|
Java example source code file (PushbackInputStream.java)
This example Java source code file (PushbackInputStream.java) is included in the alvinalexander.com
"Java Source Code
Warehouse" project. The intent of this project is to help you "Learn
Java by Example" TM.
Learn more about this Java project at its project page.
The PushbackInputStream.java Java example source code
/*
* Copyright (c) 1994, 2013, Oracle and/or its affiliates. All rights reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation. Oracle designates this
* particular file as subject to the "Classpath" exception as provided
* by Oracle in the LICENSE file that accompanied this code.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*/
package java.io;
/**
* A <code>PushbackInputStream adds
* functionality to another input stream, namely
* the ability to "push back" or "unread"
* one byte. This is useful in situations where
* it is convenient for a fragment of code
* to read an indefinite number of data bytes
* that are delimited by a particular byte
* value; after reading the terminating byte,
* the code fragment can "unread" it, so that
* the next read operation on the input stream
* will reread the byte that was pushed back.
* For example, bytes representing the characters
* constituting an identifier might be terminated
* by a byte representing an operator character;
* a method whose job is to read just an identifier
* can read until it sees the operator and
* then push the operator back to be re-read.
*
* @author David Connelly
* @author Jonathan Payne
* @since JDK1.0
*/
public
class PushbackInputStream extends FilterInputStream {
/**
* The pushback buffer.
* @since JDK1.1
*/
protected byte[] buf;
/**
* The position within the pushback buffer from which the next byte will
* be read. When the buffer is empty, <code>pos is equal to
* <code>buf.length; when the buffer is full, pos is
* equal to zero.
*
* @since JDK1.1
*/
protected int pos;
/**
* Check to make sure that this stream has not been closed
*/
private void ensureOpen() throws IOException {
if (in == null)
throw new IOException("Stream closed");
}
/**
* Creates a <code>PushbackInputStream
* with a pushback buffer of the specified <code>size,
* and saves its argument, the input stream
* <code>in, for later use. Initially,
* there is no pushed-back byte (the field
* <code>pushBack is initialized to
* <code>-1).
*
* @param in the input stream from which bytes will be read.
* @param size the size of the pushback buffer.
* @exception IllegalArgumentException if {@code size <= 0}
* @since JDK1.1
*/
public PushbackInputStream(InputStream in, int size) {
super(in);
if (size <= 0) {
throw new IllegalArgumentException("size <= 0");
}
this.buf = new byte[size];
this.pos = size;
}
/**
* Creates a <code>PushbackInputStream
* and saves its argument, the input stream
* <code>in, for later use. Initially,
* there is no pushed-back byte (the field
* <code>pushBack is initialized to
* <code>-1).
*
* @param in the input stream from which bytes will be read.
*/
public PushbackInputStream(InputStream in) {
this(in, 1);
}
/**
* Reads the next byte of data from this input stream. The value
* byte is returned as an <code>int in the range
* <code>0 to 255 . If no byte is available
* because the end of the stream has been reached, the value
* <code>-1 is returned. This method blocks until input data
* is available, the end of the stream is detected, or an exception
* is thrown.
*
* <p> This method returns the most recently pushed-back byte, if there is
* one, and otherwise calls the <code>read method of its underlying
* input stream and returns whatever value that method returns.
*
* @return the next byte of data, or <code>-1 if the end of the
* stream has been reached.
* @exception IOException if this input stream has been closed by
* invoking its {@link #close()} method,
* or an I/O error occurs.
* @see java.io.InputStream#read()
*/
public int read() throws IOException {
ensureOpen();
if (pos < buf.length) {
return buf[pos++] & 0xff;
}
return super.read();
}
/**
* Reads up to <code>len bytes of data from this input stream into
* an array of bytes. This method first reads any pushed-back bytes; after
* that, if fewer than <code>len bytes have been read then it
* reads from the underlying input stream. If <code>len is not zero, the method
* blocks until at least 1 byte of input is available; otherwise, no
* bytes are read and <code>0 is returned.
*
* @param b the buffer into which the data is read.
* @param off the start offset in the destination array <code>b
* @param len the maximum number of bytes read.
* @return the total number of bytes read into the buffer, or
* <code>-1 if there is no more data because the end of
* the stream has been reached.
* @exception NullPointerException If <code>b is null .
* @exception IndexOutOfBoundsException If <code>off is negative,
* <code>len is negative, or len is greater than
* <code>b.length - off
* @exception IOException if this input stream has been closed by
* invoking its {@link #close()} method,
* or an I/O error occurs.
* @see java.io.InputStream#read(byte[], int, int)
*/
public int read(byte[] b, int off, int len) throws IOException {
ensureOpen();
if (b == null) {
throw new NullPointerException();
} else if (off < 0 || len < 0 || len > b.length - off) {
throw new IndexOutOfBoundsException();
} else if (len == 0) {
return 0;
}
int avail = buf.length - pos;
if (avail > 0) {
if (len < avail) {
avail = len;
}
System.arraycopy(buf, pos, b, off, avail);
pos += avail;
off += avail;
len -= avail;
}
if (len > 0) {
len = super.read(b, off, len);
if (len == -1) {
return avail == 0 ? -1 : avail;
}
return avail + len;
}
return avail;
}
/**
* Pushes back a byte by copying it to the front of the pushback buffer.
* After this method returns, the next byte to be read will have the value
* <code>(byte)b.
*
* @param b the <code>int value whose low-order
* byte is to be pushed back.
* @exception IOException If there is not enough room in the pushback
* buffer for the byte, or this input stream has been closed by
* invoking its {@link #close()} method.
*/
public void unread(int b) throws IOException {
ensureOpen();
if (pos == 0) {
throw new IOException("Push back buffer is full");
}
buf[--pos] = (byte)b;
}
/**
* Pushes back a portion of an array of bytes by copying it to the front
* of the pushback buffer. After this method returns, the next byte to be
* read will have the value <code>b[off], the byte after that will
* have the value <code>b[off+1], and so forth.
*
* @param b the byte array to push back.
* @param off the start offset of the data.
* @param len the number of bytes to push back.
* @exception IOException If there is not enough room in the pushback
* buffer for the specified number of bytes,
* or this input stream has been closed by
* invoking its {@link #close()} method.
* @since JDK1.1
*/
public void unread(byte[] b, int off, int len) throws IOException {
ensureOpen();
if (len > pos) {
throw new IOException("Push back buffer is full");
}
pos -= len;
System.arraycopy(b, off, buf, pos, len);
}
/**
* Pushes back an array of bytes by copying it to the front of the
* pushback buffer. After this method returns, the next byte to be read
* will have the value <code>b[0], the byte after that will have the
* value <code>b[1], and so forth.
*
* @param b the byte array to push back
* @exception IOException If there is not enough room in the pushback
* buffer for the specified number of bytes,
* or this input stream has been closed by
* invoking its {@link #close()} method.
* @since JDK1.1
*/
public void unread(byte[] b) throws IOException {
unread(b, 0, b.length);
}
/**
* Returns an estimate of the number of bytes that can be read (or
* skipped over) from this input stream without blocking by the next
* invocation of a method for this input stream. The next invocation might be
* the same thread or another thread. A single read or skip of this
* many bytes will not block, but may read or skip fewer bytes.
*
* <p> The method returns the sum of the number of bytes that have been
* pushed back and the value returned by {@link
* java.io.FilterInputStream#available available}.
*
* @return the number of bytes that can be read (or skipped over) from
* the input stream without blocking.
* @exception IOException if this input stream has been closed by
* invoking its {@link #close()} method,
* or an I/O error occurs.
* @see java.io.FilterInputStream#in
* @see java.io.InputStream#available()
*/
public int available() throws IOException {
ensureOpen();
int n = buf.length - pos;
int avail = super.available();
return n > (Integer.MAX_VALUE - avail)
? Integer.MAX_VALUE
: n + avail;
}
/**
* Skips over and discards <code>n bytes of data from this
* input stream. The <code>skip method may, for a variety of
* reasons, end up skipping over some smaller number of bytes,
* possibly zero. If <code>n is negative, no bytes are skipped.
*
* <p> The skip method of PushbackInputStream
* first skips over the bytes in the pushback buffer, if any. It then
* calls the <code>skip method of the underlying input stream if
* more bytes need to be skipped. The actual number of bytes skipped
* is returned.
*
* @param n {@inheritDoc}
* @return {@inheritDoc}
* @exception IOException if the stream does not support seek,
* or the stream has been closed by
* invoking its {@link #close()} method,
* or an I/O error occurs.
* @see java.io.FilterInputStream#in
* @see java.io.InputStream#skip(long n)
* @since 1.2
*/
public long skip(long n) throws IOException {
ensureOpen();
if (n <= 0) {
return 0;
}
long pskip = buf.length - pos;
if (pskip > 0) {
if (n < pskip) {
pskip = n;
}
pos += pskip;
n -= pskip;
}
if (n > 0) {
pskip += super.skip(n);
}
return pskip;
}
/**
* Tests if this input stream supports the <code>mark and
* <code>reset methods, which it does not.
*
* @return <code>false, since this class does not support the
* <code>mark and reset methods.
* @see java.io.InputStream#mark(int)
* @see java.io.InputStream#reset()
*/
public boolean markSupported() {
return false;
}
/**
* Marks the current position in this input stream.
*
* <p> The mark method of PushbackInputStream
* does nothing.
*
* @param readlimit the maximum limit of bytes that can be read before
* the mark position becomes invalid.
* @see java.io.InputStream#reset()
*/
public synchronized void mark(int readlimit) {
}
/**
* Repositions this stream to the position at the time the
* <code>mark method was last called on this input stream.
*
* <p> The method reset for class
* <code>PushbackInputStream does nothing except throw an
* <code>IOException.
*
* @exception IOException if this method is invoked.
* @see java.io.InputStream#mark(int)
* @see java.io.IOException
*/
public synchronized void reset() throws IOException {
throw new IOException("mark/reset not supported");
}
/**
* Closes this input stream and releases any system resources
* associated with the stream.
* Once the stream has been closed, further read(), unread(),
* available(), reset(), or skip() invocations will throw an IOException.
* Closing a previously closed stream has no effect.
*
* @exception IOException if an I/O error occurs.
*/
public synchronized void close() throws IOException {
if (in == null)
return;
in.close();
in = null;
buf = null;
}
}
Other Java examples (source code examples)
Here is a short list of links related to this Java PushbackInputStream.java source code file:
|