Java example source code file (builddeps.m4)

This example Java source code file (builddeps.m4) is included in the alvinalexander.com "Java Source Code Warehouse" project. The intent of this project is to help you "Learn Java by Example" ^TM.

Learn more about this Java project at its project page.

Java - Java tags/keywords

ac_arg_with, ac_defun, ac_msg_error, as_help_string, bdeps_ftp, bdeps_unzip, ftpserver, general, gnu, license, oracle, this, valid_tool\=yes

The builddeps.m4 Java example source code

#
# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation.  Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#

AC_DEFUN_ONCE([BDEPS_SCAN_FOR_BUILDDEPS],
[
  define(LIST_OF_BUILD_DEPENDENCIES,)
  if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
    if test "x$with_builddeps_conf" != x; then
      AC_MSG_CHECKING([for supplied builddeps configuration file])
      builddepsfile=$with_builddeps_conf
      if test -s $builddepsfile; then
        . $builddepsfile
        AC_MSG_RESULT([loaded!])
      else
        AC_MSG_ERROR([The given builddeps conf file $with_builddeps_conf could not be loaded!])
      fi
    else
      AC_MSG_CHECKING([for builddeps.conf files in sources...])
      builddepsfile=`mktemp`
      touch $builddepsfile
      # Put all found confs into a single file.
      find ${SRC_ROOT} -name builddeps.conf -exec cat \{\} \; >> $builddepsfile
      # Source the file to acquire the variables
      if test -s $builddepsfile; then
        . $builddepsfile
        AC_MSG_RESULT([found at least one!])
      else
        AC_MSG_ERROR([Could not find any builddeps.conf at all!])
      fi
    fi
    # Create build and target names that use _ instead of "-" and ".".
    # This is necessary to use them in variable names.
    build_var=`echo ${OPENJDK_BUILD_AUTOCONF_NAME} | tr '-' '_' | tr '.' '_'`
    target_var=`echo ${OPENJDK_TARGET_AUTOCONF_NAME} | tr '-' '_' | tr '.' '_'`
    # Extract rewrite information for build and target
    eval rewritten_build=\${REWRITE_${build_var}}
    if test "x$rewritten_build" = x; then
      rewritten_build=${OPENJDK_BUILD_AUTOCONF_NAME}
      echo Build stays the same $rewritten_build
    else
      echo Rewriting build for builddeps into $rewritten_build
    fi
    eval rewritten_target=\${REWRITE_${target_var}}
    if test "x$rewritten_target" = x; then
      rewritten_target=${OPENJDK_TARGET_AUTOCONF_NAME}
      echo Target stays the same $rewritten_target
    else
      echo Rewriting target for builddeps into $rewritten_target
    fi
    rewritten_build_var=`echo ${rewritten_build} | tr '-' '_' | tr '.' '_'`
    rewritten_target_var=`echo ${rewritten_target} | tr '-' '_' | tr '.' '_'`
  fi
  AC_CHECK_PROGS(BDEPS_UNZIP, [7z unzip])
  if test "x$BDEPS_UNZIP" = x7z; then
    BDEPS_UNZIP="7z x"
  fi

  AC_CHECK_PROGS(BDEPS_FTP, [wget lftp ftp])
])

AC_DEFUN([BDEPS_FTPGET],
[
  # $1 is the ftp://abuilddeps.server.com/libs/cups.zip
  # $2 is the local file name for the downloaded file.
  VALID_TOOL=no
  if test "x$BDEPS_FTP" = xwget; then
    VALID_TOOL=yes
    wget -O $2 $1
  fi
  if test "x$BDEPS_FTP" = xlftp; then
    VALID_TOOL=yes
    lftp -c "get $1 -o $2"
  fi
  if test "x$BDEPS_FTP" = xftp; then
    VALID_TOOL=yes
    FTPSERVER=`echo $1 | cut -f 3 -d '/'`
    FTPPATH=`echo $1 | cut -f 4- -d '/'`
    FTPUSERPWD=${FTPSERVER%%@*}
    if test "x$FTPSERVER" != "x$FTPUSERPWD"; then
      FTPUSER=${userpwd%%:*}
      FTPPWD=${userpwd#*@}
      FTPSERVER=${FTPSERVER#*@}
    else
      FTPUSER=ftp
      FTPPWD=ftp
    fi
    # the "pass" command does not work on some
    # ftp clients (read ftp.exe) but if it works,
    # passive mode is better!
    ( \
        echo "user $FTPUSER $FTPPWD"        ; \
        echo "pass"                         ; \
        echo "bin"                          ; \
        echo "get $FTPPATH $2"              ; \
    ) | ftp -in $FTPSERVER
  fi
  if test "x$VALID_TOOL" != xyes; then
    AC_MSG_ERROR([I do not know how to use the tool: $BDEPS_FTP])
  fi
])

AC_DEFUN([BDEPS_CHECK_MODULE],
[
  define([LIST_OF_BUILD_DEPENDENCIES],LIST_OF_BUILD_DEPENDENCIES[$2=$3'\n'])
  if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
    # Source the builddeps file again, to make sure it uses the latest variables!
    . $builddepsfile
    # Look for a target and build machine specific resource!
    eval resource=\${builddep_$2_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
    if test "x$resource" = x; then
      # Ok, lets instead look for a target specific resource
      eval resource=\${builddep_$2_TARGET_${rewritten_target_var}}
    fi
    if test "x$resource" = x; then
      # Ok, lets instead look for a build specific resource
      eval resource=\${builddep_$2_BUILD_${rewritten_build_var}}
    fi
    if test "x$resource" = x; then
      # Ok, lets instead look for a generic resource
      # (The $2 comes from M4 and not the shell, thus no need for eval here.)
      resource=${builddep_$2}
    fi
    if test "x$resource" != x; then
      AC_MSG_NOTICE([Using builddeps $resource for $2])
      # If the resource in the builddeps.conf file is an existing directory,
      # for example /java/linux/cups
      if test -d ${resource}; then
        depdir=${resource}
      else
        BDEPS_FETCH($2, $resource, $with_builddeps_server, $with_builddeps_dir, depdir)
      fi
      # Source the builddeps file again, because in the previous command, the depdir
      # was updated to point at the current build dependency install directory.
      . $builddepsfile
      # Now extract variables from the builddeps.conf files.
      theroot=${builddep_$2_ROOT}
      thecflags=${builddep_$2_CFLAGS}
      thelibs=${builddep_$2_LIBS}
      if test "x$depdir" = x; then
        AC_MSG_ERROR([Could not download build dependency $2])
      fi
      $1=$depdir
      if test "x$theroot" != x; then
        $1="$theroot"
      fi
      if test "x$thecflags" != x; then
        $1_CFLAGS="$thecflags"
      fi
      if test "x$thelibs" != x; then
        $1_LIBS="$thelibs"
      fi
      m4_default([$4], [:])
      m4_ifvaln([$5], [else $5])
    fi
    m4_ifvaln([$5], [else $5])
  fi
])

AC_DEFUN([BDEPS_FETCH],
[
  # $1 is for example mymodule
  # $2 is for example libs/general/libmymod_1_2_3.zip
  # $3 is for example ftp://mybuilddeps.myserver.com/builddeps
  # $4 is for example /localhome/builddeps
  # $5 is the name of the variable into which we store the depdir, eg MYMOD
  # Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and
  # unzip into the directory: /localhome/builddeps/libmymod_1_2_3
  filename=`basename $2`
  filebase=`echo $filename | sed 's/\.[[^\.]]*$//'`
  filebase=${filename%%.*}
  extension=${filename#*.}
  installdir=$4/$filebase
  if test ! -f $installdir/$filename.unpacked; then
    AC_MSG_NOTICE([Downloading build dependency $1 from $3/$2 and installing into $installdir])
    if test ! -d $installdir; then
      mkdir -p $installdir
    fi
    if test ! -d $installdir; then
      AC_MSG_ERROR([Could not create directory $installdir])
    fi
    tmpfile=`mktemp $installdir/$1.XXXXXXXXX`
    touch $tmpfile
    if test ! -f $tmpfile; then
      AC_MSG_ERROR([Could not create files in directory $installdir])
    fi
    BDEPS_FTPGET([$3/$2] , [$tmpfile])
    mv $tmpfile $installdir/$filename
    if test ! -s $installdir/$filename; then
      AC_MSG_ERROR([Could not download $3/$2])
    fi
    case "$extension" in
      zip)  echo "Unzipping $installdir/$filename..."
        (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked)
        ;;
      tar.gz) echo "Untaring $installdir/$filename..."
        (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
        ;;
      tgz) echo "Untaring $installdir/$filename..."
        (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
        ;;
      *) AC_MSG_ERROR([Cannot handle build depency archive with extension $extension])
        ;;
    esac
  fi
  if test -f $installdir/$filename.unpacked; then
    $5=$installdir
  fi
])

AC_DEFUN_ONCE([BDEPS_CONFIGURE_BUILDDEPS],
[
  AC_ARG_WITH(builddeps-conf, [AS_HELP_STRING([--with-builddeps-conf],
      [use this configuration file for the builddeps])])

  AC_ARG_WITH(builddeps-server, [AS_HELP_STRING([--with-builddeps-server],
      [download and use build dependencies from this server url])])

  AC_ARG_WITH(builddeps-dir, [AS_HELP_STRING([--with-builddeps-dir],
      [store downloaded build dependencies here @<:@/localhome/builddeps@:>@])],
      [],
      [with_builddeps_dir=/localhome/builddeps])

  AC_ARG_WITH(builddeps-group, [AS_HELP_STRING([--with-builddeps-group],
      [chgrp the downloaded build dependencies to this group])])
])