|
|
Java example source code file (WritableRaster.java)
This example Java source code file (WritableRaster.java) is included in the alvinalexander.com
"Java Source Code
Warehouse" project. The intent of this project is to help you "Learn
Java by Example" TM.
Learn more about this Java project at its project page.
The WritableRaster.java Java example source code
/*
* Copyright (c) 1997, 2013, Oracle and/or its affiliates. All rights reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation. Oracle designates this
* particular file as subject to the "Classpath" exception as provided
* by Oracle in the LICENSE file that accompanied this code.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*/
/* ****************************************************************
******************************************************************
******************************************************************
*** COPYRIGHT (c) Eastman Kodak Company, 1997
*** As an unpublished work pursuant to Title 17 of the United
*** States Code. All rights reserved.
******************************************************************
******************************************************************
******************************************************************/
package java.awt.image;
import java.awt.Rectangle;
import java.awt.Point;
/**
* This class extends Raster to provide pixel writing capabilities.
* Refer to the class comment for Raster for descriptions of how
* a Raster stores pixels.
*
* <p> The constructors of this class are protected. To instantiate
* a WritableRaster, use one of the createWritableRaster factory methods
* in the Raster class.
*/
public class WritableRaster extends Raster {
/**
* Constructs a WritableRaster with the given SampleModel. The
* WritableRaster's upper left corner is origin and it is the
* same size as the SampleModel. A DataBuffer large enough to
* describe the WritableRaster is automatically created.
* @param sampleModel The SampleModel that specifies the layout.
* @param origin The Point that specifies the origin.
* @throws RasterFormatException if computing either
* <code>origin.x + sampleModel.getWidth() or
* <code>origin.y + sampleModel.getHeight() results
* in integer overflow
*/
protected WritableRaster(SampleModel sampleModel,
Point origin) {
this(sampleModel,
sampleModel.createDataBuffer(),
new Rectangle(origin.x,
origin.y,
sampleModel.getWidth(),
sampleModel.getHeight()),
origin,
null);
}
/**
* Constructs a WritableRaster with the given SampleModel and DataBuffer.
* The WritableRaster's upper left corner is origin and it is the same
* size as the SampleModel. The DataBuffer is not initialized and must
* be compatible with SampleModel.
* @param sampleModel The SampleModel that specifies the layout.
* @param dataBuffer The DataBuffer that contains the image data.
* @param origin The Point that specifies the origin.
* @throws RasterFormatException if computing either
* <code>origin.x + sampleModel.getWidth() or
* <code>origin.y + sampleModel.getHeight() results
* in integer overflow
*/
protected WritableRaster(SampleModel sampleModel,
DataBuffer dataBuffer,
Point origin) {
this(sampleModel,
dataBuffer,
new Rectangle(origin.x,
origin.y,
sampleModel.getWidth(),
sampleModel.getHeight()),
origin,
null);
}
/**
* Constructs a WritableRaster with the given SampleModel, DataBuffer,
* and parent. aRegion specifies the bounding rectangle of the new
* Raster. When translated into the base Raster's coordinate
* system, aRegion must be contained by the base Raster.
* (The base Raster is the Raster's ancestor which has no parent.)
* sampleModelTranslate specifies the sampleModelTranslateX and
* sampleModelTranslateY values of the new Raster.
*
* Note that this constructor should generally be called by other
* constructors or create methods, it should not be used directly.
* @param sampleModel The SampleModel that specifies the layout.
* @param dataBuffer The DataBuffer that contains the image data.
* @param aRegion The Rectangle that specifies the image area.
* @param sampleModelTranslate The Point that specifies the translation
* from SampleModel to Raster coordinates.
* @param parent The parent (if any) of this raster.
* @throws RasterFormatException if <code>aRegion has width
* or height less than or equal to zero, or computing either
* <code>aRegion.x + aRegion.width or
* <code>aRegion.y + aRegion.height results in integer
* overflow
*/
protected WritableRaster(SampleModel sampleModel,
DataBuffer dataBuffer,
Rectangle aRegion,
Point sampleModelTranslate,
WritableRaster parent){
super(sampleModel,dataBuffer,aRegion,sampleModelTranslate,parent);
}
/** Returns the parent WritableRaster (if any) of this WritableRaster,
* or else null.
* @return the parent of this <code>WritableRaster, or
* <code>null.
*/
public WritableRaster getWritableParent() {
return (WritableRaster)parent;
}
/**
* Create a WritableRaster with the same size, SampleModel and DataBuffer
* as this one, but with a different location. The new WritableRaster
* will possess a reference to the current WritableRaster, accessible
* through its getParent() and getWritableParent() methods.
*
* @param childMinX X coord of the upper left corner of the new Raster.
* @param childMinY Y coord of the upper left corner of the new Raster.
* @return a <code>WritableRaster the same as this one except
* for the specified location.
* @throws RasterFormatException if computing either
* <code>childMinX + this.getWidth() or
* <code>childMinY + this.getHeight() results in integer
* overflow
*/
public WritableRaster createWritableTranslatedChild(int childMinX,
int childMinY) {
return createWritableChild(minX,minY,width,height,
childMinX,childMinY,null);
}
/**
* Returns a new WritableRaster which shares all or part of this
* WritableRaster's DataBuffer. The new WritableRaster will
* possess a reference to the current WritableRaster, accessible
* through its getParent() and getWritableParent() methods.
*
* <p> The parentX, parentY, width and height parameters form a
* Rectangle in this WritableRaster's coordinate space, indicating
* the area of pixels to be shared. An error will be thrown if
* this Rectangle is not contained with the bounds of the current
* WritableRaster.
*
* <p> The new WritableRaster may additionally be translated to a
* different coordinate system for the plane than that used by the current
* WritableRaster. The childMinX and childMinY parameters give
* the new (x, y) coordinate of the upper-left pixel of the
* returned WritableRaster; the coordinate (childMinX, childMinY)
* in the new WritableRaster will map to the same pixel as the
* coordinate (parentX, parentY) in the current WritableRaster.
*
* <p> The new WritableRaster may be defined to contain only a
* subset of the bands of the current WritableRaster, possibly
* reordered, by means of the bandList parameter. If bandList is
* null, it is taken to include all of the bands of the current
* WritableRaster in their current order.
*
* <p> To create a new WritableRaster that contains a subregion of
* the current WritableRaster, but shares its coordinate system
* and bands, this method should be called with childMinX equal to
* parentX, childMinY equal to parentY, and bandList equal to
* null.
*
* @param parentX X coordinate of the upper left corner in this
* WritableRaster's coordinates.
* @param parentY Y coordinate of the upper left corner in this
* WritableRaster's coordinates.
* @param w Width of the region starting at (parentX, parentY).
* @param h Height of the region starting at (parentX, parentY).
* @param childMinX X coordinate of the upper left corner of
* the returned WritableRaster.
* @param childMinY Y coordinate of the upper left corner of
* the returned WritableRaster.
* @param bandList Array of band indices, or null to use all bands.
* @return a <code>WritableRaster sharing all or part of the
* <code>DataBuffer of this WritableRaster.
* @exception RasterFormatException if the subregion is outside of the
* raster bounds.
* @throws RasterFormatException if <code>w or
* <code>h
* is less than or equal to zero, or computing any of
* <code>parentX + w, parentY + h,
* <code>childMinX + w, or
* <code>childMinY + h results in integer
* overflow
*/
public WritableRaster createWritableChild(int parentX, int parentY,
int w, int h,
int childMinX, int childMinY,
int bandList[]) {
if (parentX < this.minX) {
throw new RasterFormatException("parentX lies outside raster");
}
if (parentY < this.minY) {
throw new RasterFormatException("parentY lies outside raster");
}
if ((parentX+w < parentX) || (parentX+w > this.width + this.minX)) {
throw new RasterFormatException("(parentX + width) is outside raster");
}
if ((parentY+h < parentY) || (parentY+h > this.height + this.minY)) {
throw new RasterFormatException("(parentY + height) is outside raster");
}
SampleModel sm;
// Note: the SampleModel for the child Raster should have the same
// width and height as that for the parent, since it represents
// the physical layout of the pixel data. The child Raster's width
// and height represent a "virtual" view of the pixel data, so
// they may be different than those of the SampleModel.
if (bandList != null) {
sm = sampleModel.createSubsetSampleModel(bandList);
}
else {
sm = sampleModel;
}
int deltaX = childMinX - parentX;
int deltaY = childMinY - parentY;
return new WritableRaster(sm,
getDataBuffer(),
new Rectangle(childMinX,childMinY,
w, h),
new Point(sampleModelTranslateX+deltaX,
sampleModelTranslateY+deltaY),
this);
}
/**
* Sets the data for a single pixel from a
* primitive array of type TransferType. For image data supported by
* the Java 2D(tm) API, this will be one of DataBuffer.TYPE_BYTE,
* DataBuffer.TYPE_USHORT, DataBuffer.TYPE_INT, DataBuffer.TYPE_SHORT,
* DataBuffer.TYPE_FLOAT, or DataBuffer.TYPE_DOUBLE. Data in the array
* may be in a packed format, thus increasing efficiency for data
* transfers.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds, or if inData is not large enough to hold the pixel data.
* However, explicit bounds checking is not guaranteed.
* A ClassCastException will be thrown if the input object is not null
* and references anything other than an array of TransferType.
* @see java.awt.image.SampleModel#setDataElements(int, int, Object, DataBuffer)
* @param x The X coordinate of the pixel location.
* @param y The Y coordinate of the pixel location.
* @param inData An object reference to an array of type defined by
* getTransferType() and length getNumDataElements()
* containing the pixel data to place at x,y.
*
* @throws ArrayIndexOutOfBoundsException if the coordinates are not
* in bounds, or if inData is too small to hold the input.
*/
public void setDataElements(int x, int y, Object inData) {
sampleModel.setDataElements(x-sampleModelTranslateX,
y-sampleModelTranslateY,
inData, dataBuffer);
}
/**
* Sets the data for a rectangle of pixels from an input Raster.
* The input Raster must be compatible with this WritableRaster
* in that they must have the same number of bands, corresponding bands
* must have the same number of bits per sample, the TransferTypes
* and NumDataElements must be the same, and the packing used by
* the getDataElements/setDataElements must be identical.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds.
* However, explicit bounds checking is not guaranteed.
* @param x The X coordinate of the pixel location.
* @param y The Y coordinate of the pixel location.
* @param inRaster Raster containing data to place at x,y.
*
* @throws NullPointerException if inRaster is null.
* @throws ArrayIndexOutOfBoundsException if the coordinates are not
* in bounds.
*/
public void setDataElements(int x, int y, Raster inRaster) {
int dstOffX = x+inRaster.getMinX();
int dstOffY = y+inRaster.getMinY();
int width = inRaster.getWidth();
int height = inRaster.getHeight();
if ((dstOffX < this.minX) || (dstOffY < this.minY) ||
(dstOffX + width > this.minX + this.width) ||
(dstOffY + height > this.minY + this.height)) {
throw new ArrayIndexOutOfBoundsException
("Coordinate out of bounds!");
}
int srcOffX = inRaster.getMinX();
int srcOffY = inRaster.getMinY();
Object tdata = null;
for (int startY=0; startY < height; startY++) {
tdata = inRaster.getDataElements(srcOffX, srcOffY+startY,
width, 1, tdata);
setDataElements(dstOffX, dstOffY+startY,
width, 1, tdata);
}
}
/**
* Sets the data for a rectangle of pixels from a
* primitive array of type TransferType. For image data supported by
* the Java 2D API, this will be one of DataBuffer.TYPE_BYTE,
* DataBuffer.TYPE_USHORT, DataBuffer.TYPE_INT, DataBuffer.TYPE_SHORT,
* DataBuffer.TYPE_FLOAT, or DataBuffer.TYPE_DOUBLE. Data in the array
* may be in a packed format, thus increasing efficiency for data
* transfers.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds, or if inData is not large enough to hold the pixel data.
* However, explicit bounds checking is not guaranteed.
* A ClassCastException will be thrown if the input object is not null
* and references anything other than an array of TransferType.
* @see java.awt.image.SampleModel#setDataElements(int, int, int, int, Object, DataBuffer)
* @param x The X coordinate of the upper left pixel location.
* @param y The Y coordinate of the upper left pixel location.
* @param w Width of the pixel rectangle.
* @param h Height of the pixel rectangle.
* @param inData An object reference to an array of type defined by
* getTransferType() and length w*h*getNumDataElements()
* containing the pixel data to place between x,y and
* x+w-1, y+h-1.
*
* @throws NullPointerException if inData is null.
* @throws ArrayIndexOutOfBoundsException if the coordinates are not
* in bounds, or if inData is too small to hold the input.
*/
public void setDataElements(int x, int y, int w, int h, Object inData) {
sampleModel.setDataElements(x-sampleModelTranslateX,
y-sampleModelTranslateY,
w,h,inData,dataBuffer);
}
/**
* Copies pixels from Raster srcRaster to this WritableRaster. Each pixel
* in srcRaster is copied to the same x,y address in this raster, unless
* the address falls outside the bounds of this raster. srcRaster
* must have the same number of bands as this WritableRaster. The
* copy is a simple copy of source samples to the corresponding destination
* samples.
* <p>
* If all samples of both source and destination Rasters are of
* integral type and less than or equal to 32 bits in size, then calling
* this method is equivalent to executing the following code for all
* <code>x,y addresses valid in both Rasters.
* <pre>{@code
* Raster srcRaster;
* WritableRaster dstRaster;
* for (int b = 0; b < srcRaster.getNumBands(); b++) {
* dstRaster.setSample(x, y, b, srcRaster.getSample(x, y, b));
* }
* }</pre>
* Thus, when copying an integral type source to an integral type
* destination, if the source sample size is greater than the destination
* sample size for a particular band, the high order bits of the source
* sample are truncated. If the source sample size is less than the
* destination size for a particular band, the high order bits of the
* destination are zero-extended or sign-extended depending on whether
* srcRaster's SampleModel treats the sample as a signed or unsigned
* quantity.
* <p>
* When copying a float or double source to an integral type destination,
* each source sample is cast to the destination type. When copying an
* integral type source to a float or double destination, the source
* is first converted to a 32-bit int (if necessary), using the above
* rules for integral types, and then the int is cast to float or
* double.
* <p>
* @param srcRaster The Raster from which to copy pixels.
*
* @throws NullPointerException if srcRaster is null.
*/
public void setRect(Raster srcRaster) {
setRect(0,0,srcRaster);
}
/**
* Copies pixels from Raster srcRaster to this WritableRaster.
* For each (x, y) address in srcRaster, the corresponding pixel
* is copied to address (x+dx, y+dy) in this WritableRaster,
* unless (x+dx, y+dy) falls outside the bounds of this raster.
* srcRaster must have the same number of bands as this WritableRaster.
* The copy is a simple copy of source samples to the corresponding
* destination samples. For details, see
* {@link WritableRaster#setRect(Raster)}.
*
* @param dx The X translation factor from src space to dst space
* of the copy.
* @param dy The Y translation factor from src space to dst space
* of the copy.
* @param srcRaster The Raster from which to copy pixels.
*
* @throws NullPointerException if srcRaster is null.
*/
public void setRect(int dx, int dy, Raster srcRaster) {
int width = srcRaster.getWidth();
int height = srcRaster.getHeight();
int srcOffX = srcRaster.getMinX();
int srcOffY = srcRaster.getMinY();
int dstOffX = dx+srcOffX;
int dstOffY = dy+srcOffY;
// Clip to this raster
if (dstOffX < this.minX) {
int skipX = this.minX - dstOffX;
width -= skipX;
srcOffX += skipX;
dstOffX = this.minX;
}
if (dstOffY < this.minY) {
int skipY = this.minY - dstOffY;
height -= skipY;
srcOffY += skipY;
dstOffY = this.minY;
}
if (dstOffX+width > this.minX+this.width) {
width = this.minX + this.width - dstOffX;
}
if (dstOffY+height > this.minY+this.height) {
height = this.minY + this.height - dstOffY;
}
if (width <= 0 || height <= 0) {
return;
}
switch (srcRaster.getSampleModel().getDataType()) {
case DataBuffer.TYPE_BYTE:
case DataBuffer.TYPE_SHORT:
case DataBuffer.TYPE_USHORT:
case DataBuffer.TYPE_INT:
int[] iData = null;
for (int startY=0; startY < height; startY++) {
// Grab one scanline at a time
iData =
srcRaster.getPixels(srcOffX, srcOffY+startY, width, 1,
iData);
setPixels(dstOffX, dstOffY+startY, width, 1, iData);
}
break;
case DataBuffer.TYPE_FLOAT:
float[] fData = null;
for (int startY=0; startY < height; startY++) {
fData =
srcRaster.getPixels(srcOffX, srcOffY+startY, width, 1,
fData);
setPixels(dstOffX, dstOffY+startY, width, 1, fData);
}
break;
case DataBuffer.TYPE_DOUBLE:
double[] dData = null;
for (int startY=0; startY < height; startY++) {
// Grab one scanline at a time
dData =
srcRaster.getPixels(srcOffX, srcOffY+startY, width, 1,
dData);
setPixels(dstOffX, dstOffY+startY, width, 1, dData);
}
break;
}
}
/**
* Sets a pixel in the DataBuffer using an int array of samples for input.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds.
* However, explicit bounds checking is not guaranteed.
* @param x The X coordinate of the pixel location.
* @param y The Y coordinate of the pixel location.
* @param iArray The input samples in a int array.
*
* @throws NullPointerException if iArray is null.
* @throws ArrayIndexOutOfBoundsException if the coordinates are not
* in bounds, or if iArray is too small to hold the input.
*/
public void setPixel(int x, int y, int iArray[]) {
sampleModel.setPixel(x-sampleModelTranslateX,y-sampleModelTranslateY,
iArray,dataBuffer);
}
/**
* Sets a pixel in the DataBuffer using a float array of samples for input.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds.
* However, explicit bounds checking is not guaranteed.
* @param x The X coordinate of the pixel location.
* @param y The Y coordinate of the pixel location.
* @param fArray The input samples in a float array.
*
* @throws NullPointerException if fArray is null.
* @throws ArrayIndexOutOfBoundsException if the coordinates are not
* in bounds, or if fArray is too small to hold the input.
*/
public void setPixel(int x, int y, float fArray[]) {
sampleModel.setPixel(x-sampleModelTranslateX,y-sampleModelTranslateY,
fArray,dataBuffer);
}
/**
* Sets a pixel in the DataBuffer using a double array of samples for input.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds.
* However, explicit bounds checking is not guaranteed.
* @param x The X coordinate of the pixel location.
* @param y The Y coordinate of the pixel location.
* @param dArray The input samples in a double array.
*
* @throws NullPointerException if dArray is null.
* @throws ArrayIndexOutOfBoundsException if the coordinates are not
* in bounds, or if dArray is too small to hold the input.
*/
public void setPixel(int x, int y, double dArray[]) {
sampleModel.setPixel(x-sampleModelTranslateX,y-sampleModelTranslateY,
dArray,dataBuffer);
}
/**
* Sets all samples for a rectangle of pixels from an int array containing
* one sample per array element.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds.
* However, explicit bounds checking is not guaranteed.
* @param x The X coordinate of the upper left pixel location.
* @param y The Y coordinate of the upper left pixel location.
* @param w Width of the pixel rectangle.
* @param h Height of the pixel rectangle.
* @param iArray The input int pixel array.
*
* @throws NullPointerException if iArray is null.
* @throws ArrayIndexOutOfBoundsException if the coordinates are not
* in bounds, or if iArray is too small to hold the input.
*/
public void setPixels(int x, int y, int w, int h, int iArray[]) {
sampleModel.setPixels(x-sampleModelTranslateX,y-sampleModelTranslateY,
w,h,iArray,dataBuffer);
}
/**
* Sets all samples for a rectangle of pixels from a float array containing
* one sample per array element.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds.
* However, explicit bounds checking is not guaranteed.
* @param x The X coordinate of the upper left pixel location.
* @param y The Y coordinate of the upper left pixel location.
* @param w Width of the pixel rectangle.
* @param h Height of the pixel rectangle.
* @param fArray The input float pixel array.
*
* @throws NullPointerException if fArray is null.
* @throws ArrayIndexOutOfBoundsException if the coordinates are not
* in bounds, or if fArray is too small to hold the input.
*/
public void setPixels(int x, int y, int w, int h, float fArray[]) {
sampleModel.setPixels(x-sampleModelTranslateX,y-sampleModelTranslateY,
w,h,fArray,dataBuffer);
}
/**
* Sets all samples for a rectangle of pixels from a double array containing
* one sample per array element.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds.
* However, explicit bounds checking is not guaranteed.
* @param x The X coordinate of the upper left pixel location.
* @param y The Y coordinate of the upper left pixel location.
* @param w Width of the pixel rectangle.
* @param h Height of the pixel rectangle.
* @param dArray The input double pixel array.
*
* @throws NullPointerException if dArray is null.
* @throws ArrayIndexOutOfBoundsException if the coordinates are not
* in bounds, or if dArray is too small to hold the input.
*/
public void setPixels(int x, int y, int w, int h, double dArray[]) {
sampleModel.setPixels(x-sampleModelTranslateX,y-sampleModelTranslateY,
w,h,dArray,dataBuffer);
}
/**
* Sets a sample in the specified band for the pixel located at (x,y)
* in the DataBuffer using an int for input.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds.
* However, explicit bounds checking is not guaranteed.
* @param x The X coordinate of the pixel location.
* @param y The Y coordinate of the pixel location.
* @param b The band to set.
* @param s The input sample.
*
* @throws ArrayIndexOutOfBoundsException if the coordinates or
* the band index are not in bounds.
*/
public void setSample(int x, int y, int b, int s) {
sampleModel.setSample(x-sampleModelTranslateX,
y-sampleModelTranslateY, b, s,
dataBuffer);
}
/**
* Sets a sample in the specified band for the pixel located at (x,y)
* in the DataBuffer using a float for input.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds.
* However, explicit bounds checking is not guaranteed.
* @param x The X coordinate of the pixel location.
* @param y The Y coordinate of the pixel location.
* @param b The band to set.
* @param s The input sample as a float.
*
* @throws ArrayIndexOutOfBoundsException if the coordinates or
* the band index are not in bounds.
*/
public void setSample(int x, int y, int b, float s){
sampleModel.setSample(x-sampleModelTranslateX,y-sampleModelTranslateY,
b,s,dataBuffer);
}
/**
* Sets a sample in the specified band for the pixel located at (x,y)
* in the DataBuffer using a double for input.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds.
* However, explicit bounds checking is not guaranteed.
* @param x The X coordinate of the pixel location.
* @param y The Y coordinate of the pixel location.
* @param b The band to set.
* @param s The input sample as a double.
*
* @throws ArrayIndexOutOfBoundsException if the coordinates or
* the band index are not in bounds.
*/
public void setSample(int x, int y, int b, double s){
sampleModel.setSample(x-sampleModelTranslateX,y-sampleModelTranslateY,
b,s,dataBuffer);
}
/**
* Sets the samples in the specified band for the specified rectangle
* of pixels from an int array containing one sample per array element.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds.
* However, explicit bounds checking is not guaranteed.
* @param x The X coordinate of the upper left pixel location.
* @param y The Y coordinate of the upper left pixel location.
* @param w Width of the pixel rectangle.
* @param h Height of the pixel rectangle.
* @param b The band to set.
* @param iArray The input int sample array.
*
* @throws NullPointerException if iArray is null.
* @throws ArrayIndexOutOfBoundsException if the coordinates or
* the band index are not in bounds, or if iArray is too small to
* hold the input.
*/
public void setSamples(int x, int y, int w, int h, int b,
int iArray[]) {
sampleModel.setSamples(x-sampleModelTranslateX,y-sampleModelTranslateY,
w,h,b,iArray,dataBuffer);
}
/**
* Sets the samples in the specified band for the specified rectangle
* of pixels from a float array containing one sample per array element.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds.
* However, explicit bounds checking is not guaranteed.
* @param x The X coordinate of the upper left pixel location.
* @param y The Y coordinate of the upper left pixel location.
* @param w Width of the pixel rectangle.
* @param h Height of the pixel rectangle.
* @param b The band to set.
* @param fArray The input float sample array.
*
* @throws NullPointerException if fArray is null.
* @throws ArrayIndexOutOfBoundsException if the coordinates or
* the band index are not in bounds, or if fArray is too small to
* hold the input.
*/
public void setSamples(int x, int y, int w, int h, int b,
float fArray[]) {
sampleModel.setSamples(x-sampleModelTranslateX,y-sampleModelTranslateY,
w,h,b,fArray,dataBuffer);
}
/**
* Sets the samples in the specified band for the specified rectangle
* of pixels from a double array containing one sample per array element.
* An ArrayIndexOutOfBoundsException may be thrown if the coordinates are
* not in bounds.
* However, explicit bounds checking is not guaranteed.
* @param x The X coordinate of the upper left pixel location.
* @param y The Y coordinate of the upper left pixel location.
* @param w Width of the pixel rectangle.
* @param h Height of the pixel rectangle.
* @param b The band to set.
* @param dArray The input double sample array.
*
* @throws NullPointerException if dArray is null.
* @throws ArrayIndexOutOfBoundsException if the coordinates or
* the band index are not in bounds, or if dArray is too small to
* hold the input.
*/
public void setSamples(int x, int y, int w, int h, int b,
double dArray[]) {
sampleModel.setSamples(x-sampleModelTranslateX,y-sampleModelTranslateY,
w,h,b,dArray,dataBuffer);
}
}
Other Java examples (source code examples)
Here is a short list of links related to this Java WritableRaster.java source code file:
|
The search page
Other Java source code examples at this package level
Click here to learn more about this project
