warehouse" project. The intent of this project is to help you "Learn Java by Example" TM.

Java - JMeter tags/keywords

assertion, controller, controller, data, data, message, name, request, request, response, results, sampler, sampler, test

The JMeter messages.properties source code

#   Licensed to the Apache Software Foundation (ASF) under one or more
#   contributor license agreements.  See the NOTICE file distributed with
#   this work for additional information regarding copyright ownership.
#   The ASF licenses this file to You under the Apache License, Version 2.0
#   (the "License"); you may not use this file except in compliance with
#   the License.  You may obtain a copy of the License at
# 
#       http://www.apache.org/licenses/LICENSE-2.0
# 
#   Unless required by applicable law or agreed to in writing, software
#   distributed under the License is distributed on an "AS IS" BASIS,
#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#   See the License for the specific language governing permissions and
#   limitations under the License.

# Warning: JMeterUtils.getResString() replaces space with '_'
# and converts keys to lowercase before lookup
# => All keys in this file must also be lower case or they won't match
#

# Please add new entries in alphabetical order

about=About Apache JMeter
add=Add
add_as_child=Add as Child
add_parameter=Add Variable
add_pattern=Add Pattern\:
add_test=Add Test
add_user=Add User
add_value=Add Value
addtest=Add test
aggregate_graph=Statistical Graphs
aggregate_graph_column=Column
aggregate_graph_display=Display Graph
aggregate_graph_height=Height
aggregate_graph_max_length_xaxis_label=Max length of x-axis label
aggregate_graph_ms=Milliseconds
aggregate_graph_response_time=Response Time
aggregate_graph_save=Save Graph
aggregate_graph_save_table=Save Table Data
aggregate_graph_save_table_header=Save Table Header
aggregate_graph_title=Aggregate Graph
aggregate_graph_use_group_name=Include group name in label?
aggregate_graph_user_title=Title for Graph
aggregate_graph_width=Width
aggregate_report=Aggregate Report
aggregate_report_90=90%
aggregate_report_90%_line=90% Line
aggregate_report_bandwidth=KB/sec
aggregate_report_count=# Samples
aggregate_report_error=Error
aggregate_report_error%=Error %
aggregate_report_max=Max
aggregate_report_median=Median
aggregate_report_min=Min
aggregate_report_rate=Throughput
aggregate_report_stddev=Std. Dev.
aggregate_report_total_label=TOTAL
ajp_sampler_title=AJP/1.3 Sampler
als_message=Note\: The Access Log Parser is generic in design and allows you to plugin
als_message2=your own parser. To do so, implement the LogParser, add the jar to the
als_message3=/lib directory and enter the class in the sampler.
analyze=Analyze Data File...
anchor_modifier_title=HTML Link Parser
appearance=Look and Feel
argument_must_not_be_negative=The Argument must not be negative\!
assertion_assume_success=Ignore Status
assertion_code_resp=Response Code
assertion_contains=Contains
assertion_equals=Equals
assertion_headers=Response Headers
assertion_matches=Matches
assertion_message_resp=Response Message
assertion_not=Not
assertion_pattern_match_rules=Pattern Matching Rules
assertion_patterns_to_test=Patterns to Test
assertion_resp_field=Response Field to Test
assertion_substring=Substring
assertion_text_resp=Text Response
assertion_textarea_label=Assertions\:
assertion_title=Response Assertion
assertion_url_samp=URL Sampled
assertion_visualizer_title=Assertion Results
attribute=Attribute
attrs=Attributes
auth_base_url=Base URL
auth_manager_title=HTTP Authorization Manager
auths_stored=Authorizations Stored in the Authorization Manager
average=Average
average_bytes=Avg. Bytes
bind=Thread Bind
browse=Browse...
bouncy_castle_unavailable_message=The jars for bouncy castle are unavailable, please add them to your classpath.
bsf_sampler_title=BSF Sampler
bsf_script=Script to run (variables: log, Label, FileName, Parameters, args[], SampleResult (aka prev), sampler, ctx, vars, props, OUT)
bsf_script_file=Script file to run
bsf_script_language=Scripting language\:
bsf_script_parameters=Parameters to pass to script/file\:
bsh_assertion_script=Script (see below for variables that are defined)
bsh_assertion_script_variables=The following variables are defined for the script:\nRead/Write: Failure, FailureMessage, SampleResult, vars, props, log.\nReadOnly: Response[Data|Code|Message|Headers], RequestHeaders, SampleLabel, SamplerData, ctx
bsh_assertion_title=BeanShell Assertion
bsh_function_expression=Expression to evaluate
bsh_sampler_title=BeanShell Sampler
bsh_script=Script (see below for variables that are defined)
bsh_script_file=Script file
bsh_script_parameters=Parameters (-> String Parameters and String []bsh.args)
bsh_script_reset_interpreter=Reset bsh.Interpreter before each call
bsh_script_variables=The following variables are defined for the script\:\nSampleResult, ResponseCode, ResponseMessage, IsSuccess, Label, FileName, ctx, vars, props, log
busy_testing=I'm busy testing, please stop the test before changing settings
cache_manager_title=HTTP Cache Manager
cache_session_id=Cache Session Id?
cancel=Cancel
cancel_exit_to_save=There are test items that have not been saved.  Do you wish to save before exiting?
cancel_new_to_save=There are test items that have not been saved.  Do you wish to save before clearing the test plan?
cancel_revert_project=There are test items that have not been saved.  Do you wish to revert to the previously saved test plan?
char_value=Unicode character number (decimal or 0xhex)
choose_function=Choose a function
choose_language=Choose Language
clear=Clear
clear_all=Clear All
clear_cache_per_iter=Clear cache each iteration?
clear_cookies_per_iter=Clear cookies each iteration?
column_delete_disallowed=Deleting this column is not permitted
column_number=Column number of CSV file | next | *alias
compare=Compare
comparefilt=Compare filter
comparison_differ_content=Responses differ in content
comparison_differ_time=Responses differ in response time by more than 
comparison_invalid_node=Invalid Node 
comparison_regex_string=Regex String
comparison_regex_substitution=Substitution
comparison_response_time=Response Time: 
comparison_unit=\ ms
comparison_visualizer_title=Comparison Assertion Visualizer
config_element=Config Element
config_save_settings=Configure
configure_wsdl=Configure
constant_throughput_timer_memo=Add a delay between sampling to attain constant throughput
constant_timer_delay=Thread Delay (in milliseconds)\:
constant_timer_memo=Add a constant delay between sampling
constant_timer_title=Constant Timer
content_encoding=Content encoding\:
controller=Controller
cookie_manager_policy=Cookie Policy
cookie_manager_title=HTTP Cookie Manager
cookies_stored=User-Defined Cookies
copy=Copy
corba_config_title=CORBA Sampler Config
corba_input_data_file=Input Data File\:
corba_methods=Choose method to invoke\:
corba_name_server=Name Server\:
corba_port=Port Number\:
corba_request_data=Input Data
corba_sample_title=CORBA Sampler
counter_config_title=Counter
counter_per_user=Track counter independently for each user
countlim=Size limit
csvread_file_file_name=CSV file to get values from | *alias
cut=Cut
cut_paste_function=Copy and paste function string
database_conn_pool_max_usage=Max Usage For Each Connection\:
database_conn_pool_props=Database Connection Pool
database_conn_pool_size=Number of Connections in Pool\:
database_conn_pool_title=JDBC Database Connection Pool Defaults
database_driver_class=Driver Class\:
database_login_title=JDBC Database Login Defaults
database_sql_query_string=SQL Query String\:
database_sql_query_title=JDBC SQL Query Defaults
database_testing_title=JDBC Request
database_url=JDBC URL\:
database_url_jdbc_props=Database URL and JDBC Driver
ddn=DN
de=German
debug_off=Disable debug
debug_on=Enable debug
default_parameters=Default Parameters
default_value_field=Default Value\:
delay=Startup delay (seconds)
delete=Delete
delete_parameter=Delete Variable
delete_test=Delete Test
delete_user=Delete User
deltest=Deletion test
deref=Dereference aliases
disable=Disable
distribution_graph_title=Distribution Graph (alpha)
distribution_note1=The graph will update every 10 samples
dn=DN
domain=Domain
done=Done
duration=Duration (seconds)
duration_assertion_duration_test=Duration to Assert
duration_assertion_failure=The operation lasted too long\: It took {0} milliseconds, but should not have lasted longer than {1} milliseconds.
duration_assertion_input_error=Please enter a valid positive integer.
duration_assertion_label=Duration in milliseconds\:
duration_assertion_title=Duration Assertion
edit=Edit
email_results_title=Email Results
en=English
enable=Enable
encode?=Encode?
encoded_value=URL Encoded Value
endtime=End Time  
entry_dn=Entry DN
entrydn=Entry DN
error_loading_help=Error loading help page
error_occurred=Error Occurred
error_title=Error
es=Spanish
escape_html_string=String to escape
eval_name_param=Text containing variable and function references
evalvar_name_param=Name of variable
example_data=Sample Data
example_title=Example Sampler
exit=Exit
expiration=Expiration
field_name=Field name
file=File
file_already_in_use=That file is already in use
file_visualizer_append=Append to Existing Data File
file_visualizer_auto_flush=Automatically Flush After Each Data Sample
file_visualizer_browse=Browse...
file_visualizer_close=Close
file_visualizer_file_options=File Options
file_visualizer_filename=Filename
file_visualizer_flush=Flush
file_visualizer_missing_filename=No output filename specified.
file_visualizer_open=Open
file_visualizer_output_file=Write results to file / Read from file
file_visualizer_submit_data=Include Submitted Data
file_visualizer_title=File Reporter
file_visualizer_verbose=Verbose Output
filename=File Name
follow_redirects=Follow Redirects
follow_redirects_auto=Redirect Automatically
foreach_controller_title=ForEach Controller
foreach_input=Input variable prefix
foreach_output=Output variable name
foreach_use_separator=Add "_" before number ?
format=Number format
fr=French
ftp_binary_mode=Use Binary mode ?
ftp_get=get(RETR)
ftp_local_file=Local File:
ftp_local_file_contents=Local File Contents:
ftp_put=put(STOR)
ftp_remote_file=Remote File:
ftp_sample_title=FTP Request Defaults
ftp_save_response_data=Save File in Response ?
ftp_testing_title=FTP Request
function_dialog_menu_item=Function Helper Dialog
function_helper_title=Function Helper
function_name_param=Name of variable in which to store the result (required)
function_name_paropt=Name of variable in which to store the result (optional)
function_params=Function Parameters
functional_mode=Functional Test Mode (i.e. save Response Data and Sampler Data)
functional_mode_explanation=Selecting Functional Test Mode may adversely affect performance.
gaussian_timer_delay=Constant Delay Offset (in milliseconds)\:
gaussian_timer_memo=Adds a random delay with a gaussian distribution
gaussian_timer_range=Deviation (in milliseconds)\:
gaussian_timer_title=Gaussian Random Timer
generate=Generate
generator=Name of Generator class
generator_cnf_msg=Could not find the generator class. Please make sure you place your jar file in the /lib directory.
generator_illegal_msg=Could not access the generator class due to IllegalAccessException.
generator_instantiate_msg=Could not create an instance of the generator parser. Please make sure the generator implements Generator interface.
get_xml_from_file=File with SOAP XML Data (overrides above text)
get_xml_from_random=Message Folder
get_xml_message=Note\: Parsing XML is CPU intensive. Therefore, do not set the thread count
get_xml_message2=too high. In general, 10 threads will consume 100% of the CPU on a 900MHz
get_xml_message3=Pentium 3. On a Pentium 4 2.4GHz cpu, 50 threads is the upper limit. Your
get_xml_message4=options for increasing the number of clients is to increase the number of
get_xml_message5=machines or use multi-cpu systems.
graph_choose_graphs=Graphs to Display
graph_full_results_title=Graph Full Results
graph_results_average=Average
graph_results_data=Data
graph_results_deviation=Deviation
graph_results_latest_sample=Latest Sample
graph_results_median=Median
graph_results_ms=ms
graph_results_no_samples=No of Samples
graph_results_throughput=Throughput
graph_results_title=Graph Results
grouping_add_separators=Add separators between groups
grouping_in_controllers=Put each group in a new controller
grouping_in_transaction_controllers=Put each group in a new transaction controller
grouping_mode=Grouping\:
grouping_no_groups=Do not group samplers
grouping_store_first_only=Store 1st sampler of each group only
header_manager_title=HTTP Header Manager
headers_stored=Headers Stored in the Header Manager
help=Help
help_node=What's this node?
html_assertion_file=Write JTidy report to file
html_assertion_label=HTML Assertion
html_assertion_title=HTML Assertion
html_parameter_mask=HTML Parameter Mask
http_implementation=HTTP Implementation:
http_response_code=HTTP response code
http_url_rewriting_modifier_title=HTTP URL Re-writing Modifier
http_user_parameter_modifier=HTTP User Parameter Modifier
httpmirror_title=HTTP Mirror Server
id_prefix=ID Prefix
id_suffix=ID Suffix
if_controller_evaluate_all=Evaluate for all children?
if_controller_expression=Interpret Condition as Variable Expression?
if_controller_label=Condition (default Javascript)
if_controller_title=If Controller
ignore_subcontrollers=Ignore sub-controller blocks
include_controller=Include Controller
include_equals=Include Equals?
include_path=Include Test Plan
increment=Increment
infinite=Forever
initial_context_factory=Initial Context Factory
insert_after=Insert After
insert_before=Insert Before
insert_parent=Insert Parent
interleave_control_title=Interleave Controller
intsum_param_1=First int to add.
intsum_param_2=Second int to add - further ints can be summed by adding further arguments.
invalid_data=Invalid data
invalid_mail=Error occurred sending the e-mail
invalid_mail_address=One or more invalid e-mail addresses detected
invalid_mail_server=Problem contacting the e-mail server (see JMeter log file)
invalid_variables=Invalid variables
iteration_counter_arg_1=TRUE, for each user to have own counter, FALSE for a global counter
iterator_num=Loop Count\:
ja=Japanese
jar_file=Jar Files
java_request=Java Request
java_request_defaults=Java Request Defaults
javascript_expression=JavaScript expression to evaluate
jexl_expression=JEXL expression to evaluate
jms_auth_required=Required
jms_client_caption=Receiver client uses MessageConsumer.receive() to listen for message.
jms_client_caption2=MessageListener uses onMessage(Message) interface to listen for new messages.
jms_client_type=Client
jms_communication_style=Communication style
jms_concrete_connection_factory=Concrete Connection Factory
jms_config=Message source
jms_config_title=JMS Configuration
jms_connection_factory=Connection Factory
jms_correlation_title=Use alternate fields for message correlation
jms_error_msg=Object message should read from an external file. Text input is currently selected, please remember to change it.
jms_file=File
jms_initial_context_factory=Initial Context Factory
jms_itertions=Number of samples to aggregate
jms_jndi_defaults_title=JNDI Default Configuration
jms_jndi_props=JNDI Properties
jms_map_message=Map Message
jms_message_title=Message properties
jms_message_type=Message Type
jms_msg_content=Content
jms_object_message=Object Message
jms_point_to_point=JMS Point-to-Point
jms_props=JMS Properties
jms_provider_url=Provider URL
jms_publisher=JMS Publisher
jms_pwd=Password
jms_queue=Queue
jms_queue_connection_factory=QueueConnection Factory
jms_queueing=JMS Resources
jms_random_file=Random File
jms_read_response=Read Response
jms_receive_queue=JNDI name Receive queue
jms_request=Request Only
jms_requestreply=Request Response
jms_sample_title=JMS Default Request
jms_send_queue=JNDI name Request queue
jms_stop_between_samples=Stop between samples?
jms_subscriber_on_message=Use MessageListener.onMessage()
jms_subscriber_receive=Use MessageConsumer.receive()
jms_subscriber_title=JMS Subscriber
jms_testing_title=Messaging Request
jms_text_message=Text Message
jms_timeout=Timeout (milliseconds)
jms_topic=Destination
jms_use_auth=Use Authorization?
jms_use_file=From file
jms_use_non_persistent_delivery=Use non-persistent delivery mode?
jms_use_properties_file=Use jndi.properties file
jms_use_random_file=Random File
jms_use_req_msgid_as_correlid=Use Request Message Id
jms_use_res_msgid_as_correlid=Use Response Message Id
jms_use_text=Textarea
jms_user=User
jndi_config_title=JNDI Configuration
jndi_lookup_name=Remote Interface
jndi_lookup_title=JNDI Lookup Configuration
jndi_method_button_invoke=Invoke
jndi_method_button_reflect=Reflect
jndi_method_home_name=Home Method Name
jndi_method_home_parms=Home Method Parameters
jndi_method_name=Method Configuration
jndi_method_remote_interface_list=Remote Interfaces
jndi_method_remote_name=Remote Method Name
jndi_method_remote_parms=Remote Method Parameters
jndi_method_title=Remote Method Configuration
jndi_testing_title=JNDI Request
jndi_url_jndi_props=JNDI Properties
junit_append_error=Append assertion errors
junit_append_exception=Append runtime exceptions
junit_constructor_error=Unable to create an instance of the class
junit_constructor_string=Constructor String Label
junit_do_setup_teardown=Do not call setUp and tearDown
junit_error_code=Error Code
junit_error_default_code=9999
junit_error_default_msg=An unexpected error occured
junit_error_msg=Error Message
junit_failure_code=Failure Code
junit_failure_default_code=0001
junit_failure_default_msg=Test failed
junit_failure_msg=Failure Message
junit_junit4=Search for JUnit 4 annotations (instead of JUnit 3)
junit_pkg_filter=Package Filter
junit_request=JUnit Request
junit_request_defaults=JUnit Request Defaults
junit_success_code=Success Code
junit_success_default_code=1000
junit_success_default_msg=Test successful
junit_success_msg=Success Message
junit_test_config=JUnit Test Parameters
junit_test_method=Test Method
ldap_argument_list=LDAPArgument List
ldap_connto=Connection timeout (in milliseconds)
ldap_parse_results=Parse the search results ?
ldap_sample_title=LDAP Request Defaults
ldap_search_baseobject=Perform baseobject search
ldap_search_onelevel=Perform onelevel search
ldap_search_subtree=Perform subtree search
ldap_secure=Use Secure LDAP Protocol ?
ldap_testing_title=LDAP Request
ldapext_sample_title=LDAP Extended Request Defaults
ldapext_testing_title=LDAP Extended Request
library=Library
load=Load
load_wsdl=Load WSDL
log_errors_only=Errors
log_file=Location of log File
log_function_comment=Additional comment (optional)
log_function_level=Log level (default INFO) or OUT or ERR
log_function_string=String to be logged
log_function_string_ret=String to be logged (and returned)
log_function_throwable=Throwable text (optional)
log_only=Log/Display Only:
log_parser=Name of Log Parser class
log_parser_cnf_msg=Could not find the class. Please make sure you place your jar file in the /lib directory.
log_parser_illegal_msg=Could not access the class due to IllegalAccessException.
log_parser_instantiate_msg=Could not create an instance of the log parser. Please make sure the parser implements LogParser interface.
log_sampler=Tomcat Access Log Sampler
log_success_only=Successes
logic_controller_title=Simple Controller
login_config=Login Configuration
login_config_element=Login Config Element
longsum_param_1=First long to add
longsum_param_2=Second long to add - further longs can be summed by adding further arguments.
loop_controller_title=Loop Controller
looping_control=Looping Control
lower_bound=Lower Bound
mail_reader_account=Username:
mail_reader_all_messages=All
mail_reader_delete=Delete messages from the server
mail_reader_folder=Folder:
mail_reader_num_messages=Number of messages to retrieve:
mail_reader_password=Password:
mail_reader_port=Server Port (optional):
mail_reader_server=Server Host:
mail_reader_server_type=Protocol (e.g. pop3, imaps):
mail_reader_storemime=Store the message using MIME (raw)
mail_reader_title=Mail Reader Sampler
mail_sent=Mail sent successfully
mailer_attributes_panel=Mailing attributes
mailer_error=Couldn't send mail. Please correct any misentries.
mailer_visualizer_title=Mailer Visualizer
match_num_field=Match No. (0 for Random)\:
max=Maximum
maximum_param=The maximum value allowed for a range of values
md5hex_assertion_failure=Error asserting MD5 sum : got {0} but should have been {1}
md5hex_assertion_label=MD5Hex
md5hex_assertion_md5hex_test=MD5Hex to Assert
md5hex_assertion_title=MD5Hex Assertion
memory_cache=Memory Cache
menu_assertions=Assertions
menu_close=Close
menu_collapse_all=Collapse All
menu_config_element=Config Element
menu_edit=Edit
menu_expand_all=Expand All
menu_generative_controller=Sampler
menu_threads=Threads (Users)
menu_listener=Listener
menu_logic_controller=Logic Controller
menu_merge=Merge
menu_modifiers=Modifiers
menu_non_test_elements=Non-Test Elements
menu_open=Open
menu_post_processors=Post Processors
menu_pre_processors=Pre Processors
menu_response_based_modifiers=Response Based Modifiers
menu_tables=Table
menu_timer=Timer
metadata=MetaData
method=Method\:
mimetype=Mimetype
minimum_param=The minimum value allowed for a range of values
minute=minute
modddn=Old entry name
modification_controller_title=Modification Controller
modification_manager_title=Modification Manager
modify_test=Modify Test
modtest=Modification test
module_controller_module_to_run=Module To Run 
module_controller_title=Module Controller
module_controller_warning=Could not find module: 
monitor_equation_active=Active:  (busy/max) > 25%
monitor_equation_dead=Dead:  no response
monitor_equation_healthy=Healthy:  (busy/max) < 25%
monitor_equation_load=Load:  ( (busy / max) * 50) + ( (used memory / max memory) * 50)
monitor_equation_warning=Warning:  (busy/max) > 67%
monitor_health_tab_title=Health
monitor_health_title=Monitor Results
monitor_is_title=Use as Monitor
monitor_label_left_bottom=0 %
monitor_label_left_middle=50 %
monitor_label_left_top=100 %
monitor_label_prefix=Connection Prefix
monitor_label_right_active=Active
monitor_label_right_dead=Dead
monitor_label_right_healthy=Healthy
monitor_label_right_warning=Warning
monitor_legend_health=Health
monitor_legend_load=Load
monitor_legend_memory_per=Memory % (used/total)
monitor_legend_thread_per=Thread % (busy/max)
monitor_load_factor_mem=50
monitor_load_factor_thread=50
monitor_performance_servers=Servers
monitor_performance_tab_title=Performance
monitor_performance_title=Performance Graph
name=Name\:
new=New
newdn=New distinguished name
no=Norwegian
number_of_threads=Number of Threads (users)\:
obsolete_test_element=This test element is obsolete
once_only_controller_title=Once Only Controller
opcode=opCode
open=Open...
option=Options
optional_tasks=Optional Tasks
paramtable=Send Parameters With the Request\:
password=Password
paste=Paste
paste_insert=Paste As Insert
path=Path\:
path_extension_choice=Path Extension (use ";" as separator)
path_extension_dont_use_equals=Do not use equals in path extension (Intershop Enfinity compatibility)
path_extension_dont_use_questionmark=Do not use questionmark in path extension (Intershop Enfinity compatibility)
patterns_to_exclude=URL Patterns to Exclude
patterns_to_include=URL Patterns to Include
pkcs12_desc=PKCS 12 Key (*.p12)
pl=Polish
port=Port\:
property_as_field_label={0}\:
property_default_param=Default value
property_edit=Edit
property_editor.value_is_invalid_message=The text you just entered is not a valid value for this property.\nThe property will be reverted to its previous value.
property_editor.value_is_invalid_title=Invalid input
property_name_param=Name of property
property_returnvalue_param=Return Original Value of property (default false) ?
property_tool_tip={0}\: {1}
property_undefined=Undefined
property_value_param=Value of property
property_visualiser_title=Property Display
protocol=Protocol (default http)\:
protocol_java_border=Java class
protocol_java_classname=Classname\:
protocol_java_config_tile=Configure Java Sample
protocol_java_test_title=Java Testing
provider_url=Provider URL
proxy_assertions=Add Assertions
proxy_cl_error=If specifying a proxy server, host and port must be given
proxy_content_type_exclude=Exclude\:
proxy_content_type_filter=Content-type filter
proxy_content_type_include=Include\:
proxy_daemon_bind_error=Could not create proxy - port in use. Choose another port.
proxy_daemon_error=Could not create proxy - see log for details
proxy_headers=Capture HTTP Headers
proxy_httpsspoofing=Attempt HTTPS Spoofing
proxy_httpsspoofing_match=Only spoof URLs matching:
proxy_regex=Regex matching
proxy_sampler_settings=HTTP Sampler settings
proxy_sampler_type=Type\:
proxy_separators=Add Separators
proxy_target=Target Controller\:
proxy_test_plan_content=Test plan content
proxy_title=HTTP Proxy Server
pt_br=Portugese (Brazilian)
ramp_up=Ramp-Up Period (in seconds)\:
random_control_title=Random Controller
random_order_control_title=Random Order Controller
read_response_message=Read response is not checked. To see the response, please check the box in the sampler.
read_response_note=If read response is unchecked, the sampler will not read the response
read_response_note2=or set the SampleResult. This improves performance, but it means
read_response_note3=the response content won't be logged.
read_soap_response=Read SOAP Response
realm=Realm
record_controller_title=Recording Controller
ref_name_field=Reference Name\:
regex_extractor_title=Regular Expression Extractor
regex_field=Regular Expression\:
regex_source=Response Field to check
regex_src_body=Body
regex_src_body_unescaped=Body (unescaped)
regex_src_hdrs=Headers
regex_src_url=URL
regexfunc_param_1=Regular expression used to search previous sample - or variable.
regexfunc_param_2=Template for the replacement string, using groups from the regular expression.  Format is $[group]$.  Example $1$.
regexfunc_param_3=Which match to use.  An integer 1 or greater, RAND to indicate JMeter should randomly choose, A float, or ALL indicating all matches should be used ([1])
regexfunc_param_4=Between text.  If ALL is selected, the between text will be used to generate the results ([""])
regexfunc_param_5=Default text.  Used instead of the template if the regular expression finds no matches ([""])
regexfunc_param_7=Input variable name containing the text to be parsed ([previous sample])
regexp_tester_button_test=Test
regexp_tester_field=Regular expression\:
regexp_render_no_text=Data response result isn't text.
regexp_tester_title=RegExp Tester
remote_error_init=Error initialising remote server
remote_error_starting=Error starting remote server
remote_exit=Remote Exit
remote_exit_all=Remote Exit All
remote_start=Remote Start
remote_start_all=Remote Start All
remote_stop=Remote Stop
remote_stop_all=Remote Stop All
remove=Remove
rename=Rename entry
report=Report
report_bar_chart=Bar Chart
report_bar_graph_url=URL
report_base_directory=Base Directory
report_chart_caption=Chart Caption
report_chart_x_axis=X Axis
report_chart_x_axis_label=Label for X Axis
report_chart_y_axis=Y Axis
report_chart_y_axis_label=Label for Y Axis
report_line_graph=Line Graph
report_line_graph_urls=Include URLs
report_output_directory=Output Directory for Report
report_page=Report Page
report_page_element=Page Element
report_page_footer=Page Footer
report_page_header=Page Header
report_page_index=Create Page Index
report_page_intro=Page Introduction
report_page_style_url=Stylesheet url
report_page_title=Page Title
report_pie_chart=Pie Chart
report_plan=Report Plan
report_select=Select
report_summary=Report Summary
report_table=Report Table
report_writer=Report Writer
report_writer_html=HTML Report Writer
request_data=Request Data
reset_gui=Reset Gui
response_save_as_md5=Save response as MD5 hash?
restart=Restart
resultaction_title=Result Status Action Handler
resultsaver_errors=Save Failed Responses only
resultsaver_prefix=Filename prefix\:
resultsaver_skipautonumber=Don't add number to prefix
resultsaver_skipsuffix=Don't add suffix
resultsaver_success=Save Successful Responses only
resultsaver_title=Save Responses to a file
resultsaver_variable=Variable Name:
retobj=Return object
reuseconnection=Re-use connection
revert_project=Revert
revert_project?=Revert project?
root=Root
root_title=Root
run=Run
running_test=Running test
runtime_controller_title=Runtime Controller
runtime_seconds=Runtime (seconds)
sample_result_save_configuration=Sample Result Save Configuration
sample_scope=Apply to:
sample_scope_all=Main sample and sub-samples
sample_scope_children=Sub-samples only
sample_scope_parent=Main sample only
sample_scope_variable=JMeter Variable
sampler_label=Label
sampler_on_error_action=Action to be taken after a Sampler error
sampler_on_error_continue=Continue
sampler_on_error_stop_test=Stop Test
sampler_on_error_stop_test_now=Stop Test Now
sampler_on_error_stop_thread=Stop Thread
save=Save
save?=Save?
save_all_as=Save Test Plan as
save_as=Save Selection As...
save_as_error=More than one item selected!
save_as_image=Save Node As Image
save_as_image_all=Save Screen As Image
save_assertionresultsfailuremessage=Save Assertion Failure Message
save_assertions=Save Assertion Results (XML)
save_asxml=Save As XML
save_bytes=Save byte count
save_code=Save Response Code
save_datatype=Save Data Type
save_encoding=Save Encoding
save_fieldnames=Save Field Names (CSV)
save_filename=Save Response Filename
save_graphics=Save Graph
save_hostname=Save Hostname
save_idletime=Save Idle Time
save_label=Save Label
save_latency=Save Latency
save_message=Save Response Message
save_overwrite_existing_file=The selected file already exists, do you want to overwrite it?
save_requestheaders=Save Request Headers (XML)
save_responsedata=Save Response Data (XML)
save_responseheaders=Save Response Headers (XML)
save_samplecount=Save Sample and Error Counts
save_samplerdata=Save Sampler Data (XML)
save_subresults=Save Sub Results (XML)
save_success=Save Success
save_threadcounts=Save Active Thread Counts
save_threadname=Save Thread Name
save_time=Save Elapsed Time
save_timestamp=Save Time Stamp
save_url=Save URL
sbind=Single bind/unbind
scheduler=Scheduler
scheduler_configuration=Scheduler Configuration
scope=Scope
search_base=Search base
search_filter=Search Filter
search_test=Search Test
search_text_button_close=Close
search_text_button_find=Find
search_text_button_next=Find next
search_text_chkbox_case=Case sensitive
search_text_chkbox_regexp=Regular exp.
search_text_field=Search: 
search_text_msg_not_found=Text not found
search_text_title_not_found=Not found
searchbase=Search base
searchfilter=Search Filter
searchtest=Search test
second=second
secure=Secure
send_file=Send Files With the Request\:
send_file_browse=Browse...
send_file_filename_label=File Path\:
send_file_mime_label=MIME Type\:
send_file_param_name_label=Parameter Name\:
server=Server Name or IP\:
servername=Servername \:
session_argument_name=Session Argument Name
should_save=You should save your test plan before running it.  \nIf you are using supporting data files (ie, for CSV Data Set or _StringFromFile), \nthen it is particularly important to first save your test script. \nDo you want to save your test plan first?
shutdown=Shutdown
simple_config_element=Simple Config Element
simple_data_writer_title=Simple Data Writer
size_assertion_comparator_error_equal=been equal to
size_assertion_comparator_error_greater=been greater than
size_assertion_comparator_error_greaterequal=been greater or equal to
size_assertion_comparator_error_less=been less than
size_assertion_comparator_error_lessequal=been less than or equal to
size_assertion_comparator_error_notequal=not been equal to
size_assertion_comparator_label=Type of Comparison
size_assertion_failure=The result was the wrong size\: It was {0} bytes, but should have {1} {2} bytes.
size_assertion_input_error=Please enter a valid positive integer.
size_assertion_label=Size in bytes\:
size_assertion_size_test=Size to Assert
size_assertion_title=Size Assertion
smime_assertion_issuer_dn=Issuer distinguished name
smime_assertion_not_signed=Message not signed
smime_assertion_message_position=Execute assertion on message at position
smime_assertion_signature=Signature
smime_assertion_signer=Signer certificate
smime_assertion_signer_by_file=Certificate file
smime_assertion_signer_constraints=Check values
smime_assertion_signer_dn=Signer distinguished name
smime_assertion_signer_email=Signer email address
smime_assertion_signer_no_check=No check
smime_assertion_signer_serial=Serial Number
smime_assertion_title=SMIME Assertion
smime_assertion_verify_signature=Verify signature
smtp_additional_settings=Additional Settings
smtp_attach_file=Attach file(s):
smtp_attach_file_tooltip=Separate multiple files with ";"
smtp_auth_settings=Auth settings
smtp_bcc=Address To BCC:
smtp_cc=Address To CC:
smtp_default_port=(Defaults: SMTP:25, SSL:465, StartTLS:587)
smtp_eml=Send .eml:
smtp_enabledebug=Enable debug logging?
smtp_enforcestarttls=Enforce StartTLS
smtp_enforcestarttls_tooltip=<html>Enforces the server to use StartTLS.
If not selected and the SMTP-Server doesn't support StartTLS,
a normal SMTP-Connection will be used as fallback instead.
Please note that this checkbox creates a file in \"/tmp/\",
so this will cause problems under windows. smtp_from=Address From: smtp_mail_settings=Mail settings smtp_message=Message: smtp_message_settings=Message settings smtp_messagesize=Calculate message size smtp_password=Password: smtp_sampler_title=SMTP Sampler smtp_security_settings=Security settings smtp_server_port=Port: smtp_server=Server: smtp_server_settings=Server settings smtp_subject=Subject: smtp_to=Address To: smtp_timestamp=Include timestamp in subject smtp_trustall=Trust all certificates smtp_trustall_tooltip=<html>Enforces JMeter to trust all certificates, whatever CA it comes from. smtp_truststore=Local truststore: smtp_truststore_tooltip=<html>The pathname of the truststore.
Relative paths are resolved against the current directory.
Failing that, against the directory containing the test script (JMX file) smtp_useauth=Use Auth smtp_usetruststore=Use local truststore smtp_usetruststore_tooltip=<html>Allows JMeter to use a local truststore. smtp_usenone=Use no security features smtp_username=Username: smtp_usessl=Use SSL smtp_usestarttls=Use StartTLS smtp_header_add=Add Header smtp_header_remove=Remove smtp_header_name=Header Name smtp_header_value=Header Value soap_action=Soap Action soap_data_title=Soap/XML-RPC Data soap_sampler_title=SOAP/XML-RPC Request soap_send_action=Send SOAPAction: spline_visualizer_average=Average spline_visualizer_incoming=Incoming spline_visualizer_maximum=Maximum spline_visualizer_minimum=Minimum spline_visualizer_title=Spline Visualizer spline_visualizer_waitingmessage=Waiting for samples split_function_separator=String to split on. Default is , (comma). split_function_string=String to split ssl_alias_prompt=Please type your preferred alias ssl_alias_select=Select your alias for the test ssl_alias_title=Client Alias ssl_error_title=Key Store Problem ssl_pass_prompt=Please type your password ssl_pass_title=KeyStore Password ssl_port=SSL Port sslmanager=SSL Manager start=Start starttime=Start Time stop=Stop stopping_test=Shutting down all test threads. Please be patient. stopping_test_failed=One or more test threads won't exit; see log file. stopping_test_title=Stopping Test string_from_file_encoding=File encoding if not the platform default (opt) string_from_file_file_name=Enter path (absolute or relative) to file string_from_file_seq_final=Final file sequence number (opt) string_from_file_seq_start=Start file sequence number (opt) summariser_title=Generate Summary Results summary_report=Summary Report switch_controller_label=Switch Value switch_controller_title=Switch Controller table_visualizer_bytes=Bytes table_visualizer_sample_num=Sample # table_visualizer_sample_time=Sample Time(ms) table_visualizer_start_time=Start Time table_visualizer_status=Status table_visualizer_success=Success table_visualizer_thread_name=Thread Name table_visualizer_warning=Warning tcp_classname=TCPClient classname\: tcp_config_title=TCP Sampler Config tcp_nodelay=Set NoDelay tcp_port=Port Number\: tcp_request_data=Text to send tcp_sample_title=TCP Sampler tcp_timeout=Timeout (milliseconds)\: template_field=Template\: test=Test test_action_action=Action test_action_duration=Duration (milliseconds) test_action_pause=Pause test_action_stop=Stop test_action_stop_now=Stop Now test_action_target=Target test_action_target_test=All Threads test_action_target_thread=Current Thread test_action_title=Test Action test_configuration=Test Configuration test_plan=Test Plan test_plan_classpath_browse=Add directory or jar to classpath testconfiguration=Test Configuration testplan.serialized=Run Thread Groups consecutively (i.e. run groups one at a time) testplan_comments=Comments\: testt=Test thread_delay_properties=Thread Delay Properties thread_group_title=Thread Group thread_properties=Thread Properties threadgroup=Thread Group throughput_control_bynumber_label=Total Executions throughput_control_bypercent_label=Percent Executions throughput_control_perthread_label=Per User throughput_control_title=Throughput Controller throughput_control_tplabel=Throughput time_format=Format string for SimpleDateFormat (optional) timelim=Time limit tr=Turkish transaction_controller_parent=Generate parent sample transaction_controller_title=Transaction Controller transaction_controller_include_timers=Include timer duration in generated sample unbind=Thread Unbind unescape_html_string=String to unescape unescape_string=String containing Java escapes uniform_timer_delay=Constant Delay Offset (in milliseconds)\: uniform_timer_memo=Adds a random delay with a uniform distribution uniform_timer_range=Random Delay Maximum (in milliseconds)\: uniform_timer_title=Uniform Random Timer update_per_iter=Update Once Per Iteration upload=File Upload upper_bound=Upper Bound url=URL url_config_get=GET url_config_http=HTTP url_config_https=HTTPS url_config_post=POST url_config_protocol=Protocol\: url_config_title=HTTP Request Defaults url_full_config_title=UrlFull Sample url_multipart_config_title=HTTP Multipart Request Defaults use_expires=Use Cache-Control/Expires header when processing GET requests use_keepalive=Use KeepAlive use_multipart_for_http_post=Use multipart/form-data for HTTP POST use_recording_controller=Use Recording Controller user=User user_defined_test=User Defined Test user_defined_variables=User Defined Variables user_param_mod_help_note=(Do not change this. Instead, modify the file of that name in JMeter's /bin directory) user_parameters_table=Parameters user_parameters_title=User Parameters userdn=Username username=Username userpw=Password value=Value var_name=Reference Name variable_name_param=Name of variable (may include variable and function references) view_graph_tree_title=View Graph Tree view_results_assertion_error=Assertion error: view_results_assertion_failure=Assertion failure: view_results_assertion_failure_message=Assertion failure message: view_results_desc=Shows the text results of sampling in tree form view_results_error_count=Error Count: view_results_fields=fields: view_results_in_table=View Results in Table view_results_latency=Latency: view_results_load_time=Load time: view_results_render=Render: view_results_render_html=HTML view_results_render_html_embedded=HTML (download embedded resources) view_results_render_json=JSON view_results_render_text=Text view_results_render_xml=XML view_results_request_headers=Request Headers: view_results_response_code=Response code: view_results_response_headers=Response headers: view_results_response_message=Response message: view_results_response_too_large_message=Response too large to be displayed. Size: view_results_sample_count=Sample Count: view_results_sample_start=Sample Start: view_results_search_pane=Search pane view_results_size_in_bytes=Size in bytes: view_results_tab_assertion=Assertion result view_results_tab_request=Request view_results_tab_response=Response data view_results_tab_sampler=Sampler result view_results_table_fields_key=Additional field view_results_table_fields_value=Value view_results_table_headers_key=Response header view_results_table_headers_value=Value view_results_table_result_tab_parsed=Parsed view_results_table_result_tab_raw=Raw view_results_thread_name=Thread Name: view_results_title=View Results view_results_tree_title=View Results Tree warning=Warning! web_proxy_server_title=Proxy Server web_request=HTTP Request web_server=Web Server web_server_client=Client implementation: web_server_domain=Server Name or IP\: web_server_port=Port Number\: web_testing2_source_ip=Source IP address: web_testing2_title=HTTP Request HTTPClient web_testing_embedded_url_pattern=Embedded URLs must match\: web_testing_retrieve_images=Retrieve All Embedded Resources from HTML Files web_testing_title=HTTP Request web_server_timeout_connect=Connect: web_server_timeout_response=Response: web_server_timeout_title=Timeouts (milliseconds) webservice_proxy_host=Proxy Host webservice_proxy_note=If Use HTTP Proxy is checked, but no host or port are provided, the sampler webservice_proxy_note2=will look at command line options. If no proxy host or port are provided by webservice_proxy_note3=either, it will fail silently. webservice_proxy_port=Proxy Port webservice_sampler_title=WebService(SOAP) Request webservice_soap_action=SOAPAction webservice_timeout=Timeout: webservice_use_proxy=Use HTTP Proxy while_controller_label=Condition (function or variable) while_controller_title=While Controller workbench_title=WorkBench wsdl_helper_error=The WSDL was not valid, please double check the url. wsdl_url=WSDL URL wsdl_url_error=The WSDL was emtpy. xml_assertion_title=XML Assertion xml_download_dtds=Fetch external DTDs xml_namespace_button=Use Namespaces xml_tolerant_button=Use Tidy (tolerant parser) xml_validate_button=Validate XML xml_whitespace_button=Ignore Whitespace xmlschema_assertion_label=File Name: xmlschema_assertion_title=XML Schema Assertion xpath_assertion_button=Validate xpath_assertion_check=Check XPath Expression xpath_assertion_error=Error with XPath xpath_assertion_failed=Invalid XPath Expression xpath_assertion_label=XPath xpath_assertion_negate=True if nothing matches xpath_assertion_option=XML Parsing Options xpath_assertion_test=XPath Assertion xpath_assertion_tidy=Try and tidy up the input xpath_assertion_title=XPath Assertion xpath_assertion_valid=Valid XPath Expression xpath_assertion_validation=Validate the XML against the DTD xpath_assertion_whitespace=Ignore whitespace xpath_expression=XPath expression to match against xpath_extractor_fragment=Return entire XPath fragment instead of text content? xpath_extractor_query=XPath query: xpath_extractor_title=XPath Extractor xpath_file_file_name=XML file to get values from xpath_tidy_quiet=Quiet xpath_tidy_report_errors=Report errors xpath_tidy_show_warnings=Show warnings you_must_enter_a_valid_number=You must enter a valid number zh_cn=Chinese (Simplified) zh_tw=Chinese (Traditional)

Other JMeter examples (source code examples)

Here is a short list of links related to this JMeter messages.properties source code file:

new blog posts

 

Copyright 1998-2014 Alvin Alexander, alvinalexander.com
All Rights Reserved.