AHA152X_CS

NAME
SYNOPSIS
DESCRIPTION
PARAMETERS
AUTHOR
SEE ALSO

NAME

aha152x_cs − Adaptec AHA-152X compatible PCMCIA device driver

SYNOPSIS

insmod aha152x_cs.o [pc_debug=n] [irq_list=i,j,...] [host_id=n] [reconnect=n] [parity=n] [synchronous=n] [reset_delay=n] [ext_trans=n]

DESCRIPTION

aha152x_cs is the low-level Card Services driver for various PCMCIA SCSI adapters that are compatible with the Adaptec AHA-152X host adapter. These include the New Media Bus Toaster, the Adaptec AHA-1460, and various other OEM cards.

PARAMETERS

pc_debug=n

Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero value enables debugging.

irq_list=i,j,...

Specifies the set of interrupts that may be allocated by this driver.

host_id=n

Specifies the SCSI ID of the host adapter. The default host ID is 7.

reconnect=n

Enables support for disconnect/reconnect, if non-zero. The default is 1 (true).

parity=n

Enables SCSI parity checking. The default is 1 (true).

synchronous=n

Enables negotiation of synchronous SCSI transfers. The default is 0 (false).

reset_delay=n

Specifies a delay for SCSI bus resets, in 10 millisecond intervals. The default is 100.

ext_trans=n

Enables the ‘‘extended translation’’ scheme for partition tables of drives larger than 1 GB.

AUTHOR

David Hinds − dahinds@users.sourceforge.net

SEE ALSO

cardmgr(8), pcmcia(5).