Glassfish example source code file (ThresholdingOutputStream.java)

This example Glassfish source code file (ThresholdingOutputStream.java) is included in the DevDaily.com "Java Source Code Warehouse" project. The intent of this project is to help you "Learn Java by Example" ^TM.

Java - Glassfish tags/keywords

io, ioexception, ioexception, outputstream, outputstream, thresholdingoutputstream, thresholdingoutputstream

The Glassfish ThresholdingOutputStream.java source code

/*
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
 *
 * Copyright (c) 1997-2010 Oracle and/or its affiliates. All rights reserved.
 *
 * The contents of this file are subject to the terms of either the GNU
 * General Public License Version 2 only ("GPL") or the Common Development
 * and Distribution License("CDDL") (collectively, the "License").  You
 * may not use this file except in compliance with the License.  You can
 * obtain a copy of the License at
 * https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
 * or packager/legal/LICENSE.txt.  See the License for the specific
 * language governing permissions and limitations under the License.
 *
 * When distributing the software, include this License Header Notice in each
 * file and include the License file at packager/legal/LICENSE.txt.
 *
 * GPL Classpath Exception:
 * Oracle designates this particular file as subject to the "Classpath"
 * exception as provided by Oracle in the GPL Version 2 section of the License
 * file that accompanied this code.
 *
 * Modifications:
 * If applicable, add the following below the License Header, with the fields
 * enclosed by brackets [] replaced by your own identifying information:
 * "Portions Copyright [year] [name of copyright owner]"
 *
 * Contributor(s):
 * If you wish your version of this file to be governed by only the CDDL or
 * only the GPL Version 2, indicate your decision by adding "[Contributor]
 * elects to include this software in this distribution under the [CDDL or GPL
 * Version 2] license."  If you don't indicate a single choice of license, a
 * recipient has the option to distribute your version of this file under
 * either the CDDL, the GPL Version 2 or to extend the choice of license to
 * its licensees as provided above.  However, if you add GPL Version 2 code
 * and therefore, elected the GPL Version 2 license, then the option applies
 * only if the new code is made subject to such option by the copyright
 * holder.
 *
 *
 * This file incorporates work covered by the following copyright and
 * permission notice:
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package org.apache.catalina.fileupload;

import java.io.IOException;
import java.io.OutputStream;


/**
 * An output stream which triggers an event when a specified number of bytes of
 * data have been written to it. The event can be used, for example, to throw
 * an exception if a maximum has been reached, or to switch the underlying
 * stream type when the threshold is exceeded.
 * <p>
 * This class overrides all <code>OutputStream methods. However, these
 * overrides ultimately call the corresponding methods in the underlying output
 * stream implementation.
 * <p>
 * NOTE: This implementation may trigger the event <em>before the threshold
 * is actually reached, since it triggers when a pending write operation would
 * cause the threshold to be exceeded.
 *
 * @author <a href="mailto:martinc@apache.org">Martin Cooper
 *
 * @version $Id: ThresholdingOutputStream.java 540714 2007-05-22 19:39:44Z niallp $
 */
abstract class ThresholdingOutputStream
    extends OutputStream
{

    // ----------------------------------------------------------- Data members


    /**
     * The threshold at which the event will be triggered.
     */
    private int threshold;


    /**
     * The number of bytes written to the output stream.
     */
    private long written;


    /**
     * Whether or not the configured threshold has been exceeded.
     */
    private boolean thresholdExceeded;


    // ----------------------------------------------------------- Constructors


    /**
     * Constructs an instance of this class which will trigger an event at the
     * specified threshold.
     *
     * @param threshold The number of bytes at which to trigger an event.
     */
    public ThresholdingOutputStream(int threshold)
    {
        this.threshold = threshold;
    }


    // --------------------------------------------------- OutputStream methods


    /**
     * Writes the specified byte to this output stream.
     *
     * @param b The byte to be written.
     *
     * @exception IOException if an error occurs.
     */
    public void write(int b) throws IOException
    {
        checkThreshold(1);
        getStream().write(b);
        written++;
    }


    /**
     * Writes <code>b.length bytes from the specified byte array to this
     * output stream.
     *
     * @param b The array of bytes to be written.
     *
     * @exception IOException if an error occurs.
     */
    public void write(byte b[]) throws IOException
    {
        checkThreshold(b.length);
        getStream().write(b);
        written += b.length;
    }


    /**
     * Writes <code>len bytes from the specified byte array starting at
     * offset <code>off to this output stream.
     *
     * @param b   The byte array from which the data will be written.
     * @param off The start offset in the byte array.
     * @param len The number of bytes to write.
     *
     * @exception IOException if an error occurs.
     */
    public void write(byte b[], int off, int len) throws IOException
    {
        checkThreshold(len);
        getStream().write(b, off, len);
        written += len;
    }


    /**
     * Flushes this output stream and forces any buffered output bytes to be
     * written out.
     *
     * @exception IOException if an error occurs.
     */
    public void flush() throws IOException
    {
        getStream().flush();
    }


    /**
     * Closes this output stream and releases any system resources associated
     * with this stream.
     *
     * @exception IOException if an error occurs.
     */
    public void close() throws IOException
    {
        try
        {
            flush();
        }
        catch (IOException ignored)
        {
            // ignore
        }
        getStream().close();
    }


    // --------------------------------------------------------- Public methods


    /**
     * Returns the threshold, in bytes, at which an event will be triggered.
     *
     * @return The threshold point, in bytes.
     */
    public int getThreshold()
    {
        return threshold;
    }


    /**
     * Returns the number of bytes that have been written to this output stream.
     *
     * @return The number of bytes written.
     */
    public long getByteCount()
    {
        return written;
    }


    /**
     * Determines whether or not the configured threshold has been exceeded for
     * this output stream.
     *
     * @return <code>true if the threshold has been reached;
     *         <code>false otherwise.
     */
    public boolean isThresholdExceeded()
    {
        return (written > threshold);
    }


    // ------------------------------------------------------ Protected methods


    /**
     * Checks to see if writing the specified number of bytes would cause the
     * configured threshold to be exceeded. If so, triggers an event to allow
     * a concrete implementation to take action on this.
     *
     * @param count The number of bytes about to be written to the underlying
     *              output stream.
     *
     * @exception IOException if an error occurs.
     */
    protected void checkThreshold(int count) throws IOException
    {
        if (!thresholdExceeded && (written + count > threshold))
        {
            thresholdExceeded = true;
            thresholdReached();
        }
    }

    /**
     * Resets the byteCount to zero.  You can call this from 
     * {@link #thresholdReached()} if you want the event to be triggered again. 
     */
    protected void resetByteCount() 
    {
        this.thresholdExceeded = false;
        this.written = 0;
    }

    // ------------------------------------------------------- Abstract methods


    /**
     * Returns the underlying output stream, to which the corresponding
     * <code>OutputStream methods in this class will ultimately delegate.
     *
     * @return The underlying output stream.
     *
     * @exception IOException if an error occurs.
     */
    protected abstract OutputStream getStream() throws IOException;


    /**
     * Indicates that the configured threshold has been reached, and that a
     * subclass should take whatever action necessary on this event. This may
     * include changing the underlying output stream.
     *
     * @exception IOException if an error occurs.
     */
    protected abstract void thresholdReached() throws IOException;
}