Glassfish example source code file (ControlImpl.java)
The Glassfish ControlImpl.java source code/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright (c) 1997-2010 Oracle and/or its affiliates. All rights reserved.
*
* The contents of this file are subject to the terms of either the GNU
* General Public License Version 2 only ("GPL") or the Common Development
* and Distribution License("CDDL") (collectively, the "License"). You
* may not use this file except in compliance with the License. You can
* obtain a copy of the License at
* https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
* or packager/legal/LICENSE.txt. See the License for the specific
* language governing permissions and limitations under the License.
*
* When distributing the software, include this License Header Notice in each
* file and include the License file at packager/legal/LICENSE.txt.
*
* GPL Classpath Exception:
* Oracle designates this particular file as subject to the "Classpath"
* exception as provided by Oracle in the GPL Version 2 section of the License
* file that accompanied this code.
*
* Modifications:
* If applicable, add the following below the License Header, with the fields
* enclosed by brackets [] replaced by your own identifying information:
* "Portions Copyright [year] [name of copyright owner]"
*
* Contributor(s):
* If you wish your version of this file to be governed by only the CDDL or
* only the GPL Version 2, indicate your decision by adding "[Contributor]
* elects to include this software in this distribution under the [CDDL or GPL
* Version 2] license." If you don't indicate a single choice of license, a
* recipient has the option to distribute your version of this file under
* either the CDDL, the GPL Version 2 or to extend the choice of license to
* its licensees as provided above. However, if you add GPL Version 2 code
* and therefore, elected the GPL Version 2 license, then the option applies
* only if the new code is made subject to such option by the copyright
* holder.
*/
//----------------------------------------------------------------------------
//
// Module: ControlImpl.java
//
// Description: Transaction Control object implementation.
//
// Product: com.sun.jts.CosTransactions
//
// Author: Simon Holdsworth
//
// Date: March, 1997
//
// Copyright (c): 1995-1997 IBM Corp.
//
// The source code for this program is not published or otherwise divested
// of its trade secrets, irrespective of what has been deposited with the
// U.S. Copyright Office.
//
// This software contains confidential and proprietary information of
// IBM Corp.
//----------------------------------------------------------------------------
package com.sun.jts.CosTransactions;
// Import required classes.
import java.util.*;
import org.omg.CORBA.*;
import org.omg.PortableServer.*;
import org.omg.CosTransactions.*;
import org.omg.PortableServer.POAPackage.ServantNotActive;
import org.omg.PortableServer.POAPackage.ServantAlreadyActive;
import com.sun.jts.codegen.otsidl.*;
import java.util.logging.Logger;
import java.util.logging.Level;
import com.sun.logging.LogDomains;
import com.sun.jts.utils.LogFormatter;
/**The ControlImpl interface is our implementation of the standard Control
* interface. It provides operations to set and subsequently obtain the
* Terminator and Coordinator objects from the given context. Our
* implementation also provides a method to obtain the corresponding
* transaction identifiers, and stacking methods.
*
* @version 0.01
*
* @author Simon Holdsworth, IBM Corporation
*
* @see
*/
//----------------------------------------------------------------------------
// CHANGE HISTORY
//
// Version By Change Description
// 0.01 SAJH Initial implementation.
//------------------------------------------------------------------------------
public class ControlImpl extends JControlPOA implements Control {
private static POA poa = null;
private Control thisRef = null;
protected boolean temporary = false;
protected boolean inSuspended = false;
protected Status tranState = Status.StatusActive;
protected CoordinatorImpl coord = null;
protected Coordinator coordRef = null;
protected TerminatorImpl term = null;
protected Terminator termRef = null;
protected ControlImpl stacked = null;
protected GlobalTID globalTID = null;
protected Long localTID = null;
protected boolean representsRemote = false;
protected PropagationContext cachedContext = null;
// Transaction checking values
protected int outgoing = 0;
protected int association = 0;
/**
* Logger to log transaction messages
*/
static Logger _logger = LogDomains.getLogger(Configuration.class, LogDomains.TRANSACTION_LOGGER);
/**Default ControlImpl constructor.
*
* @param
*
* @return
*
* @see
*/
ControlImpl() {
tranState = Status.StatusActive;
// Add the Control object to the set of
// suspended ones for this process.
inSuspended = true;
CurrentTransaction.addSuspended(this);
}
/**Creates and initialises a new ControlImpl, given the TerminatorImpl and
* CoordinatorImpl objects, and the corresponding global and local identifiers.
*
* @param term The Terminator for the transaction.
* @param coord The Coordinator for the transaction.
* @param globalTID The global identifier for the transaction.
* @param localTID The local identifier for the transaction.
*
* @return
*
* @see
*/
ControlImpl( TerminatorImpl term,
CoordinatorImpl coord,
GlobalTID globalTID,
Long localTID ) {
// Set up the instance variables.
this.term = term;
this.coord = coord;
this.globalTID = globalTID;
this.localTID = localTID;
tranState = Status.StatusActive;
// Add the Control object to the set of suspended ones for this process.
inSuspended = true;
CurrentTransaction.addSuspended(this);
// pass this control obj to the terminator to cleanup properly (Ram J)
if (term != null) {
term.setControl(this);
}
}
/**Creates and initialises a new ControlImpl, given a Control object.
* This constructor is used to create a local ControlImpl when a remote factory
* has been used to create the Control object.
*
* @param ref The Control object for the transaction.
*
* @return
*
* @exception Unavailable The required information to set up the Control object
* is not available.
*
* @see
*/
ControlImpl( Control ref )
throws Unavailable {
// Set up the instance variables.
thisRef = ref;
representsRemote = true;
coordRef = ref.get_coordinator();
termRef = ref.get_terminator();
// Get a PropagationContext from the Coordinator, which will contain the
// global TID for the transaction.
try {
cachedContext = coordRef.get_txcontext();
globalTID = new GlobalTID(cachedContext.current.otid);
} catch( Throwable exc ) {
}
tranState = Status.StatusActive;
// Don't add the Control object to the set of suspended ones for this process,
// as we may never get the opportunity to remove it.
//$ CurrentTransaction.addSuspended(this);
}
/**Cleans up the state of the object.
*
* @param
*
* @return
*
* @see
*/
synchronized public void doFinalize() {
// Ensure that this object does not appear in the suspended set.
if( inSuspended )
CurrentTransaction.removeSuspended(this);
inSuspended = false;
// If there is a Terminator reference, destroy the Terminator.
if( term != null ) term.destroy();
// Remove the reference from the map.
/* TN - do not nullify the references yet
thisRef = null;
coord = null;
coordRef = null;
term = null;
termRef = null;
stacked = null;
globalTID = null;
localTID = null;
*/
}
/**Returns the identifier that globally represents the transaction
*
* @param
*
* @return The global identifier.
*
* @see
*/
public GlobalTID getGlobalTID() {
return globalTID;
}
/**Returns the identifier that globally represents the transaction, and a
* value that indicates the state of the transaction.
*
* @param status An object to hold the status value, or null.
*
* @return The global identifier.
*
* @exception SystemException An error occurred. The minor code indicates
* the reason for the exception.
*
* @see
*/
synchronized public otid_t getGlobalTID( StatusHolder status )
throws SystemException {
otid_t result = null;
// Return the transaction state.
if( status != null )
status.value = tranState;
// If the object is asked for its OMGtid and has none, raise an exception.
if( globalTID == null ) {
INTERNAL exc = new INTERNAL(MinorCode.NoGlobalTID,
CompletionStatus.COMPLETED_NO);
throw exc;
}
else
result = globalTID.realTID;
return result;
}
/**Returns the identifier that locally represents the transaction, and a value
* that indicates the state of the transaction.
* <p>
* If the transaction represented by the Control object has been completed,
* the identifier is still returned if possible.
*
* @param status An object to hold the status value, or null.
*
* @return The local transaction identifier.
*
* @exception SystemException An error occurred. The minor code indicates
* the reason for the exception.
*
* @see
*/
synchronized public long getLocalTID( StatusHolder status )
throws SystemException {
long result = 0;
// Return the transaction state.
if( status != null )
status.value = tranState;
// If the internal id has not been defined, raise an exception.
if( localTID == null ) {
INTERNAL exc = new INTERNAL(MinorCode.NoGlobalTID,
CompletionStatus.COMPLETED_NO);
throw exc;
} else {
result = localTID.longValue();
}
return result;
}
/**Returns a reference to the stacked ControlImpl if there is one, otherwise
* returns a NULL reference.
* <p>
* A value is returned that indicates the state of the transaction.
* <p>
* If the transaction represented by the Control object has been completed,
* the reference is still returned if possible.
* The stacked Control object is removed from the stack.
*
* @param status An object to hold the status value, or null.
*
* @return The stacked Control object.
*
* @see
*/
synchronized ControlImpl popControl( StatusHolder status ) {
ControlImpl result = null;
// Return the transaction state.
if( status != null )
status.value = tranState;
// Get the value of the stacked Control object.
// Remove the stacked Control object (if any).
result = stacked;
stacked = null;
return result;
}
/**Stacks the given ControlImpl on the target of the operation, so that it can
* later be restored, and returns a value that indicates the state of the
* transaction.
* If there is already a stacked ControlImpl object, the operation throws an
* exception. If the transaction has already completed, no stacking is done.
*
* @param control The Control object to be stacked.
* @param status An object to hold the status value, or null.
*
* @return
*
* @exception SystemException An error occurred. The minor code indicates
* the reason for the exception.
*
* @see
*/
synchronized void pushControl( ControlImpl control,
StatusHolder status )
throws SystemException {
if( tranState == Status.StatusActive ) {
// If a Control object is already stacked on this one, raise an exception.
if( stacked != null ) {
INTERNAL exc = new INTERNAL(MinorCode.AlreadyStacked,
CompletionStatus.COMPLETED_NO);
throw exc;
}
// Make the stacked Control object the given one.
else
stacked = control;
}
// Return the transaction state.
if( status != null )
status.value = tranState;
}
/**Returns the Terminator object for the transaction.
* We raise the Unavailable exception when there is no Terminator.
* If the transaction has been completed, an appropriate exception is raised.
*
* This operation is part of the OMG interface and must not return any
* exceptions other than those defined in the OMG interface.
*
* @param
*
* @return The Terminator for the transaction.
*
* @exception Unavailable The Terminator object is not available.
* @exception SystemException The operation failed.
*
* @see
*/
synchronized public Terminator get_terminator()
throws Unavailable, SystemException {
Terminator result = termRef;
// If the transaction has been completed, then raise an exception.
// Raise either TRANSACTION_ROLLEDBACK or INVALID_TRANSACTION depending on
// whether the transaction has aborted.
if( tranState == Status.StatusCommitted ) {
INVALID_TRANSACTION exc = new INVALID_TRANSACTION(MinorCode.Completed,
CompletionStatus.COMPLETED_NO);
throw exc;
}
if( tranState == Status.StatusRolledBack ) {
TRANSACTION_ROLLEDBACK exc = new TRANSACTION_ROLLEDBACK(0,CompletionStatus.COMPLETED_NO);
throw exc;
}
// If there is no Terminator reference, but a local Terminator, then get its
// reference and remember it.
if( termRef == null && term != null ) {
termRef = term.object();
result = termRef;
}
// If there is no reference available, throw the Unavailable exception.
if( result == null ) {
Unavailable exc = new Unavailable();
throw exc;
}
return result;
}
synchronized public Terminator get_localTerminator()
throws Unavailable, SystemException {
Terminator result = (Terminator) term;
// If the transaction has been completed, then raise an exception.
// Raise either TRANSACTION_ROLLEDBACK or INVALID_TRANSACTION depending on
// whether the transaction has aborted.
if( tranState == Status.StatusCommitted ) {
INVALID_TRANSACTION exc = new INVALID_TRANSACTION(MinorCode.Completed,
CompletionStatus.COMPLETED_NO);
throw exc;
}
if( tranState == Status.StatusRolledBack ) {
TRANSACTION_ROLLEDBACK exc = new TRANSACTION_ROLLEDBACK(0,CompletionStatus.COMPLETED_NO);
throw exc;
}
// If there is no reference available, throw the Unavailable exception.
if (result == null) {
Unavailable exc = new Unavailable();
throw exc;
}
return result;
}
/**
* Returns the Coordinator for the transaction.
* If the transaction has been completed, an appropriate exception is raised.
*
* This operation is part of the OMG interface and must not return
* any exceptions other than those defined in the OMG interface.
*
* @param
*
* @return The Coordinator for the transaction.
*
* @exception Unavailable The Coordinator is not available.
* @exception SystemException The operation failed.
*
* @see
*/
synchronized public Coordinator get_coordinator()
throws Unavailable, SystemException {
Coordinator result = coordRef;
// If the transaction has been completed, then raise an exception.
// Raise either TRANSACTION_ROLLEDBACK or INVALID_TRANSACTION depending on
// whether the transaction has aborted.
if( tranState == Status.StatusCommitted ) {
INVALID_TRANSACTION exc = new INVALID_TRANSACTION(MinorCode.Completed,
CompletionStatus.COMPLETED_NO);
throw exc;
}
if( tranState == Status.StatusRolledBack ) {
TRANSACTION_ROLLEDBACK exc = new TRANSACTION_ROLLEDBACK(0,CompletionStatus.COMPLETED_NO);
throw exc;
}
// If there is no Coordinator reference, but a local Coordinator, then get its
// reference and remember it.
if( coordRef == null && coord != null ) {
coordRef = coord.object();
result = coordRef;
}
// If there is no reference available, throw the Unavailable exception.
if( result == null ) {
Unavailable exc = new Unavailable();
throw exc;
}
return result;
}
/**
* Returns the Coordinator for the transaction.
* If the transaction has been completed, an appropriate exception is raised.
*
* This operation is part of the OMG interface and must not return
* any exceptions other than those defined in the OMG interface.
*
* @param
*
* @return The Coordinator for the transaction.
*
* @exception Unavailable The Coordinator is not available.
* @exception SystemException The operation failed.
*
* @see
*/
synchronized public Coordinator get_localCoordinator()
throws Unavailable, SystemException {
Coordinator result = (Coordinator) coord;
// If the transaction has been completed, then raise an exception.
// Raise either TRANSACTION_ROLLEDBACK or INVALID_TRANSACTION depending on
// whether the transaction has aborted.
if( tranState == Status.StatusCommitted ) {
INVALID_TRANSACTION exc = new INVALID_TRANSACTION(MinorCode.Completed,
CompletionStatus.COMPLETED_NO);
throw exc;
}
if( tranState == Status.StatusRolledBack ) {
TRANSACTION_ROLLEDBACK exc = new TRANSACTION_ROLLEDBACK(0,CompletionStatus.COMPLETED_NO);
throw exc;
}
// If there is no reference available, throw the Unavailable exception.
if( result == null ) {
Unavailable exc = new Unavailable();
throw exc;
}
return result;
}
/**This operation returns a value indicating that asynchonrous requests issued
* within the context of the current ControlImpl instance have not yet
* completed.
*
* @param
*
* @return Indicates there are outgoing requests.
*
* @see
*/
synchronized boolean isOutgoing() {
boolean result = (outgoing != 0);
return result;
}
/**This operation returns a value which indicates that this ControlImpl instance
* is associated with one or more threads.
*
* @param
*
* @return Indicates an exisiting association.
*
* @see
*/
synchronized boolean isAssociated() {
boolean result = (association != 0);
return result;
}
/**This operation returns the number of thread associations
*
* @param
*
* @return Indicates the number of thread associations.
*
* @see
*/
synchronized int numAssociated() {
int result = association;
return result;
}
/**Increment the thread association count.
*
* @param
*
* @return
*
* @see
*/
synchronized void incrementAssociation() {
association++;
}
/**Decrement the thread association count.
*
* @param
*
* @return Indicates the association count was above zero.
*
* @see
*/
synchronized boolean decrementAssociation() {
boolean result = (association > 0);
if( result ) association--;
return result;
}
/**Increment the incomplete asynchronous request counter.
*
* @param
*
* @return
*
* @see
*/
synchronized void incrementOutgoing() {
outgoing++;
}
/**Decrement the incomplete asynchronous request counter.
*
* @param
*
* @return Indicates the request counter was above zero.
*
* @see
*/
synchronized boolean decrementOutgoing() {
boolean result = (outgoing > 0);
if( result ) outgoing--;
return result;
}
/**Returns the state of the transaction as the Control object knows it.
*
* @param
*
* @return The transaction state.
*
* @see
*/
synchronized public Status getTranState(){
Status result = tranState;
return result;
}
/**Sets the state of the transaction as the Control object knows it.
* No checking is done to verify the state change is valid.
*
* @param int The new state.
*
* @return
*
* @see
*/
synchronized public void setTranState( Status newState ) {
tranState = newState;
}
/**Locates the first stacked ancestor which has not aborted. If there is no
* such ancestor the operation returns null.
*
* @param
*
* @return The first stacked Control which does not represent an aborted
* transaction.
*
* @see
*/
synchronized ControlImpl popAborted() {
// Start with this object's stacked Control.
ControlImpl result = stacked;
boolean validTID = false;
StatusHolder outStatus = new StatusHolder();
while( result != null && !validTID ) {
// Get the local transaction identifier for the stacked Control object,
// and ask the RecoveryManager if it represents a valid transaction.
Long localTID = null;
try {
localTID = new Long(result.getLocalTID(outStatus)); }
catch( Throwable exc ) {}
validTID = RecoveryManager.validLocalTID(localTID);
// If the transaction identifier is not valid, then the transaction must have
// rolled back, so discard it and get its stacked Control object, if any.
if( !validTID ) {
// Get the stacked Control object from the one that represents a rolled
// back transaction, and try to resume that one instead.
ControlImpl stacked = result.popControl(outStatus);
result.destroy();
// Discard the rolled-back Control object and continue until a valid one, or
// no stacked Control is found.
result = stacked;
}
}
return result;
}
/**Determines whether the ControlImpl object represents a remote Control object
* or a local one.
*
* @param
*
* @return Indicates whether the ControlImpl represents a remote Control.
*
* @see
*/
synchronized boolean representsRemoteControl() {
boolean result = representsRemote;
return result;
}
/**Returns the transaction context for the Coordinator.
*
* @param
*
* @return The transaction context.
*
* @exception Unavailable No transaction context is available.
*
* @see
*/
synchronized PropagationContext getTXContext()
throws Unavailable {
PropagationContext result = null;
// If the ControlImpl represents a remote transaction, then use the cached
// context, or get one from the Coordinator if there is no cached context.
if( representsRemote ) {
if( cachedContext == null )
try {
cachedContext = coordRef.get_txcontext();
} catch( OBJECT_NOT_EXIST exc ) {
TRANSACTION_ROLLEDBACK ex2 = new TRANSACTION_ROLLEDBACK(0,CompletionStatus.COMPLETED_NO);
throw ex2;
}
result = cachedContext;
}
// For local transactions, get the context from the Coordinator.
else
result = coord.get_txcontext();
return result;
}
/**Dumps the state of the object.
*
* @param
*
* @return
*
* @see
*/
void dump() {
}
/**Returns the CORBA Object which represents this object.
*
* @param
*
* @return The CORBA object.
*
* @see
*/
synchronized final Control object() {
if( thisRef == null ) {
if( poa == null )
poa = Configuration.getPOA("transient"/*#Frozen*/);
try {
poa.activate_object(this);
thisRef = ControlHelper.narrow(poa.servant_to_reference(this));
} catch( ServantAlreadyActive sexc ) {
_logger.log(Level.SEVERE,"jts.create_control_object_error",sexc);
String msg = LogFormatter.getLocalizedMessage(_logger,
"jts.create_control_object_error");
throw new org.omg.CORBA.INTERNAL(msg);
} catch( ServantNotActive snexc ) {
_logger.log(Level.SEVERE,"jts.create_control_object_error",snexc);
String msg = LogFormatter.getLocalizedMessage(_logger,
"jts.create_control_object_error");
throw new org.omg.CORBA.INTERNAL(msg);
} catch( Exception exc ) {
_logger.log(Level.SEVERE,"jts.create_control_object_error",exc);
String msg = LogFormatter.getLocalizedMessage(_logger,
"jts.create_control_object_error");
throw new org.omg.CORBA.INTERNAL(msg);
}
}
return thisRef;
}
/**Returns the ControlImpl which serves the given object.
*
* @param The CORBA Object.
*
* @return The ControlImpl object which serves it.
*
* @see
*/
synchronized public static final ControlImpl servant( JControl control ) {
ControlImpl result = null;
// GDH we will not be able to obtain the
// servant from our local POA for a proxy control object.
// so return null
if ( control != null && Configuration.getProxyChecker().isProxy(control)) {
return result;
}
if( control instanceof ControlImpl ) {
result = (ControlImpl)control;
} else if( poa != null )
try {
result = (ControlImpl)poa.reference_to_servant(control);
if( result.thisRef == null )
result.thisRef = control;
} catch( Exception exc ) {
_logger.log(Level.WARNING,"jts.cannot_locate_servant","Control");
}
return result;
}
/**Destroys the ControlImpl object.
*
* @param
*
* @return
*
* @see
*/
synchronized final void destroy() {
// GDH: We have no desire to destroy an underlying remote control object, instead we
// release it. We will finalise the local control wrapper below
if ( thisRef != null && Configuration.getProxyChecker().isProxy(thisRef)) {
thisRef._release();
} else {
if( poa != null &&
thisRef != null )
try {
poa.deactivate_object(poa.reference_to_id(thisRef));
thisRef = null;
} catch( Exception exc ) {
_logger.log(Level.WARNING,"jts.object_destroy_error","Control");
}
}
doFinalize();
}
/**Added to prevent null delegate problem.
*
* @param
*
* @return
*
* @see
*/
public boolean equals(java.lang.Object o) {
return this == o;
}
/**Added because this class overrides equals() method.
*
*/
@Override
public int hashCode() {
return System.identityHashCode(this);
}
/*
* These methods are there to satisy the compiler. At some point
* when we move towards a tie based model, the org.omg.Corba.Object
* interface method implementation below shall be discarded.
*/
private static org.omg.CORBA.NO_IMPLEMENT no_implement =
new org.omg.CORBA.NO_IMPLEMENT("This is a locally constrained object.");
public org.omg.CORBA.Object _duplicate() {
throw no_implement;
}
public void _release() {
throw no_implement;
}
public boolean _is_a(String repository_id) {
throw no_implement;
}
public boolean _is_equivalent(org.omg.CORBA.Object that) {
throw no_implement;
}
public boolean _non_existent() {
throw no_implement;
}
public int _hash(int maximum) {
throw no_implement;
}
public Request _request(String operation) {
throw no_implement;
}
public Request _create_request(Context ctx,
String operation,
NVList arg_list,
NamedValue result) {
throw no_implement;
}
public Request _create_request(Context ctx,
String operation,
NVList arg_list,
NamedValue result,
ExceptionList exceptions,
ContextList contexts) {
throw no_implement;
}
public org.omg.CORBA.Object _get_interface_def() {
throw no_implement;
}
public org.omg.CORBA.Policy _get_policy(int policy_type) {
throw no_implement;
}
public org.omg.CORBA.DomainManager[] _get_domain_managers() {
throw no_implement;
}
public org.omg.CORBA.Object _set_policy_override(
org.omg.CORBA.Policy[] policies,
org.omg.CORBA.SetOverrideType set_add) {
throw no_implement;
}
}
Other Glassfish examples (source code examples)Here is a short list of links related to this Glassfish ControlImpl.java source code file: |
The search page
Other Glassfish source code examples at this package level
Click here to learn more about this project
