Java example source code file (TestDialogTypeAhead.java)
The TestDialogTypeAhead.java Java example source code/*
* Copyright (c) 2003, 2007, Oracle and/or its affiliates. All rights reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*/
/*
test
@bug 4799136
@summary Tests that type-ahead for dialog works and doesn't block program
@author area=awt.focus
@run applet TestDialogTypeAhead.html
*/
// Note there is no @ in front of test above. This is so that the
// harness will not mistake this file as a test file. It should
// only see the html file as a test file. (the harness runs all
// valid test files, so it would run this test twice if this file
// were valid as well as the html file.)
// Also, note the area= after Your Name in the author tag. Here, you
// should put which functional area the test falls in. See the
// AWT-core home page -> test areas and/or -> AWT team for a list of
// areas.
// Note also the 'TestDialogTypeAhead.html' in the run tag. This should
// be changed to the name of the test.
/**
* TestDialogTypeAhead.java
*
* summary:
*/
import java.applet.Applet;
import java.awt.*;
import java.awt.event.*;
import java.lang.reflect.InvocationTargetException;
import test.java.awt.regtesthelpers.Util;
//Automated tests should run as applet tests if possible because they
// get their environments cleaned up, including AWT threads, any
// test created threads, and any system resources used by the test
// such as file descriptors. (This is normally not a problem as
// main tests usually run in a separate VM, however on some platforms
// such as the Mac, separate VMs are not possible and non-applet
// tests will cause problems). Also, you don't have to worry about
// synchronisation stuff in Applet tests they way you do in main
// tests...
public class TestDialogTypeAhead extends Applet
{
//Declare things used in the test, like buttons and labels here
static Frame f;
static Button b;
static Dialog d;
static Button ok;
static Semaphore pressSema = new Semaphore();
static Semaphore robotSema = new Semaphore();
static volatile boolean gotFocus = false;
static Robot robot;
public void init()
{
//Create instructions for the user here, as well as set up
// the environment -- set the layout manager, add buttons,
// etc.
Toolkit.getDefaultToolkit().addAWTEventListener(new AWTEventListener() {
public void eventDispatched(AWTEvent e) {
System.err.println(e.toString());
}
}, AWTEvent.KEY_EVENT_MASK);
KeyboardFocusManager.setCurrentKeyboardFocusManager(new TestKFM());
this.setLayout (new BorderLayout ());
f = new Frame("frame");
b = new Button("press");
d = new Dialog(f, "dialog", true);
ok = new Button("ok");
d.add(ok);
d.pack();
ok.addKeyListener(new KeyAdapter() {
public void keyPressed(KeyEvent e) {
System.err.println("OK pressed");
d.dispose();
f.dispose();
// Typed-ahead key events should only be accepted if
// they arrive after FOCUS_GAINED
if (gotFocus) {
pressSema.raise();
}
}
});
ok.addFocusListener(new FocusAdapter() {
public void focusGained(FocusEvent e) {
gotFocus = true;
System.err.println("Ok got focus");
}
});
f.add(b);
f.pack();
b.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
System.err.println("B pressed");
EventQueue.invokeLater(new Runnable() {
public void run() {
waitTillShown(d);
TestDialogTypeAhead.this.d.toFront();
TestDialogTypeAhead.this.moveMouseOver(d);
}
});
d.setVisible(true);
}
});
}//End init()
public void start ()
{
//Get things going. Request focus, set size, et cetera
setSize (200,200);
setVisible(true);
validate();
try {
robot = new Robot();
} catch (Exception e) {
throw new RuntimeException("Can't create robot:" + e);
}
f.setVisible(true);
waitTillShown(b);
System.err.println("b is shown");
f.toFront();
moveMouseOver(f);
waitForIdle();
makeFocused(b);
waitForIdle();
System.err.println("b is focused");
robot.keyPress(KeyEvent.VK_SPACE);
robot.keyRelease(KeyEvent.VK_SPACE);
try {
robotSema.doWait(1000);
} catch (InterruptedException ie) {
throw new RuntimeException("Interrupted!");
}
if (!robotSema.getState()) {
throw new RuntimeException("robotSema hasn't been triggered");
}
System.err.println("typing ahead");
robot.keyPress(KeyEvent.VK_SPACE);
robot.keyRelease(KeyEvent.VK_SPACE);
waitForIdle();
try {
pressSema.doWait(3000);
} catch (InterruptedException ie) {
throw new RuntimeException("Interrupted!");
}
if (!pressSema.getState()) {
throw new RuntimeException("Type-ahead doesn't work");
}
}// start()
private void moveMouseOver(Container c) {
Point p = c.getLocationOnScreen();
Dimension d = c.getSize();
robot.mouseMove(p.x + (int)(d.getWidth()/2), p.y + (int)(d.getHeight()/2));
}
private void waitForIdle() {
try {
Toolkit.getDefaultToolkit().sync();
sun.awt.SunToolkit.flushPendingEvents();
EventQueue.invokeAndWait( new Runnable() {
public void run() {
// dummy implementation
}
} );
} catch(InterruptedException ite) {
System.err.println("Robot.waitForIdle, non-fatal exception caught:");
ite.printStackTrace();
} catch(InvocationTargetException ine) {
System.err.println("Robot.waitForIdle, non-fatal exception caught:");
ine.printStackTrace();
}
}
private void waitTillShown(Component c) {
while (true) {
try {
Thread.sleep(100);
c.getLocationOnScreen();
break;
} catch (InterruptedException ie) {
ie.printStackTrace();
break;
} catch (Exception e) {
}
}
}
private void makeFocused(Component comp) {
if (comp.isFocusOwner()) {
return;
}
final Semaphore sema = new Semaphore();
final FocusAdapter fa = new FocusAdapter() {
public void focusGained(FocusEvent fe) {
sema.raise();
}
};
comp.addFocusListener(fa);
comp.requestFocusInWindow();
if (comp.isFocusOwner()) {
return;
}
try {
sema.doWait(3000);
} catch (InterruptedException ie) {
ie.printStackTrace();
}
comp.removeFocusListener(fa);
if (!comp.isFocusOwner()) {
throw new RuntimeException("Can't make " + comp + " focused, current owner is " + KeyboardFocusManager.getCurrentKeyboardFocusManager().getFocusOwner());
}
}
static class Semaphore {
boolean state = false;
int waiting = 0;
public Semaphore() {
}
public synchronized void doWait() throws InterruptedException {
if (state) {
return;
}
waiting++;
wait();
waiting--;
}
public synchronized void doWait(int timeout) throws InterruptedException {
if (state) {
return;
}
waiting++;
wait(timeout);
waiting--;
}
public synchronized void raise() {
state = true;
if (waiting > 0) {
notifyAll();
}
}
public synchronized boolean getState() {
return state;
}
}
class TestKFM extends DefaultKeyboardFocusManager {
protected synchronized void enqueueKeyEvents(long after,
Component untilFocused)
{
super.enqueueKeyEvents(after, untilFocused);
if (untilFocused == TestDialogTypeAhead.this.ok) {
TestDialogTypeAhead.this.robotSema.raise();
}
}
}
}// class TestDialogTypeAhead
/****************************************************
Standard Test Machinery
DO NOT modify anything below -- it's a standard
chunk of code whose purpose is to make user
interaction uniform, and thereby make it simpler
to read and understand someone else's test.
****************************************************/
/**
This is part of the standard test machinery.
It creates a dialog (with the instructions), and is the interface
for sending text messages to the user.
To print the instructions, send an array of strings to Sysout.createDialog
WithInstructions method. Put one line of instructions per array entry.
To display a message for the tester to see, simply call Sysout.println
with the string to be displayed.
This mimics System.out.println but works within the test harness as well
as standalone.
*/
class Sysout
{
private static TestDialog dialog;
public static void createDialogWithInstructions( String[] instructions )
{
dialog = new TestDialog( new Frame(), "Instructions" );
dialog.printInstructions( instructions );
dialog.setVisible(true);
println( "Any messages for the tester will display here." );
}
public static void createDialog( )
{
dialog = new TestDialog( new Frame(), "Instructions" );
String[] defInstr = { "Instructions will appear here. ", "" } ;
dialog.printInstructions( defInstr );
dialog.setVisible(true);
println( "Any messages for the tester will display here." );
}
public static void printInstructions( String[] instructions )
{
dialog.printInstructions( instructions );
}
public static void println( String messageIn )
{
dialog.displayMessage( messageIn );
}
}// Sysout class
/**
This is part of the standard test machinery. It provides a place for the
test instructions to be displayed, and a place for interactive messages
to the user to be displayed.
To have the test instructions displayed, see Sysout.
To have a message to the user be displayed, see Sysout.
Do not call anything in this dialog directly.
*/
class TestDialog extends Dialog
{
TextArea instructionsText;
TextArea messageText;
int maxStringLength = 80;
//DO NOT call this directly, go through Sysout
public TestDialog( Frame frame, String name )
{
super( frame, name );
int scrollBoth = TextArea.SCROLLBARS_BOTH;
instructionsText = new TextArea( "", 15, maxStringLength, scrollBoth );
add( "North", instructionsText );
messageText = new TextArea( "", 5, maxStringLength, scrollBoth );
add("Center", messageText);
pack();
show();
}// TestDialog()
//DO NOT call this directly, go through Sysout
public void printInstructions( String[] instructions )
{
//Clear out any current instructions
instructionsText.setText( "" );
//Go down array of instruction strings
String printStr, remainingStr;
for( int i=0; i < instructions.length; i++ )
{
//chop up each into pieces maxSringLength long
remainingStr = instructions[ i ];
while( remainingStr.length() > 0 )
{
//if longer than max then chop off first max chars to print
if( remainingStr.length() >= maxStringLength )
{
//Try to chop on a word boundary
int posOfSpace = remainingStr.
lastIndexOf( ' ', maxStringLength - 1 );
if( posOfSpace <= 0 ) posOfSpace = maxStringLength - 1;
printStr = remainingStr.substring( 0, posOfSpace + 1 );
remainingStr = remainingStr.substring( posOfSpace + 1 );
}
//else just print
else
{
printStr = remainingStr;
remainingStr = "";
}
instructionsText.append( printStr + "\n" );
}// while
}// for
}//printInstructions()
//DO NOT call this directly, go through Sysout
public void displayMessage( String messageIn )
{
messageText.append( messageIn + "\n" );
System.out.println(messageIn);
}
}// TestDialog class
Other Java examples (source code examples)Here is a short list of links related to this Java TestDialogTypeAhead.java source code file: |
The search page
Other Java source code examples at this package level
Click here to learn more about this project
