Axis 2 example source code file (SwA-enabled-axis2.xml)

This example Axis 2 source code file (SwA-enabled-axis2.xml) is included in the DevDaily.com "Java Source Code Warehouse" project. The intent of this project is to help you "Learn Java by Example" ^TM.

Java - Axis 2 tags/keywords

after, dispatch, dispatch, license, license, predispatch, receiver, requesturibaseddispatcher, soapactionbaseddispatcher, soapmessagebodybaseddispatcher, system, system, uncomment, uncomment

The Axis 2 SwA-enabled-axis2.xml source code

<!--
  ~ Licensed to the Apache Software Foundation (ASF) under one
  ~ or more contributor license agreements. See the NOTICE file
  ~ distributed with this work for additional information
  ~ regarding copyright ownership. The ASF licenses this file
  ~ to you under the Apache License, Version 2.0 (the
  ~ "License"); you may not use this file except in compliance
  ~ with the License. You may obtain a copy of the License at
  ~
  ~ http://www.apache.org/licenses/LICENSE-2.0
  ~
  ~ Unless required by applicable law or agreed to in writing,
  ~ software distributed under the License is distributed on an
  ~ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
  ~ KIND, either express or implied. See the License for the
  ~ specific language governing permissions and limitations
  ~ under the License.
  -->
<axisconfig name="AxisJava2.0">
    <!-- ================================================= -->
    <!-- Parameters -->
    <!-- ================================================= -->
    <parameter name="hotdeployment">true
    <parameter name="hotupdate">false
    <parameter name="enableSwA">true
    <parameter name="cacheAttachments">false
    <!-- Uncomment this to enable REST support -->
    <!--    -->


    <parameter name="userName">admin
    <parameter name="password">axis2

   <!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
    <!--that behaviour.-->
    <parameter name="sendStacktraceDetailsWithFaults">true

    <!-- ================================================= -->
    <!-- Message Receivers -->
    <!-- ================================================= -->
    <!-- This is the Deafult Message Receiver for the Request Response style Operations -->
    <messageReceiver mep="INOUT" class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>

    <!-- ================================================= -->
    <!-- Transport Ins -->
    <!-- ================================================= -->
    <transportReceiver name="http" class="org.apache.axis2.transport.http.SimpleHTTPServer">
        <parameter name="port">6060
    </transportReceiver>

    <!-- Uncomment this one with the appropriate papameters to enable the SMTP transport Receiver
    <transportReceiver name="mail" class="org.apache.axis2.transport.mail.SimpleMailListener">
          <parameter name="transport.mail.pop3.host">127.0.0.1
          <parameter name="transport.mail.pop3.user">axis2
          <parameter name="transport.mail.pop3.password">axis2
          <parameter name="transport.mail.pop3.port">110
          <parameter name="transport.mail.replyToAddress">axis2@127.0.0.1
      </transportReceiver> -->

    <transportReceiver name="tcp" class="org.apache.axis2.transport.tcp.TCPServer">
        <parameter name="port">6060
    </transportReceiver>

    <!-- ================================================= -->
    <!-- Transport Outs -->
    <!-- ================================================= -->

  <transportSender name="http" class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
            <parameter name="PROTOCOL">HTTP/1.1
    </transportSender>
    <transportSender name="tcp" class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
    <transportSender name="local" class="org.apache.axis2.transport.local.LocalTransportSender"/>
    <transportSender name="jms" class="org.apache.axis2.transport.jms.JMSSender"/>

    <!-- Uncomment this one with the appropriate papameters to enable the SMTP transport Receiver
   <transportSender name="mail" class="org.apache.axis2.transport.mail.MailTransportSender">
       <parameter name="transport.mail.smtp.host">127.0.0.1
       <parameter name="transport.mail.smtp.user">axis2
       <parameter name="transport.mail.smtp.password">axis2
       <parameter name="transport.mail.smtp.port">25
   </transportSender>
   -->

    <!-- ================================================= -->
    <!-- Global Modules  -->
    <!-- ================================================= -->
    <!-- Uncomment this to enable Addressing-->
    <module ref="addressing"/> 

    <!-- ================================================= -->
    <!-- Phases  -->
    <!-- ================================================= -->
    <phaseOrder type="inflow">
        <!--  System pre defined phases       -->
        <phase name="TransportIn"/>
        <phase name="PreDispatch"/>
        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
            <handler name="AddressingBasedDispatcher"
                     class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
                <order phase="Dispatch"/>
            </handler>
            <handler name="RequestURIOperationDispatcher"
                     class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher">
                <order phase="Dispatch"/>
            </handler>

            <handler name="RequestURIBasedDispatcher"
                     class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher">
                <order phase="Dispatch"/>
            </handler>

            <handler name="SOAPActionBasedDispatcher"
                     class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher">
                <order phase="Dispatch"/>
            </handler>

            <handler name="SOAPMessageBodyBasedDispatcher"
                     class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher">
                <order phase="Dispatch"/>
            </handler>
        </phase>
        <!--  System pre defined phases       -->
        <!--   After Postdispatch phase module author or or service author can add any phase he want      -->
        <phase name="userphase1"/>
    </phaseOrder>
    <phaseOrder type="outflow">
        <!--      user can add his own phases to this area  -->
        <phase name="userphase1"/>
        <!--system predefined phase-->
        <!--these phase will run irrespective of the service-->
        <phase name="PolicyDetermination"/>
        <phase name="MessageOut"/>
    </phaseOrder>
    <phaseOrder type="INfaultflow">
       <!--  System pre defined phases       -->
        <phase name="TransportIn"/>
        <phase name="PreDispatch"/>
        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
            <handler name="AddressingBasedDispatcher"
                     class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
                <order phase="Dispatch"/>
            </handler>
            <handler name="RequestURIOperationDispatcher"
                     class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher">
                <order phase="Dispatch"/>
            </handler>

            <handler name="RequestURIBasedDispatcher"
                     class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher">
                <order phase="Dispatch"/>
            </handler>

            <handler name="SOAPActionBasedDispatcher"
                     class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher">
                <order phase="Dispatch"/>
            </handler>

            <handler name="SOAPMessageBodyBasedDispatcher"
                     class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher">
                <order phase="Dispatch"/>
            </handler>
        </phase>
        <!--  System pre defined phases       -->
        <!--   After Postdispatch phase module author or or service author can add any phase he want      -->
        <phase name="userphase1"/>
    </phaseOrder>
    <phaseOrder type="Outfaultflow">
        <!--      user can add his own phases to this area  -->
        <phase name="userphase1"/>
        <phase name="PolicyDetermination"/>
        <phase name="MessageOut"/>
    </phaseOrder>
</axisconfig>