|
|
Glassfish example source code file (default-web.xml)
This example Glassfish source code file (default-web.xml) is included in the DevDaily.com
"Java Source Code
Warehouse" project. The intent of this project is to help you "Learn Java by Example" TM.
The Glassfish default-web.xml source code
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--
DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
Copyright (c) 2006-2011 Oracle and/or its affiliates. All rights reserved.
The contents of this file are subject to the terms of either the GNU
General Public License Version 2 only ("GPL") or the Common Development
and Distribution License("CDDL") (collectively, the "License"). You
may not use this file except in compliance with the License. You can
obtain a copy of the License at
https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
or packager/legal/LICENSE.txt. See the License for the specific
language governing permissions and limitations under the License.
When distributing the software, include this License Header Notice in each
file and include the License file at packager/legal/LICENSE.txt.
GPL Classpath Exception:
Oracle designates this particular file as subject to the "Classpath"
exception as provided by Oracle in the GPL Version 2 section of the License
file that accompanied this code.
Modifications:
If applicable, add the following below the License Header, with the fields
enclosed by brackets [] replaced by your own identifying information:
"Portions Copyright [year] [name of copyright owner]"
Contributor(s):
If you wish your version of this file to be governed by only the CDDL or
only the GPL Version 2, indicate your decision by adding "[Contributor]
elects to include this software in this distribution under the [CDDL or GPL
Version 2] license." If you don't indicate a single choice of license, a
recipient has the option to distribute your version of this file under
either the CDDL, the GPL Version 2 or to extend the choice of license to
its licensees as provided above. However, if you add GPL Version 2 code
and therefore, elected the GPL Version 2 license, then the option applies
only if the new code is made subject to such option by the copyright
holder.
-->
<web-app xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="3.0" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">
<!-- ======================== Introduction ============================== -->
<!-- The default deployment descriptor. -->
<!-- -->
<!-- The default deployment descriptor specifies default deployment -->
<!-- descriptor values inherited by any web applications deployed to -->
<!-- the application server. -->
<!-- ============ Built In Context Init Parameter Definitions =========== -->
<!-- Init parameter to force the XML validation of JSF configuration -->
<!-- ressources. -->
<context-param>
<param-name>com.sun.faces.validateXml
<param-value>true
</context-param>
<!-- Init parameter will cause the JSF implementation to bypass -->
<!-- processing the web.xml to determine if we should continue -->
<!-- bootstrapping JSF for the web application. -->
<context-param>
<param-name>com.sun.faces.forceLoadConfiguration
<param-value>true
</context-param>
<!-- ================== Built In Servlet Definitions ==================== -->
<!-- The DefaultDervlet, which is responsible for serving static -->
<!-- resources. -->
<!-- This servlet processes any requests that are not mapped to other -->
<!-- servlets with servlet mappings (defined either here or in your own -->
<!-- web.xml file. This servlet supports the following initialization -->
<!-- parameters (default values have been placed in square brackets): -->
<!-- -->
<!-- debug Debugging detail level for messages logged -->
<!-- by this servlet. [0] -->
<!-- -->
<!-- fileEncoding Encoding to be used to read static resources -->
<!-- [platform default] -->
<!-- -->
<!-- input Input buffer size (in bytes) when reading -->
<!-- resources to be served. [2048] -->
<!-- -->
<!-- listings Should directory listings be produced if there -->
<!-- is no welcome file in this directory? [false] -->
<!-- WARNING: Listings for directories with many -->
<!-- entries can be slow and may consume -->
<!-- significant proportions of server resources. -->
<!-- -->
<!-- sortedBy Specifies the criteria that will be used for -->
<!-- sorting directory entries. Legal values are -->
<!-- NAME, SIZE, and LAST_MODIFIED. [NAME] -->
<!-- -->
<!-- output Output buffer size (in bytes) when writing -->
<!-- resources to be served. [2048] -->
<!-- -->
<!-- readonly Is this context "read only", so HTTP -->
<!-- commands like PUT and DELETE are -->
<!-- rejected? [true] -->
<!-- -->
<!-- readmeFile File name to display with the directory -->
<!-- contents. [null] -->
<!-- -->
<!-- sendfileSize If the connector used supports sendfile, this -->
<!-- represents the minimal file size in KB for -->
<!-- which sendfile will be used. Use a negative -->
<!-- value to always disable sendfile. [48] -->
<!-- -->
<!-- useAcceptRanges Should the Accept-Ranges header be included -->
<!-- in responses where appropriate? [true] -->
<!-- -->
<!-- For directory listing customization. Checks localXsltFile, then -->
<!-- globalXsltFile, then defaults to original behavior. -->
<!-- -->
<!-- localXsltFile Make directory listings an XML doc and -->
<!-- pass the result to this style sheet residing -->
<!-- in that directory. This overrides -->
<!-- globalXsltFile[null] -->
<!-- -->
<!-- globalXsltFile Site wide configuration version of -->
<!-- localXsltFile This argument is expected -->
<!-- to be a physical file. [null] -->
<servlet>
<servlet-name>default
<servlet-class>org.apache.catalina.servlets.DefaultServlet
<init-param>
<param-name>debug
<param-value>0
</init-param>
<init-param>
<param-name>listings
<param-value>false
</init-param>
<load-on-startup>1
</servlet>
<!-- The JSP page compiler and execution servlet, which is the mechanism -->
<!-- used by the application server to support JSP pages. Traditionally, -->
<!-- this servlet is mapped to the URL pattern "*.jsp". -->
<!-- This servlet supports the following initialization parameters -->
<!-- (default values have been placed in square brackets): -->
<!-- -->
<!-- checkInterval If development is false and checkInterval is -->
<!-- greater than zero, background compilations are -->
<!-- enabled. checkInterval is the time in seconds -->
<!-- between checks to see if a JSP page needs to -->
<!-- be recompiled. [0] -->
<!-- -->
<!-- modificationTestInterval -->
<!-- Causes a JSP (and its dependent files) to not -->
<!-- be checked for modification during the -->
<!-- specified time interval (in seconds) from the -->
<!-- last time the JSP was checked for -->
<!-- modification. A value of 0 will cause the JSP -->
<!-- to be checked on every access. -->
<!-- Used in development mode only. [0] -->
<!-- -->
<!-- compiler Which compiler Ant should use to compile JSP -->
<!-- pages. See the Ant documentation for more -->
<!-- information. [javac] -->
<!-- -->
<!-- classdebuginfo Should the class file be compiled with -->
<!-- debugging information? [true] -->
<!-- -->
<!-- classpath What class path should I use while compiling -->
<!-- generated servlets? [Created dynamically -->
<!-- based on the current web application] -->
<!-- [Ignored in Glassfish] -->
<!-- -->
<!-- development Is Jasper used in development mode? If true, -->
<!-- the frequency at which JSPs are checked for -->
<!-- modification may be specified via the -->
<!-- modificationTestInterval parameter. [true] -->
<!-- -->
<!-- enablePooling Determines whether tag handler pooling is -->
<!-- enabled [true] -->
<!-- -->
<!-- fork Tell Ant to fork compiles of JSP pages so that -->
<!-- JSP pages are compiled in their own JVM -->
<!-- (separate from the JVM that the application -->
<!-- server is running in). [true] -->
<!-- -->
<!-- ieClassId The class-id value to be sent to Internet -->
<!-- Explorer when using
<!-- [clsid:8AD9C840-044E-11D1-B3E9-00805F499D93] -->
<!-- -->
<!-- javaEncoding Java file encoding to use for generating java -->
<!-- source files. [UTF8] -->
<!-- -->
<!-- keepgenerated Should we keep the generated Java source code -->
<!-- for each page instead of deleting it? -->
<!-- [true with JDK 5 and before, or for jspc] -->
<!-- [false otherwise] -->
<!-- -->
<!-- saveBytecode Should the generated byte code be saved to -->
<!-- .class files? This option is meaningful only -->
<!-- when Java compiler API, JSR199 (available with -->
<!-- JDK 6) is used for javac compilations. -->
<!-- [false] [true for jspc] -->
<!-- -->
<!-- mappedfile Should we generate static content with one -->
<!-- print statement per input line, to ease -->
<!-- debugging? [true] -->
<!-- -->
<!-- trimSpaces Should white spaces in template text between -->
<!-- actions or directives be trimmed? [false] -->
<!-- -->
<!-- suppressSmap Should the generation of SMAP info for JSR45 -->
<!-- debugging be suppressed? [false] -->
<!-- -->
<!-- dumpSmap Should the SMAP info for JSR45 debugging be -->
<!-- dumped to a file? [false] -->
<!-- False if suppressSmap is true -->
<!-- -->
<!-- genStrAsCharArray Should text strings be generated as char -->
<!-- arrays, to improve performance in some cases? -->
<!-- [false] -->
<!-- -->
<!-- genStrAsByteArray Should text strings be generated as bytes -->
<!-- (encoded with the page encoding), if the page -->
<!-- is not buffered? -->
<!-- [true] -->
<!-- -->
<!-- defaultBufferNone Should the default for the buffer attribute of -->
<!-- the page directive be "none"? [false] -->
<!-- -->
<!-- errorOnUseBeanInvalidClassAttribute -->
<!-- Should Jasper issue an error when the value of -->
<!-- the class attribute in an useBean action is -->
<!-- not a valid bean class? [false] -->
<!-- -->
<!-- scratchdir What scratch directory should we use when -->
<!-- compiling JSP pages? [default work directory -->
<!-- for the current web application] -->
<!-- -->
<!-- xpoweredBy Determines whether X-Powered-By response -->
<!-- header is added by generated servlet [true] -->
<!-- -->
<!-- usePrecompiled If true, it is assumed that JSPs have been -->
<!-- precompiled, and their corresponding servlet -->
<!-- classes have been bundled in the web -->
<!-- application's WEB-INF/lib or WEB-INF/classes, -->
<!-- so that when a JSP is accessed, it is not -->
<!-- compiled, and instead, its precompiled servlet -->
<!-- class is used. [false] -->
<!-- -->
<!-- use-precompiled Same as usePrecompiled. If both are specified, -->
<!-- usePrecompiled takes precedence -->
<!-- -->
<!-- initialCapacity Initial capacity of HashMap mapping JSPs to -->
<!-- their corresponding servlets [32] -->
<!-- -->
<!-- initial-capacity Same as initialCapacity. If both are specified,-->
<!-- initialCapacity takes precedence -->
<!-- -->
<!-- httpMethods Comma separated list of HTTP methods supported -->
<!-- by the JspServlet. Wildcard ("*") denotes -->
<!-- "ALL METHODS". [ALL METHODS] -->
<!-- -->
<!-- reload-interval Specifies the frequency (in seconds) at which -->
<!-- JSP files are checked for modifications. -->
<!-- Setting this value to 0 checks JSPs for -->
<!-- modifications on every request. Setting this -->
<!-- value to -1 disables checks for JSP -->
<!-- modifications and JSP recompilation. -->
<!-- -->
<!-- compilerSourceVM Provides source compatibility with the -->
<!-- specified JDK release (same as -source -->
<!-- javac command-line switch) -->
<!-- -->
<!-- compilerTargetVM Generates class files for specified VM version -->
<!-- (same as -target javac command-line switch) -->
<!-- -->
<!-- system-jar-includes Specify a list (of jars, or fragments of jar -->
<!-- paths) that is used to determine if a system -->
<!-- jar (obtained from the system classloader) -->
<!-- should be included in the javac classpath -->
<!-- [Include all system jars] -->
<!-- -->
<!-- If you wish to use Jikes to compile JSP pages: -->
<!-- * Set the "classpath" initialization parameter appropriately -->
<!-- for this web application. -->
<!-- * Set the "jspCompilerPlugin" initialization parameter to -->
<!-- "org.apache.jasper.compiler.JikesJavaCompiler". -->
<servlet>
<servlet-name>jsp
<servlet-class>org.apache.jasper.servlet.JspServlet
<init-param>
<param-name>xpoweredBy
<param-value>true
</init-param>
<init-param>
<param-name>httpMethods
<param-value>GET,POST,HEAD
</init-param>
<init-param>
<param-name>system-jar-includes
<param-value>
/lib/
\lib\
jstl-impl.jar
el-impl.jar
javax.servlet.jar
javax.servlet.jsp.jar
javax.servlet.jsp.jstl.jar
javax.jms.jar
jsf-api.jar
jsp-impl.jar
jsf-impl.jar
jspcaching-connector.jar
web-glue.jar
</param-value>
</init-param>
<load-on-startup>3
</servlet>
<!-- NOTE: An SSI Filter is also available as an alternative SSI -->
<!-- implementation. Use either the Servlet or the Filter but NOT both. -->
<!-- -->
<!-- Server Side Includes processing servlet, which processes SSI -->
<!-- directives in HTML pages consistent with similar support in web -->
<!-- servers like Apache. Traditionally, this servlet is mapped to the -->
<!-- URL pattern "*.shtml". This servlet supports the following -->
<!-- initialization parameters (default values are in square brackets): -->
<!-- -->
<!-- buffered Should output from this servlet be buffered? -->
<!-- (0=false, 1=true) [0] -->
<!-- -->
<!-- debug Debugging detail level for messages logged -->
<!-- by this servlet. [0] -->
<!-- -->
<!-- expires The number of seconds before a page with SSI -->
<!-- directives will expire. [No default] -->
<!-- -->
<!-- isVirtualWebappRelative -->
<!-- Should "virtual" paths be interpreted as -->
<!-- relative to the context root, instead of -->
<!-- the server root? (0=false, 1=true) [0] -->
<!-- -->
<!-- inputEncoding The encoding to assume for SSI resources if -->
<!-- one is not available from the resource. -->
<!-- [Platform default] -->
<!-- -->
<!-- outputEncoding The encoding to use for the page that results -->
<!-- from the SSI processing. [UTF-8] -->
<!--
<servlet>
<servlet-name>ssi
<servlet-class>org.apache.catalina.ssi.SSIServlet
<init-param>
<param-name>buffered
<param-value>1
</init-param>
<init-param>
<param-name>debug
<param-value>0
</init-param>
<init-param>
<param-name>expires
<param-value>666
</init-param>
<init-param>
<param-name>isVirtualWebappRelative
<param-value>0
</init-param>
<load-on-startup>4
</servlet>
-->
<!-- Common Gateway Includes (CGI) processing servlet, which supports -->
<!-- execution of external applications that conform to the CGI spec -->
<!-- requirements. Typically, this servlet is mapped to the URL pattern -->
<!-- "/cgi-bin/*", which means that any CGI applications that are -->
<!-- executed must be present within the web application. This servlet -->
<!-- supports the following initialization parameters (default values -->
<!-- are in square brackets): -->
<!-- -->
<!-- cgiPathPrefix The CGI search path will start at -->
<!-- webAppRootDir + File.separator + this prefix. -->
<!-- [WEB-INF/cgi] -->
<!-- -->
<!-- debug Debugging detail level for messages logged -->
<!-- by this servlet. [0] -->
<!-- -->
<!-- executable Name of the executable used to run the -->
<!-- script. [perl] -->
<!-- -->
<!-- parameterEncoding Name of parameter encoding to be used with -->
<!-- CGI servlet. -->
<!-- [System.getProperty("file.encoding","UTF-8")] -->
<!-- -->
<!-- passShellEnvironment Should the shell environment variables (if -->
<!-- any) be passed to the CGI script? [false] -->
<!-- -->
<!-- stderrTimeout The time (in milliseconds) to wait for the -->
<!-- reading of stderr to complete before -->
<!-- terminating the CGI process. [2000] -->
<!--
<servlet>
<servlet-name>cgi
<servlet-class>org.apache.catalina.servlets.CGIServlet
<init-param>
<param-name>debug
<param-value>0
</init-param>
<init-param>
<param-name>cgiPathPrefix
<param-value>WEB-INF/cgi
</init-param>
<load-on-startup>5
</servlet>
-->
<!-- ================ Built In Servlet Mappings ========================= -->
<!-- The mapping for the default servlet -->
<servlet-mapping>
<servlet-name>default
<url-pattern>/
</servlet-mapping>
<!-- The mapping for the JSP servlet -->
<servlet-mapping>
<servlet-name>jsp
<url-pattern>*.jsp
<url-pattern>*.jspx
</servlet-mapping>
<!-- The mapping for the SSI servlet -->
<!--
<servlet-mapping>
<servlet-name>ssi
<url-pattern>*.shtml
</servlet-mapping>
-->
<!-- The mapping for the CGI Gateway servlet -->
<!--
<servlet-mapping>
<servlet-name>cgi
<url-pattern>/cgi-bin/*
</servlet-mapping>
-->
<!-- ================== Built In Filter Definitions ===================== -->
<!-- NOTE: An SSI Servlet is also available as an alternative SSI -->
<!-- implementation. Use either the Servlet or the Filter but NOT both. -->
<!-- -->
<!-- Server Side Includes processing filter, which processes SSI -->
<!-- directives in HTML pages consistent with similar support in web -->
<!-- servers like Apache. Traditionally, this filter is mapped to the -->
<!-- URL pattern "*.shtml", though it can be mapped to "*" as it will -->
<!-- selectively enable/disable SSI processing based on mime types. For -->
<!-- this to work you will need to uncomment the .shtml mime type -->
<!-- definition towards the bottom of this file. -->
<!-- The contentType init param allows you to apply SSI processing to JSP -->
<!-- pages, javascript, or any other content you wish. This filter -->
<!-- supports the following initialization parameters (default values are -->
<!-- in square brackets): -->
<!-- -->
<!-- contentType A regex pattern that must be matched before -->
<!-- SSI processing is applied. -->
<!-- [text/x-server-parsed-html(;.*)?] -->
<!-- -->
<!-- debug Debugging detail level for messages logged -->
<!-- by this servlet. [0] -->
<!-- -->
<!-- expires The number of seconds before a page with SSI -->
<!-- directives will expire. [No default] -->
<!-- -->
<!-- isVirtualWebappRelative -->
<!-- Should "virtual" paths be interpreted as -->
<!-- relative to the context root, instead of -->
<!-- the server root? (0=false, 1=true) [0] -->
<!--
<filter>
<filter-name>ssi
<filter-class>
org.apache.catalina.ssi.SSIFilter
</filter-class>
<init-param>
<param-name>contentType
<param-value>text/x-server-parsed-html(;.*)?
</init-param>
<init-param>
<param-name>debug
<param-value>0
</init-param>
<init-param>
<param-name>expires
<param-value>666
</init-param>
<init-param>
<param-name>isVirtualWebappRelative
<param-value>0
</init-param>
</filter>
-->
<!-- ==================== Built In Filter Mappings ====================== -->
<!-- The mapping for the SSI Filter -->
<!--
<filter-mapping>
<filter-name>ssi
<url-pattern>*.shtml
</filter-mapping>
-->
<!-- ==================== Default Session Configuration ================= -->
<!-- You can set the default session timeout (in minutes) for all newly -->
<!-- created sessions by modifying the value below. -->
<session-config>
<session-timeout>30
</session-config>
<!-- ===================== Default MIME Type Mappings =================== -->
<!-- When serving static resources, the application server will -->
<!-- automatically generate a "Content-Type" response header from the -->
<!-- filename extension of the resource, based on these mappings. -->
<!-- Additional mappings may be specified here (to be shared by all -->
<!-- web applications) or in a web application's web.xml deployment -->
<!-- descriptor (for that web application's individual use). -->
<mime-mapping>
<extension>abs
<mime-type>audio/x-mpeg
</mime-mapping>
<mime-mapping>
<extension>ai
<mime-type>application/postscript
</mime-mapping>
<mime-mapping>
<extension>aif
<mime-type>audio/x-aiff
</mime-mapping>
<mime-mapping>
<extension>aifc
<mime-type>audio/x-aiff
</mime-mapping>
<mime-mapping>
<extension>aiff
<mime-type>audio/x-aiff
</mime-mapping>
<mime-mapping>
<extension>aim
<mime-type>application/x-aim
</mime-mapping>
<mime-mapping>
<extension>art
<mime-type>image/x-jg
</mime-mapping>
<mime-mapping>
<extension>asf
<mime-type>video/x-ms-asf
</mime-mapping>
<mime-mapping>
<extension>asx
<mime-type>video/x-ms-asf
</mime-mapping>
<mime-mapping>
<extension>au
<mime-type>audio/basic
</mime-mapping>
<mime-mapping>
<extension>avi
<mime-type>video/x-msvideo
</mime-mapping>
<mime-mapping>
<extension>avx
<mime-type>video/x-rad-screenplay
</mime-mapping>
<mime-mapping>
<extension>bcpio
<mime-type>application/x-bcpio
</mime-mapping>
<mime-mapping>
<extension>bin
<mime-type>application/octet-stream
</mime-mapping>
<mime-mapping>
<extension>bmp
<mime-type>image/bmp
</mime-mapping>
<mime-mapping>
<extension>body
<mime-type>text/html
</mime-mapping>
<mime-mapping>
<extension>cdf
<mime-type>application/x-cdf
</mime-mapping>
<mime-mapping>
<extension>cer
<mime-type>application/x-x509-ca-cert
</mime-mapping>
<mime-mapping>
<extension>class
<mime-type>application/java
</mime-mapping>
<mime-mapping>
<extension>cpio
<mime-type>application/x-cpio
</mime-mapping>
<mime-mapping>
<extension>csh
<mime-type>application/x-csh
</mime-mapping>
<mime-mapping>
<extension>css
<mime-type>text/css
</mime-mapping>
<mime-mapping>
<extension>dib
<mime-type>image/bmp
</mime-mapping>
<mime-mapping>
<extension>doc
<mime-type>application/msword
</mime-mapping>
<mime-mapping>
<extension>dtd
<mime-type>application/xml-dtd
</mime-mapping>
<mime-mapping>
<extension>dv
<mime-type>video/x-dv
</mime-mapping>
<mime-mapping>
<extension>dvi
<mime-type>application/x-dvi
</mime-mapping>
<mime-mapping>
<extension>eps
<mime-type>application/postscript
</mime-mapping>
<mime-mapping>
<extension>etx
<mime-type>text/x-setext
</mime-mapping>
<mime-mapping>
<extension>exe
<mime-type>application/octet-stream
</mime-mapping>
<mime-mapping>
<extension>gif
<mime-type>image/gif
</mime-mapping>
<mime-mapping>
<extension>gk
<mime-type>application/octet-stream
</mime-mapping>
<mime-mapping>
<extension>gtar
<mime-type>application/x-gtar
</mime-mapping>
<mime-mapping>
<extension>gz
<mime-type>application/x-gzip
</mime-mapping>
<mime-mapping>
<extension>hdf
<mime-type>application/x-hdf
</mime-mapping>
<mime-mapping>
<extension>hqx
<mime-type>application/mac-binhex40
</mime-mapping>
<mime-mapping>
<extension>htc
<mime-type>text/x-component
</mime-mapping>
<mime-mapping>
<extension>htm
<mime-type>text/html
</mime-mapping>
<mime-mapping>
<extension>html
<mime-type>text/html
</mime-mapping>
<mime-mapping>
<extension>hqx
<mime-type>application/mac-binhex40
</mime-mapping>
<mime-mapping>
<extension>ico
<mime-type>image/x-icon
</mime-mapping>
<mime-mapping>
<extension>ief
<mime-type>image/ief
</mime-mapping>
<mime-mapping>
<extension>jad
<mime-type>text/vnd.sun.j2me.app-descriptor
</mime-mapping>
<mime-mapping>
<extension>jar
<mime-type>application/java-archive
</mime-mapping>
<mime-mapping>
<extension>java
<mime-type>text/plain
</mime-mapping>
<mime-mapping>
<extension>jnlp
<mime-type>application/x-java-jnlp-file
</mime-mapping>
<mime-mapping>
<extension>jpe
<mime-type>image/jpeg
</mime-mapping>
<mime-mapping>
<extension>jpeg
<mime-type>image/jpeg
</mime-mapping>
<mime-mapping>
<extension>jpg
<mime-type>image/jpeg
</mime-mapping>
<mime-mapping>
<extension>js
<mime-type>text/javascript
</mime-mapping>
<mime-mapping>
<extension>kar
<mime-type>audio/x-midi
</mime-mapping>
<mime-mapping>
<extension>latex
<mime-type>application/x-latex
</mime-mapping>
<mime-mapping>
<extension>m3u
<mime-type>audio/x-mpegurl
</mime-mapping>
<mime-mapping>
<extension>mac
<mime-type>image/x-macpaint
</mime-mapping>
<mime-mapping>
<extension>man
<mime-type>application/x-troff-man
</mime-mapping>
<mime-mapping>
<extension>mathml
<mime-type>application/mathml+xml
</mime-mapping>
<mime-mapping>
<extension>me
<mime-type>application/x-troff-me
</mime-mapping>
<mime-mapping>
<extension>mid
<mime-type>audio/x-midi
</mime-mapping>
<mime-mapping>
<extension>midi
<mime-type>audio/x-midi
</mime-mapping>
<mime-mapping>
<extension>mif
<mime-type>application/x-mif
</mime-mapping>
<mime-mapping>
<extension>mov
<mime-type>video/quicktime
</mime-mapping>
<mime-mapping>
<extension>movie
<mime-type>video/x-sgi-movie
</mime-mapping>
<mime-mapping>
<extension>mp1
<mime-type>audio/x-mpeg
</mime-mapping>
<mime-mapping>
<extension>mp2
<mime-type>audio/x-mpeg
</mime-mapping>
<mime-mapping>
<extension>mp3
<mime-type>audio/x-mpeg
</mime-mapping>
<mime-mapping>
<extension>mpa
<mime-type>audio/x-mpeg
</mime-mapping>
<mime-mapping>
<extension>mpe
<mime-type>video/mpeg
</mime-mapping>
<mime-mapping>
<extension>mpeg
<mime-type>video/mpeg
</mime-mapping>
<mime-mapping>
<extension>mpega
<mime-type>audio/x-mpeg
</mime-mapping>
<mime-mapping>
<extension>mpg
<mime-type>video/mpeg
</mime-mapping>
<mime-mapping>
<extension>mpv2
<mime-type>video/mpeg2
</mime-mapping>
<mime-mapping>
<extension>ms
<mime-type>application/x-wais-source
</mime-mapping>
<mime-mapping>
<extension>nc
<mime-type>application/x-netcdf
</mime-mapping>
<mime-mapping>
<extension>oda
<mime-type>application/oda
</mime-mapping>
<mime-mapping>
<extension>ogg
<mime-type>application/ogg
</mime-mapping>
<mime-mapping>
<extension>pbm
<mime-type>image/x-portable-bitmap
</mime-mapping>
<mime-mapping>
<extension>pct
<mime-type>image/pict
</mime-mapping>
<mime-mapping>
<extension>pdf
<mime-type>application/pdf
</mime-mapping>
<mime-mapping>
<extension>pgm
<mime-type>image/x-portable-graymap
</mime-mapping>
<mime-mapping>
<extension>pic
<mime-type>image/pict
</mime-mapping>
<mime-mapping>
<extension>pict
<mime-type>image/pict
</mime-mapping>
<mime-mapping>
<extension>pls
<mime-type>audio/x-scpls
</mime-mapping>
<mime-mapping>
<extension>png
<mime-type>image/png
</mime-mapping>
<mime-mapping>
<extension>pnm
<mime-type>image/x-portable-anymap
</mime-mapping>
<mime-mapping>
<extension>pnt
<mime-type>image/x-macpaint
</mime-mapping>
<mime-mapping>
<extension>ppm
<mime-type>image/x-portable-pixmap
</mime-mapping>
<mime-mapping>
<extension>ppt
<mime-type>application/powerpoint
</mime-mapping>
<mime-mapping>
<extension>ps
<mime-type>application/postscript
</mime-mapping>
<mime-mapping>
<extension>psd
<mime-type>image/x-photoshop
</mime-mapping>
<mime-mapping>
<extension>qt
<mime-type>video/quicktime
</mime-mapping>
<mime-mapping>
<extension>qti
<mime-type>image/x-quicktime
</mime-mapping>
<mime-mapping>
<extension>qtif
<mime-type>image/x-quicktime
</mime-mapping>
<mime-mapping>
<extension>ras
<mime-type>image/x-cmu-raster
</mime-mapping>
<mime-mapping>
<extension>rdf
<mime-type>application/rdf+xml
</mime-mapping>
<mime-mapping>
<extension>rgb
<mime-type>image/x-rgb
</mime-mapping>
<mime-mapping>
<extension>rm
<mime-type>application/vnd.rn-realmedia
</mime-mapping>
<mime-mapping>
<extension>roff
<mime-type>application/x-troff
</mime-mapping>
<mime-mapping>
<extension>rtf
<mime-type>application/rtf
</mime-mapping>
<mime-mapping>
<extension>rtx
<mime-type>text/richtext
</mime-mapping>
<mime-mapping>
<extension>sh
<mime-type>application/x-sh
</mime-mapping>
<mime-mapping>
<extension>shar
<mime-type>application/x-shar
</mime-mapping>
<!--
<mime-mapping>
<extension>shtml
<mime-type>text/x-server-parsed-html
</mime-mapping>
-->
<mime-mapping>
<extension>sit
<mime-type>application/x-stuffit
</mime-mapping>
<mime-mapping>
<extension>smf
<mime-type>audio/x-midi
</mime-mapping>
<mime-mapping>
<extension>snd
<mime-type>audio/basic
</mime-mapping>
<mime-mapping>
<extension>src
<mime-type>application/x-wais-source
</mime-mapping>
<mime-mapping>
<extension>sv4cpio
<mime-type>application/x-sv4cpio
</mime-mapping>
<mime-mapping>
<extension>sv4crc
<mime-type>application/x-sv4crc
</mime-mapping>
<mime-mapping>
<extension>svg
<mime-type>image/svg+xml
</mime-mapping>
<mime-mapping>
<extension>svgz
<mime-type>image/svg+xml
</mime-mapping>
<mime-mapping>
<extension>swf
<mime-type>application/x-shockwave-flash
</mime-mapping>
<mime-mapping>
<extension>t
<mime-type>application/x-troff
</mime-mapping>
<mime-mapping>
<extension>tar
<mime-type>application/x-tar
</mime-mapping>
<mime-mapping>
<extension>tcl
<mime-type>application/x-tcl
</mime-mapping>
<mime-mapping>
<extension>tex
<mime-type>application/x-tex
</mime-mapping>
<mime-mapping>
<extension>texi
<mime-type>application/x-texinfo
</mime-mapping>
<mime-mapping>
<extension>texinfo
<mime-type>application/x-texinfo
</mime-mapping>
<mime-mapping>
<extension>tif
<mime-type>image/tiff
</mime-mapping>
<mime-mapping>
<extension>tiff
<mime-type>image/tiff
</mime-mapping>
<mime-mapping>
<extension>tr
<mime-type>application/x-troff
</mime-mapping>
<mime-mapping>
<extension>tsv
<mime-type>text/tab-separated-values
</mime-mapping>
<mime-mapping>
<extension>txt
<mime-type>text/plain
</mime-mapping>
<mime-mapping>
<extension>ulw
<mime-type>audio/basic
</mime-mapping>
<mime-mapping>
<extension>ustar
<mime-type>application/x-ustar
</mime-mapping>
<mime-mapping>
<extension>xbm
<mime-type>image/x-xbitmap
</mime-mapping>
<mime-mapping>
<extension>xml
<mime-type>application/xml
</mime-mapping>
<mime-mapping>
<extension>xpm
<mime-type>image/x-xpixmap
</mime-mapping>
<mime-mapping>
<extension>xsl
<mime-type>application/xml
</mime-mapping>
<mime-mapping>
<extension>xslt
<mime-type>application/xslt+xml
</mime-mapping>
<mime-mapping>
<extension>xwd
<mime-type>image/x-xwindowdump
</mime-mapping>
<mime-mapping>
<extension>vsd
<mime-type>application/x-visio
</mime-mapping>
<mime-mapping>
<extension>vxml
<mime-type>application/voicexml+xml
</mime-mapping>
<mime-mapping>
<extension>wav
<mime-type>audio/x-wav
</mime-mapping>
<mime-mapping>
<extension>wbmp
<mime-type>image/vnd.wap.wbmp
</mime-mapping>
<mime-mapping>
<extension>wml
<mime-type>text/vnd.wap.wml
</mime-mapping>
<mime-mapping>
<extension>wmlc
<mime-type>application/vnd.wap.wmlc
</mime-mapping>
<mime-mapping>
<extension>wmls
<mime-type>text/vnd.wap.wmls
</mime-mapping>
<mime-mapping>
<extension>wmlscriptc
<mime-type>application/vnd.wap.wmlscriptc
</mime-mapping>
<mime-mapping>
<extension>wrl
<mime-type>x-world/x-vrml
</mime-mapping>
<mime-mapping>
<extension>xht
<mime-type>application/xhtml+xml
</mime-mapping>
<mime-mapping>
<extension>xhtml
<mime-type>application/xhtml+xml
</mime-mapping>
<mime-mapping>
<extension>xls
<mime-type>application/vnd.ms-excel
</mime-mapping>
<mime-mapping>
<extension>xul
<mime-type>application/vnd.mozilla.xul+xml
</mime-mapping>
<mime-mapping>
<extension>Z
<mime-type>application/x-compress
</mime-mapping>
<mime-mapping>
<extension>z
<mime-type>application/x-compress
</mime-mapping>
<mime-mapping>
<extension>zip
<mime-type>application/zip
</mime-mapping>
<mime-mapping>
<extension>odp
<mime-type>application/x-vnd.oasis.opendocument.presentation
</mime-mapping>
<mime-mapping>
<extension>odt
<mime-type>application/x-vnd.oasis.opendocument.text
</mime-mapping>
<mime-mapping>
<extension>ods
<mime-type>application/x-vnd.oasis.opendocument.spreadsheet
</mime-mapping>
<mime-mapping>
<extension>odg
<mime-type>application/x-vnd.oasis.opendocument.graphics
</mime-mapping>
<!-- ==================== Default Welcome File List ===================== -->
<!-- When a request URI refers to a directory, the default servlet looks -->
<!-- for a "welcome file" within that directory and, if present, -->
<!-- to the corresponding resource URI for display. If no welcome file -->
<!-- is present, the default servlet either serves a directory listing, -->
<!-- or returns a 404 status, depending on how it is configured. -->
<!-- -->
<!-- If you define welcome files in your own application's web.xml -->
<!-- deployment descriptor, that list *replaces* the list configured -->
<!-- here, so be sure that you include any of the default values that -->
<!-- you wish to include. -->
<welcome-file-list>
<welcome-file>index.html
<welcome-file>index.htm
<welcome-file>index.jsp
</welcome-file-list>
<login-config>
<auth-method>BASIC
</login-config>
</web-app>
Other Glassfish examples (source code examples)
Here is a short list of links related to this Glassfish default-web.xml source code file:
|
The search page
Other Glassfish source code examples at this package level
Click here to learn more about this project
