|
|
Java example source code file (JSRInlinerAdapter.java)
This example Java source code file (JSRInlinerAdapter.java) is included in the alvinalexander.com
"Java Source Code
Warehouse" project. The intent of this project is to help you "Learn
Java by Example" TM.
Learn more about this Java project at its project page.
The JSRInlinerAdapter.java Java example source code
/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation. Oracle designates this
* particular file as subject to the "Classpath" exception as provided
* by Oracle in the LICENSE file that accompanied this code.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*/
/*
* This file is available under and governed by the GNU General Public
* License version 2 only, as published by the Free Software Foundation.
* However, the following notice accompanied the original version of this
* file:
*
* ASM: a very small and fast Java bytecode manipulation framework
* Copyright (c) 2000-2011 INRIA, France Telecom
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
package jdk.internal.org.objectweb.asm.commons;
import java.util.AbstractMap;
import java.util.ArrayList;
import java.util.BitSet;
import java.util.HashMap;
import java.util.Iterator;
import java.util.LinkedList;
import java.util.List;
import java.util.Map;
import java.util.Set;
import jdk.internal.org.objectweb.asm.Label;
import jdk.internal.org.objectweb.asm.MethodVisitor;
import jdk.internal.org.objectweb.asm.Opcodes;
import jdk.internal.org.objectweb.asm.Type;
import jdk.internal.org.objectweb.asm.tree.AbstractInsnNode;
import jdk.internal.org.objectweb.asm.tree.InsnList;
import jdk.internal.org.objectweb.asm.tree.InsnNode;
import jdk.internal.org.objectweb.asm.tree.JumpInsnNode;
import jdk.internal.org.objectweb.asm.tree.LabelNode;
import jdk.internal.org.objectweb.asm.tree.LocalVariableNode;
import jdk.internal.org.objectweb.asm.tree.LookupSwitchInsnNode;
import jdk.internal.org.objectweb.asm.tree.MethodNode;
import jdk.internal.org.objectweb.asm.tree.TableSwitchInsnNode;
import jdk.internal.org.objectweb.asm.tree.TryCatchBlockNode;
/**
* A {@link jdk.internal.org.objectweb.asm.MethodVisitor} that removes JSR instructions and
* inlines the referenced subroutines.
*
* <b>Explanation of how it works TODO
*
* @author Niko Matsakis
*/
public class JSRInlinerAdapter extends MethodNode implements Opcodes {
private static final boolean LOGGING = false;
/**
* For each label that is jumped to by a JSR, we create a BitSet instance.
*/
private final Map<LabelNode, BitSet> subroutineHeads = new HashMap();
/**
* This subroutine instance denotes the line of execution that is not
* contained within any subroutine; i.e., the "subroutine" that is executing
* when a method first begins.
*/
private final BitSet mainSubroutine = new BitSet();
/**
* This BitSet contains the index of every instruction that belongs to more
* than one subroutine. This should not happen often.
*/
final BitSet dualCitizens = new BitSet();
/**
* Creates a new JSRInliner. <i>Subclasses must not use this
* constructor</i>. Instead, they must use the
* {@link #JSRInlinerAdapter(int, MethodVisitor, int, String, String, String, String[])}
* version.
*
* @param mv
* the <code>MethodVisitor to send the resulting inlined
* method code to (use <code>null for none).
* @param access
* the method's access flags (see {@link Opcodes}). This
* parameter also indicates if the method is synthetic and/or
* deprecated.
* @param name
* the method's name.
* @param desc
* the method's descriptor (see {@link Type}).
* @param signature
* the method's signature. May be <tt>null.
* @param exceptions
* the internal names of the method's exception classes (see
* {@link Type#getInternalName() getInternalName}). May be
* <tt>null.
* @throws IllegalStateException
* If a subclass calls this constructor.
*/
public JSRInlinerAdapter(final MethodVisitor mv, final int access,
final String name, final String desc, final String signature,
final String[] exceptions) {
this(Opcodes.ASM5, mv, access, name, desc, signature, exceptions);
if (getClass() != JSRInlinerAdapter.class) {
throw new IllegalStateException();
}
}
/**
* Creates a new JSRInliner.
*
* @param api
* the ASM API version implemented by this visitor. Must be one
* of {@link Opcodes#ASM4} or {@link Opcodes#ASM5}.
* @param mv
* the <code>MethodVisitor to send the resulting inlined
* method code to (use <code>null for none).
* @param access
* the method's access flags (see {@link Opcodes}). This
* parameter also indicates if the method is synthetic and/or
* deprecated.
* @param name
* the method's name.
* @param desc
* the method's descriptor (see {@link Type}).
* @param signature
* the method's signature. May be <tt>null.
* @param exceptions
* the internal names of the method's exception classes (see
* {@link Type#getInternalName() getInternalName}). May be
* <tt>null.
*/
protected JSRInlinerAdapter(final int api, final MethodVisitor mv,
final int access, final String name, final String desc,
final String signature, final String[] exceptions) {
super(api, access, name, desc, signature, exceptions);
this.mv = mv;
}
/**
* Detects a JSR instruction and sets a flag to indicate we will need to do
* inlining.
*/
@Override
public void visitJumpInsn(final int opcode, final Label lbl) {
super.visitJumpInsn(opcode, lbl);
LabelNode ln = ((JumpInsnNode) instructions.getLast()).label;
if (opcode == JSR && !subroutineHeads.containsKey(ln)) {
subroutineHeads.put(ln, new BitSet());
}
}
/**
* If any JSRs were seen, triggers the inlining process. Otherwise, forwards
* the byte codes untouched.
*/
@Override
public void visitEnd() {
if (!subroutineHeads.isEmpty()) {
markSubroutines();
if (LOGGING) {
log(mainSubroutine.toString());
Iterator<BitSet> it = subroutineHeads.values().iterator();
while (it.hasNext()) {
BitSet sub = it.next();
log(sub.toString());
}
}
emitCode();
}
// Forward the translate opcodes on if appropriate:
if (mv != null) {
accept(mv);
}
}
/**
* Walks the method and determines which internal subroutine(s), if any,
* each instruction is a method of.
*/
private void markSubroutines() {
BitSet anyvisited = new BitSet();
// First walk the main subroutine and find all those instructions which
// can be reached without invoking any JSR at all
markSubroutineWalk(mainSubroutine, 0, anyvisited);
// Go through the head of each subroutine and find any nodes reachable
// to that subroutine without following any JSR links.
for (Iterator<Map.Entry it = subroutineHeads
.entrySet().iterator(); it.hasNext();) {
Map.Entry<LabelNode, BitSet> entry = it.next();
LabelNode lab = entry.getKey();
BitSet sub = entry.getValue();
int index = instructions.indexOf(lab);
markSubroutineWalk(sub, index, anyvisited);
}
}
/**
* Performs a depth first search walking the normal byte code path starting
* at <code>index, and adding each instruction encountered into the
* subroutine <code>sub. After this walk is complete, iterates over
* the exception handlers to ensure that we also include those byte codes
* which are reachable through an exception that may be thrown during the
* execution of the subroutine. Invoked from <code>markSubroutines().
*
* @param sub
* the subroutine whose instructions must be computed.
* @param index
* an instruction of this subroutine.
* @param anyvisited
* indexes of the already visited instructions, i.e. marked as
* part of this subroutine or any previously computed subroutine.
*/
private void markSubroutineWalk(final BitSet sub, final int index,
final BitSet anyvisited) {
if (LOGGING) {
log("markSubroutineWalk: sub=" + sub + " index=" + index);
}
// First find those instructions reachable via normal execution
markSubroutineWalkDFS(sub, index, anyvisited);
// Now, make sure we also include any applicable exception handlers
boolean loop = true;
while (loop) {
loop = false;
for (Iterator<TryCatchBlockNode> it = tryCatchBlocks.iterator(); it
.hasNext();) {
TryCatchBlockNode trycatch = it.next();
if (LOGGING) {
// TODO use of default toString().
log("Scanning try/catch " + trycatch);
}
// If the handler has already been processed, skip it.
int handlerindex = instructions.indexOf(trycatch.handler);
if (sub.get(handlerindex)) {
continue;
}
int startindex = instructions.indexOf(trycatch.start);
int endindex = instructions.indexOf(trycatch.end);
int nextbit = sub.nextSetBit(startindex);
if (nextbit != -1 && nextbit < endindex) {
if (LOGGING) {
log("Adding exception handler: " + startindex + '-'
+ endindex + " due to " + nextbit + " handler "
+ handlerindex);
}
markSubroutineWalkDFS(sub, handlerindex, anyvisited);
loop = true;
}
}
}
}
/**
* Performs a simple DFS of the instructions, assigning each to the
* subroutine <code>sub. Starts from index. Invoked only
* by <code>markSubroutineWalk().
*
* @param sub
* the subroutine whose instructions must be computed.
* @param index
* an instruction of this subroutine.
* @param anyvisited
* indexes of the already visited instructions, i.e. marked as
* part of this subroutine or any previously computed subroutine.
*/
private void markSubroutineWalkDFS(final BitSet sub, int index,
final BitSet anyvisited) {
while (true) {
AbstractInsnNode node = instructions.get(index);
// don't visit a node twice
if (sub.get(index)) {
return;
}
sub.set(index);
// check for those nodes already visited by another subroutine
if (anyvisited.get(index)) {
dualCitizens.set(index);
if (LOGGING) {
log("Instruction #" + index + " is dual citizen.");
}
}
anyvisited.set(index);
if (node.getType() == AbstractInsnNode.JUMP_INSN
&& node.getOpcode() != JSR) {
// we do not follow recursively called subroutines here; but any
// other sort of branch we do follow
JumpInsnNode jnode = (JumpInsnNode) node;
int destidx = instructions.indexOf(jnode.label);
markSubroutineWalkDFS(sub, destidx, anyvisited);
}
if (node.getType() == AbstractInsnNode.TABLESWITCH_INSN) {
TableSwitchInsnNode tsnode = (TableSwitchInsnNode) node;
int destidx = instructions.indexOf(tsnode.dflt);
markSubroutineWalkDFS(sub, destidx, anyvisited);
for (int i = tsnode.labels.size() - 1; i >= 0; --i) {
LabelNode l = tsnode.labels.get(i);
destidx = instructions.indexOf(l);
markSubroutineWalkDFS(sub, destidx, anyvisited);
}
}
if (node.getType() == AbstractInsnNode.LOOKUPSWITCH_INSN) {
LookupSwitchInsnNode lsnode = (LookupSwitchInsnNode) node;
int destidx = instructions.indexOf(lsnode.dflt);
markSubroutineWalkDFS(sub, destidx, anyvisited);
for (int i = lsnode.labels.size() - 1; i >= 0; --i) {
LabelNode l = lsnode.labels.get(i);
destidx = instructions.indexOf(l);
markSubroutineWalkDFS(sub, destidx, anyvisited);
}
}
// check to see if this opcode falls through to the next instruction
// or not; if not, return.
switch (instructions.get(index).getOpcode()) {
case GOTO:
case RET:
case TABLESWITCH:
case LOOKUPSWITCH:
case IRETURN:
case LRETURN:
case FRETURN:
case DRETURN:
case ARETURN:
case RETURN:
case ATHROW:
/*
* note: this either returns from this subroutine, or a parent
* subroutine which invoked it
*/
return;
}
// Use tail recursion here in the form of an outer while loop to
// avoid our stack growing needlessly:
index++;
// We implicitly assumed above that execution can always fall
// through to the next instruction after a JSR. But a subroutine may
// never return, in which case the code after the JSR is unreachable
// and can be anything. In particular, it can seem to fall off the
// end of the method, so we must handle this case here (we could
// instead detect whether execution can return or not from a JSR,
// but this is more complicated).
if (index >= instructions.size()) {
return;
}
}
}
/**
* Creates the new instructions, inlining each instantiation of each
* subroutine until the code is fully elaborated.
*/
private void emitCode() {
LinkedList<Instantiation> worklist = new LinkedList();
// Create an instantiation of the "root" subroutine, which is just the
// main routine
worklist.add(new Instantiation(null, mainSubroutine));
// Emit instantiations of each subroutine we encounter, including the
// main subroutine
InsnList newInstructions = new InsnList();
List<TryCatchBlockNode> newTryCatchBlocks = new ArrayList();
List<LocalVariableNode> newLocalVariables = new ArrayList();
while (!worklist.isEmpty()) {
Instantiation inst = worklist.removeFirst();
emitSubroutine(inst, worklist, newInstructions, newTryCatchBlocks,
newLocalVariables);
}
instructions = newInstructions;
tryCatchBlocks = newTryCatchBlocks;
localVariables = newLocalVariables;
}
/**
* Emits one instantiation of one subroutine, specified by
* <code>instant. May add new instantiations that are invoked by this
* one to the <code>worklist parameter, and new try/catch blocks to
* <code>newTryCatchBlocks.
*
* @param instant
* the instantiation that must be performed.
* @param worklist
* list of the instantiations that remain to be done.
* @param newInstructions
* the instruction list to which the instantiated code must be
* appended.
* @param newTryCatchBlocks
* the exception handler list to which the instantiated handlers
* must be appended.
*/
private void emitSubroutine(final Instantiation instant,
final List<Instantiation> worklist, final InsnList newInstructions,
final List<TryCatchBlockNode> newTryCatchBlocks,
final List<LocalVariableNode> newLocalVariables) {
LabelNode duplbl = null;
if (LOGGING) {
log("--------------------------------------------------------");
log("Emitting instantiation of subroutine " + instant.subroutine);
}
// Emit the relevant instructions for this instantiation, translating
// labels and jump targets as we go:
for (int i = 0, c = instructions.size(); i < c; i++) {
AbstractInsnNode insn = instructions.get(i);
Instantiation owner = instant.findOwner(i);
// Always remap labels:
if (insn.getType() == AbstractInsnNode.LABEL) {
// Translate labels into their renamed equivalents.
// Avoid adding the same label more than once. Note
// that because we own this instruction the gotoTable
// and the rangeTable will always agree.
LabelNode ilbl = (LabelNode) insn;
LabelNode remap = instant.rangeLabel(ilbl);
if (LOGGING) {
// TODO use of default toString().
log("Translating lbl #" + i + ':' + ilbl + " to " + remap);
}
if (remap != duplbl) {
newInstructions.add(remap);
duplbl = remap;
}
continue;
}
// We don't want to emit instructions that were already
// emitted by a subroutine higher on the stack. Note that
// it is still possible for a given instruction to be
// emitted twice because it may belong to two subroutines
// that do not invoke each other.
if (owner != instant) {
continue;
}
if (LOGGING) {
log("Emitting inst #" + i);
}
if (insn.getOpcode() == RET) {
// Translate RET instruction(s) to a jump to the return label
// for the appropriate instantiation. The problem is that the
// subroutine may "fall through" to the ret of a parent
// subroutine; therefore, to find the appropriate ret label we
// find the lowest subroutine on the stack that claims to own
// this instruction. See the class javadoc comment for an
// explanation on why this technique is safe (note: it is only
// safe if the input is verifiable).
LabelNode retlabel = null;
for (Instantiation p = instant; p != null; p = p.previous) {
if (p.subroutine.get(i)) {
retlabel = p.returnLabel;
}
}
if (retlabel == null) {
// This is only possible if the mainSubroutine owns a RET
// instruction, which should never happen for verifiable
// code.
throw new RuntimeException("Instruction #" + i
+ " is a RET not owned by any subroutine");
}
newInstructions.add(new JumpInsnNode(GOTO, retlabel));
} else if (insn.getOpcode() == JSR) {
LabelNode lbl = ((JumpInsnNode) insn).label;
BitSet sub = subroutineHeads.get(lbl);
Instantiation newinst = new Instantiation(instant, sub);
LabelNode startlbl = newinst.gotoLabel(lbl);
if (LOGGING) {
log(" Creating instantiation of subr " + sub);
}
// Rather than JSRing, we will jump to the inline version and
// push NULL for what was once the return value. This hack
// allows us to avoid doing any sort of data flow analysis to
// figure out which instructions manipulate the old return value
// pointer which is now known to be unneeded.
newInstructions.add(new InsnNode(ACONST_NULL));
newInstructions.add(new JumpInsnNode(GOTO, startlbl));
newInstructions.add(newinst.returnLabel);
// Insert this new instantiation into the queue to be emitted
// later.
worklist.add(newinst);
} else {
newInstructions.add(insn.clone(instant));
}
}
// Emit try/catch blocks that are relevant to this method.
for (Iterator<TryCatchBlockNode> it = tryCatchBlocks.iterator(); it
.hasNext();) {
TryCatchBlockNode trycatch = it.next();
if (LOGGING) {
// TODO use of default toString().
log("try catch block original labels=" + trycatch.start + '-'
+ trycatch.end + "->" + trycatch.handler);
}
final LabelNode start = instant.rangeLabel(trycatch.start);
final LabelNode end = instant.rangeLabel(trycatch.end);
// Ignore empty try/catch regions
if (start == end) {
if (LOGGING) {
log(" try catch block empty in this subroutine");
}
continue;
}
final LabelNode handler = instant.gotoLabel(trycatch.handler);
if (LOGGING) {
// TODO use of default toString().
log(" try catch block new labels=" + start + '-' + end + "->"
+ handler);
}
if (start == null || end == null || handler == null) {
throw new RuntimeException("Internal error!");
}
newTryCatchBlocks.add(new TryCatchBlockNode(start, end, handler,
trycatch.type));
}
for (Iterator<LocalVariableNode> it = localVariables.iterator(); it
.hasNext();) {
LocalVariableNode lvnode = it.next();
if (LOGGING) {
log("local var " + lvnode.name);
}
final LabelNode start = instant.rangeLabel(lvnode.start);
final LabelNode end = instant.rangeLabel(lvnode.end);
if (start == end) {
if (LOGGING) {
log(" local variable empty in this sub");
}
continue;
}
newLocalVariables.add(new LocalVariableNode(lvnode.name,
lvnode.desc, lvnode.signature, start, end, lvnode.index));
}
}
private static void log(final String str) {
System.err.println(str);
}
/**
* A class that represents an instantiation of a subroutine. Each
* instantiation has an associate "stack" --- which is a listing of those
* instantiations that were active when this particular instance of this
* subroutine was invoked. Each instantiation also has a map from the
* original labels of the program to the labels appropriate for this
* instantiation, and finally a label to return to.
*/
private class Instantiation extends AbstractMap<LabelNode, LabelNode> {
/**
* Previous instantiations; the stack must be statically predictable to
* be inlinable.
*/
final Instantiation previous;
/**
* The subroutine this is an instantiation of.
*/
public final BitSet subroutine;
/**
* This table maps Labels from the original source to Labels pointing at
* code specific to this instantiation, for use in remapping try/catch
* blocks,as well as gotos.
*
* Note that in the presence of dual citizens instructions, that is,
* instructions which belong to more than one subroutine due to the
* merging of control flow without a RET instruction, we will map the
* target label of a GOTO to the label used by the instantiation lowest
* on the stack. This avoids code duplication during inlining in most
* cases.
*
* @see #findOwner(int)
*/
public final Map<LabelNode, LabelNode> rangeTable = new HashMap();
/**
* All returns for this instantiation will be mapped to this label
*/
public final LabelNode returnLabel;
Instantiation(final Instantiation prev, final BitSet sub) {
previous = prev;
subroutine = sub;
for (Instantiation p = prev; p != null; p = p.previous) {
if (p.subroutine == sub) {
throw new RuntimeException("Recursive invocation of " + sub);
}
}
// Determine the label to return to when this subroutine terminates
// via RET: note that the main subroutine never terminates via RET.
if (prev != null) {
returnLabel = new LabelNode();
} else {
returnLabel = null;
}
// Each instantiation will remap the labels from the code above to
// refer to its particular copy of its own instructions. Note that
// we collapse labels which point at the same instruction into one:
// this is fairly common as we are often ignoring large chunks of
// instructions, so what were previously distinct labels become
// duplicates.
LabelNode duplbl = null;
for (int i = 0, c = instructions.size(); i < c; i++) {
AbstractInsnNode insn = instructions.get(i);
if (insn.getType() == AbstractInsnNode.LABEL) {
LabelNode ilbl = (LabelNode) insn;
if (duplbl == null) {
// if we already have a label pointing at this spot,
// don't recreate it.
duplbl = new LabelNode();
}
// Add an entry in the rangeTable for every label
// in the original code which points at the next
// instruction of our own to be emitted.
rangeTable.put(ilbl, duplbl);
} else if (findOwner(i) == this) {
// We will emit this instruction, so clear the 'duplbl' flag
// since the next Label will refer to a distinct
// instruction.
duplbl = null;
}
}
}
/**
* Returns the "owner" of a particular instruction relative to this
* instantiation: the owner referes to the Instantiation which will emit
* the version of this instruction that we will execute.
*
* Typically, the return value is either <code>this or
* <code>null. this indicates that this
* instantiation will generate the version of this instruction that we
* will execute, and <code>null indicates that this instantiation
* never executes the given instruction.
*
* Sometimes, however, an instruction can belong to multiple
* subroutines; this is called a "dual citizen" instruction (though it
* may belong to more than 2 subroutines), and occurs when multiple
* subroutines branch to common points of control. In this case, the
* owner is the subroutine that appears lowest on the stack, and which
* also owns the instruction in question.
*
* @param i
* the index of the instruction in the original code
* @return the "owner" of a particular instruction relative to this
* instantiation.
*/
public Instantiation findOwner(final int i) {
if (!subroutine.get(i)) {
return null;
}
if (!dualCitizens.get(i)) {
return this;
}
Instantiation own = this;
for (Instantiation p = previous; p != null; p = p.previous) {
if (p.subroutine.get(i)) {
own = p;
}
}
return own;
}
/**
* Looks up the label <code>l in the gotoTable, thus
* translating it from a Label in the original code, to a Label in the
* inlined code that is appropriate for use by an instruction that
* branched to the original label.
*
* @param l
* The label we will be translating
* @return a label for use by a branch instruction in the inlined code
* @see #rangeLabel
*/
public LabelNode gotoLabel(final LabelNode l) {
// owner should never be null, because owner is only null
// if an instruction cannot be reached from this subroutine
Instantiation owner = findOwner(instructions.indexOf(l));
return owner.rangeTable.get(l);
}
/**
* Looks up the label <code>l in the rangeTable,
* thus translating it from a Label in the original code, to a Label in
* the inlined code that is appropriate for use by an try/catch or
* variable use annotation.
*
* @param l
* The label we will be translating
* @return a label for use by a try/catch or variable annotation in the
* original code
* @see #rangeTable
*/
public LabelNode rangeLabel(final LabelNode l) {
return rangeTable.get(l);
}
// AbstractMap implementation
@Override
public Set<Map.Entry entrySet() {
return null;
}
@Override
public LabelNode get(final Object o) {
return gotoLabel((LabelNode) o);
}
}
}
Other Java examples (source code examples)
Here is a short list of links related to this Java JSRInlinerAdapter.java source code file:
|
The search page
Other Java source code examples at this package level
Click here to learn more about this project
