Akka/Scala example source code file (message-delivery-reliability.rst)
The message-delivery-reliability.rst Akka example source code.. _message-delivery-reliability:
############################
Message Delivery Reliability
############################
Akka helps you build reliable applications which make use of multiple processor
cores in one machine (“scaling up”) or distributed across a computer network
(“scaling out”). The key abstraction to make this work is that all interactions
between your code units—actors—happen via message passing, which is why the
precise semantics of how messages are passed between actors deserve their own
chapter.
In order to give some context to the discussion below, consider an application
which spans multiple network hosts. The basic mechanism for communication is
the same whether sending to an actor on the local JVM or to a remote actor, but
of course there will be observable differences in the latency of delivery
(possibly also depending on the bandwidth of the network link and the message
size) and the reliability. In case of a remote message send there are obviously
more steps involved which means that more can go wrong. Another aspect is that
local sending will just pass a reference to the message inside the same JVM,
without any restrictions on the underlying object which is sent, whereas a
remote transport will place a limit on the message size.
Writing your actors such that every interaction could possibly be remote is the
safe, pessimistic bet. It means to only rely on those properties which are
always guaranteed and which are discussed in detail below. This has of course
some overhead in the actor’s implementation. If you are willing to sacrifice full
location transparency—for example in case of a group of closely collaborating
actors—you can place them always on the same JVM and enjoy stricter guarantees
on message delivery. The details of this trade-off are discussed further below.
As a supplementary part we give a few pointers at how to build stronger
reliability on top of the built-in ones. The chapter closes by discussing the
role of the “Dead Letter Office”.
The General Rules
=================
These are the rules for message sends (i.e. the ``tell`` or ``!`` method, which
also underlies the ``ask`` pattern):
* **at-most-once delivery**, i.e. no guaranteed delivery
* **message ordering per sender–receiver pair**
The first rule is typically found also in other actor implementations while the
second is specific to Akka.
Discussion: What does “at-most-once” mean?
------------------------------------------
When it comes to describing the semantics of a delivery mechanism, there are
three basic categories:
* **at-most-once** delivery means that for each message handed to the
mechanism, that message is delivered zero or one times; in more casual terms
it means that messages may be lost.
* **at-least-once** delivery means that for each message handed to the
mechanism potentially multiple attempts are made at delivering it, such that
at least one succeeds; again, in more casual terms this means that messages
may be duplicated but not lost.
* **exactly-once** delivery means that for each message handed to the mechanism
exactly one delivery is made to the recipient; the message can neither be
lost nor duplicated.
The first one is the cheapest—highest performance, least implementation
overhead—because it can be done in a fire-and-forget fashion without keeping
state at the sending end or in the transport mechanism. The second one requires
retries to counter transport losses, which means keeping state at the sending
end and having an acknowledgement mechanism at the receiving end. The third is
most expensive—and has consequently worst performance—because in addition to
the second it requires state to be kept at the receiving end in order to filter
out duplicate deliveries.
Discussion: Why No Guaranteed Delivery?
---------------------------------------
At the core of the problem lies the question what exactly this guarantee shall
mean:
1. The message is sent out on the network?
2. The message is received by the other host?
3. The message is put into the target actor's mailbox?
4. The message is starting to be processed by the target actor?
5. The message is processed successfully by the target actor?
Each one of these have different challenges and costs, and it is obvious that
there are conditions under which any message passing library would be unable to
comply; think for example about configurable mailbox types and how a bounded
mailbox would interact with the third point, or even what it would mean to
decide upon the “successfully” part of point five.
Along those same lines goes the reasoning in `Nobody Needs Reliable
Messaging`_. The only meaningful way for a sender to know whether an
interaction was successful is by receiving a business-level acknowledgement
message, which is not something Akka could make up on its own (neither are we
writing a “do what I mean” framework nor would you want us to).
Akka embraces distributed computing and makes the fallibility of communication
explicit through message passing, therefore it does not try to lie and emulate
a leaky abstraction. This is a model that has been used with great success in
Erlang and requires the users to design their applications around it. You can
read more about this approach in the `Erlang documentation`_ (section 10.9 and
10.10), Akka follows it closely.
Another angle on this issue is that by providing only basic guarantees those
use cases which do not need stronger reliability do not pay the cost of their
implementation; it is always possible to add stronger reliability on top of
basic ones, but it is not possible to retro-actively remove reliability in order
to gain more performance.
.. _message-ordering:
Discussion: Message Ordering
----------------------------
The rule more specifically is that *for a given pair of actors, messages sent
from the first to the second will not be received out-of-order.* This is
illustrated in the following:
Actor ``A1`` sends messages ``M1``, ``M2``, ``M3`` to ``A2``
Actor ``A3`` sends messages ``M4``, ``M5``, ``M6`` to ``A2``
This means that:
1) If ``M1`` is delivered it must be delivered before ``M2`` and ``M3``
2) If ``M2`` is delivered it must be delivered before ``M3``
3) If ``M4`` is delivered it must be delivered before ``M5`` and ``M6``
4) If ``M5`` is delivered it must be delivered before ``M6``
5) ``A2`` can see messages from ``A1`` interleaved with messages from ``A3``
6) Since there is no guaranteed delivery, any of the messages may be dropped, i.e. not arrive at ``A2``
.. note::
It is important to note that Akka’s guarantee applies to the order in which
messages are enqueued into the recipient’s mailbox. If the mailbox
implementation does not respect FIFO order (e.g. a :class:`PriorityMailbox`),
then the order of processing by the actor can deviate from the enqueueing
order.
Please note that this rule is **not transitive**:
Actor ``A`` sends message ``M1`` to actor ``C``
Actor ``A`` then sends message ``M2`` to actor ``B``
Actor ``B`` forwards message ``M2`` to actor ``C``
Actor ``C`` may receive ``M1`` and ``M2`` in any order
Causal transitive ordering would imply that ``M2`` is never received before
``M1`` at actor ``C`` (though any of them might be lost). This ordering can be
violated due to different message delivery latencies when ``A``, ``B`` and
``C`` reside on different network hosts, see more below.
.. note::
Actor creation is treated as a message sent from the parent to the child,
with the same semantics as discussed above. Sending a message to an actor in
a way which could be reordered with this initial creation message means that
the message might not arrive because the actor does not exist yet. An example
where the message might arrive too early would be to create a remote-deployed
actor R1, send its reference to another remote actor R2 and have R2 send a
message to R1. An example of well-defined ordering is a parent which creates
an actor and immediately sends a message to it.
Communication of failure
........................
Please note, that the ordering guarantees discussed above only hold for user messages between actors. Failure of a child
of an actor is communicated by special system messages that are not ordered relative to ordinary user messages. In
particular:
Child actor ``C`` sends message ``M`` to its parent ``P``
Child actor fails with failure ``F``
Parent actor ``P`` might receive the two events either in order ``M``, ``F`` or ``F``, ``M``
The reason for this is that internal system messages has their own mailboxes therefore the ordering of enqueue calls of
a user and system message cannot guarantee the ordering of their dequeue times.
The Rules for In-JVM (Local) Message Sends
==========================================
Be careful what you do with this section!
-----------------------------------------
Relying on the stronger reliability in this section is not recommended since it
will bind your application to local-only deployment: an application may have to
be designed differently (as opposed to just employing some message exchange
patterns local to some actors) in order to be fit for running on a cluster of
machines. Our credo is “design once, deploy any way you wish”, and to achieve
this you should only rely on `The General Rules`_.
Reliability of Local Message Sends
----------------------------------
The Akka test suite relies on not losing messages in the local context (and for
non-error condition tests also for remote deployment), meaning that we
actually do apply the best effort to keep our tests stable. A local ``tell``
operation can however fail for the same reasons as a normal method call can on
the JVM:
- :class:`StackOverflowError`
- :class:`OutOfMemoryError`
- other :class:`VirtualMachineError`
In addition, local sends can fail in Akka-specific ways:
- if the mailbox does not accept the message (e.g. full BoundedMailbox)
- if the receiving actor fails while processing the message or is already
terminated
While the first is clearly a matter of configuration the second deserves some
thought: the sender of a message does not get feedback if there was an
exception while processing, that notification goes to the supervisor instead.
This is in general not distinguishable from a lost message for an outside
observer.
Ordering of Local Message Sends
-------------------------------
Assuming strict FIFO mailboxes the abovementioned caveat of non-transitivity of
the message ordering guarantee is eliminated under certain conditions. As you
will note, these are quite subtle as it stands, and it is even possible that
future performance optimizations will invalidate this whole paragraph. The
possibly non-exhaustive list of counter-indications is:
- Before receiving the first reply from a top-level actor, there is a lock
which protects an internal interim queue, and this lock is not fair; the
implication is that enqueue requests from different senders which arrive
during the actor’s construction (figuratively, the details are more involved)
may be reordered depending on low-level thread scheduling. Since completely
fair locks do not exist on the JVM this is unfixable.
- The same mechanism is used during the construction of a Router, more
precisely the routed ActorRef, hence the same problem exists for actors
deployed with Routers.
- As mentioned above, the problem occurs anywhere a lock is involved during
enqueueing, which may also apply to custom mailboxes.
This list has been compiled carefully, but other problematic scenarios may have
escaped our analysis.
How does Local Ordering relate to Network Ordering
--------------------------------------------------
As explained in the previous paragraph local message sends obey transitive
causal ordering under certain conditions. If the remote message transport would
respect this ordering as well, that would translate to transitive causal
ordering across one network link, i.e. if exactly two network hosts are
involved. Involving multiple links, e.g. the three actors on three different
nodes mentioned above, then no guarantees can be made.
The current remote transport does **not** support this (again this is caused by
non-FIFO wake-up order of a lock, this time serializing connection
establishment).
As a speculative view into the future it might be possible to support this
ordering guarantee by re-implementing the remote transport layer based
completely on actors; at the same time we are looking into providing other
low-level transport protocols like UDP or SCTP which would enable higher
throughput or lower latency by removing this guarantee again, which would mean
that choosing between different implementations would allow trading guarantees
versus performance.
Higher-level abstractions
=========================
Based on a small and consistent tool set in Akka's core, Akka also provides
powerful, higher-level abstractions on top it.
Messaging Patterns
------------------
As discussed above a straight-forward answer to the requirement of reliable
delivery is an explicit ACK–RETRY protocol. In its simplest form this requires
- a way to identify individual messages to correlate message with
acknowledgement
- a retry mechanism which will resend messages if not acknowledged in time
- a way for the receiver to detect and discard duplicates
The third becomes necessary by virtue of the acknowledgements not being guaranteed
to arrive either. An ACK-RETRY protocol with business-level acknowledgements is
supported by :ref:`at-least-once-delivery` of the Akka Persistence module. Duplicates can be
detected by tracking the identifiers of messages sent via :ref:`at-least-once-delivery`.
Another way of implementing the third part would be to make processing the messages
idempotent on the level of the business logic.
Another example of implementing all three requirements is shown at
:ref:`reliable-proxy` (which is now superseded by :ref:`at-least-once-delivery`).
Event Sourcing
--------------
Event sourcing (and sharding) is what makes large websites scale to
billions of users, and the idea is quite simple: when a component (think actor)
processes a command it will generate a list of events representing the effect
of the command. These events are stored in addition to being applied to the
component’s state. The nice thing about this scheme is that events only ever
are appended to the storage, nothing is ever mutated; this enables perfect
replication and scaling of consumers of this event stream (i.e. other
components may consume the event stream as a means to replicate the component’s
state on a different continent or to react to changes). If the component’s
state is lost—due to a machine failure or by being pushed out of a cache—it can
easily be reconstructed by replaying the event stream (usually employing
snapshots to speed up the process). :ref:`event-sourcing` is supported by
Akka Persistence.
Mailbox with Explicit Acknowledgement
-------------------------------------
By implementing a custom mailbox type it is possible retry message processing
at the receiving actor’s end in order to handle temporary failures. This
pattern is mostly useful in the local communication context where delivery
guarantees are otherwise sufficient to fulfill the application’s requirements.
Please note that the caveats for `The Rules for In-JVM (Local) Message Sends`_
do apply.
An example implementation of this pattern is shown at :ref:`mailbox-acking`.
.. _deadletters:
Dead Letters
============
Messages which cannot be delivered (and for which this can be ascertained) will
be delivered to a synthetic actor called ``/deadLetters``. This delivery
happens on a best-effort basis; it may fail even within the local JVM (e.g.
during actor termination). Messages sent via unreliable network transports will
be lost without turning up as dead letters.
What Should I Use Dead Letters For?
-----------------------------------
The main use of this facility is for debugging, especially if an actor send
does not arrive consistently (where usually inspecting the dead letters will
tell you that the sender or recipient was set wrong somewhere along the way).
In order to be useful for this purpose it is good practice to avoid sending to
deadLetters where possible, i.e. run your application with a suitable dead
letter logger (see more below) from time to time and clean up the log output.
This exercise—like all else—requires judicious application of common sense: it
may well be that avoiding to send to a terminated actor complicates the
sender’s code more than is gained in debug output clarity.
The dead letter service follows the same rules with respect to delivery
guarantees as all other message sends, hence it cannot be used to implement
guaranteed delivery.
How do I Receive Dead Letters?
------------------------------
An actor can subscribe to class :class:`akka.actor.DeadLetter` on the event
stream, see :ref:`event-stream-java` (Java) or :ref:`event-stream-scala`
(Scala) for how to do that. The subscribed actor will then receive all dead
letters published in the (local) system from that point onwards. Dead letters
are not propagated over the network, if you want to collect them in one place
you will have to subscribe one actor per network node and forward them
manually. Also consider that dead letters are generated at that node which can
determine that a send operation is failed, which for a remote send can be the
local system (if no network connection can be established) or the remote one
(if the actor you are sending to does not exist at that point in time).
Dead Letters Which are (Usually) not Worrisome
----------------------------------------------
Every time an actor does not terminate by its own decision, there is a chance
that some messages which it sends to itself are lost. There is one which
happens quite easily in complex shutdown scenarios that is usually benign:
seeing a :class:`akka.dispatch.Terminate` message dropped means that two
termination requests were given, but of course only one can succeed. In the
same vein, you might see :class:`akka.actor.Terminated` messages from children
while stopping a hierarchy of actors turning up in dead letters if the parent
is still watching the child when the parent terminates.
.. _Erlang documentation: http://www.erlang.org/faq/academic.html
.. _Nobody Needs Reliable Messaging: http://www.infoq.com/articles/no-reliable-messaging
Other Akka source code examplesHere is a short list of links related to this Akka message-delivery-reliability.rst source code file: |
The search page
Other Akka source code examples at this package level
Click here to learn more about this project
