Java example source code file (XMLDocumentFragmentScannerImpl.java)
The XMLDocumentFragmentScannerImpl.java Java example source code
/*
* Copyright (c) 2003, 2013, Oracle and/or its affiliates. All rights reserved.
*/
/*
* Copyright 2005 The Apache Software Foundation.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.sun.org.apache.xerces.internal.impl;
import com.sun.xml.internal.stream.XMLBufferListener;
import com.sun.xml.internal.stream.XMLEntityStorage;
import com.sun.xml.internal.stream.XMLInputFactoryImpl;
import com.sun.xml.internal.stream.dtd.DTDGrammarUtil;
import java.io.EOFException;
import java.io.IOException;
import javax.xml.stream.XMLInputFactory;
import javax.xml.stream.events.XMLEvent;
import com.sun.org.apache.xerces.internal.impl.msg.XMLMessageFormatter;
import com.sun.org.apache.xerces.internal.util.AugmentationsImpl;
import com.sun.org.apache.xerces.internal.util.XMLAttributesIteratorImpl;
import com.sun.org.apache.xerces.internal.util.XMLChar;
import com.sun.org.apache.xerces.internal.util.XMLStringBuffer;
import com.sun.org.apache.xerces.internal.util.XMLSymbols;
import com.sun.org.apache.xerces.internal.xni.QName;
import com.sun.org.apache.xerces.internal.xni.XMLAttributes;
import com.sun.org.apache.xerces.internal.xni.XMLDocumentHandler;
import com.sun.org.apache.xerces.internal.xni.XMLResourceIdentifier;
import com.sun.org.apache.xerces.internal.xni.XMLString;
import com.sun.org.apache.xerces.internal.xni.XNIException;
import com.sun.org.apache.xerces.internal.xni.parser.XMLComponent;
import com.sun.org.apache.xerces.internal.xni.parser.XMLComponentManager;
import com.sun.org.apache.xerces.internal.xni.parser.XMLConfigurationException;
import com.sun.org.apache.xerces.internal.xni.parser.XMLDocumentScanner;
import com.sun.org.apache.xerces.internal.xni.parser.XMLInputSource;
import com.sun.org.apache.xerces.internal.xni.Augmentations;
import com.sun.org.apache.xerces.internal.impl.Constants;
import com.sun.org.apache.xerces.internal.impl.XMLEntityHandler;
import com.sun.org.apache.xerces.internal.util.NamespaceSupport;
import com.sun.org.apache.xerces.internal.utils.SecuritySupport;
import com.sun.org.apache.xerces.internal.utils.XMLLimitAnalyzer;
import com.sun.org.apache.xerces.internal.utils.XMLSecurityManager;
import com.sun.org.apache.xerces.internal.utils.XMLSecurityManager.Limit;
import com.sun.org.apache.xerces.internal.utils.XMLSecurityManager.State;
import com.sun.org.apache.xerces.internal.utils.XMLSecurityPropertyManager;
import com.sun.org.apache.xerces.internal.xni.NamespaceContext;
import javax.xml.XMLConstants;
import javax.xml.stream.XMLStreamConstants;
import javax.xml.stream.events.XMLEvent;
/**
*
* This class is responsible for scanning the structure and content
* of document fragments.
*
* This class has been modified as per the new design which is more suited to
* efficiently build pull parser. Lot of improvements have been done and
* the code has been added to support stax functionality/features.
*
* @author Neeraj Bajaj SUN Microsystems
* @author K.Venugopal SUN Microsystems
* @author Glenn Marcy, IBM
* @author Andy Clark, IBM
* @author Arnaud Le Hors, IBM
* @author Eric Ye, IBM
* @author Sunitha Reddy, SUN Microsystems
* @version $Id: XMLDocumentFragmentScannerImpl.java,v 1.19 2010-11-02 19:54:55 joehw Exp $
*
*/
public class XMLDocumentFragmentScannerImpl
extends XMLScanner
implements XMLDocumentScanner, XMLComponent, XMLEntityHandler, XMLBufferListener {
//
// Constants
//
protected int fElementAttributeLimit;
/** External subset resolver. **/
protected ExternalSubsetResolver fExternalSubsetResolver;
// scanner states
//XXX this should be divided into more states.
/** Scanner state: start of markup. */
protected static final int SCANNER_STATE_START_OF_MARKUP = 21;
/** Scanner state: content. */
protected static final int SCANNER_STATE_CONTENT = 22;
/** Scanner state: processing instruction. */
protected static final int SCANNER_STATE_PI = 23;
/** Scanner state: DOCTYPE. */
protected static final int SCANNER_STATE_DOCTYPE = 24;
/** Scanner state: XML Declaration */
protected static final int SCANNER_STATE_XML_DECL = 25;
/** Scanner state: root element. */
protected static final int SCANNER_STATE_ROOT_ELEMENT = 26;
/** Scanner state: comment. */
protected static final int SCANNER_STATE_COMMENT = 27;
/** Scanner state: reference. */
protected static final int SCANNER_STATE_REFERENCE = 28;
// <book type="hard"> reading attribute name 'type'
protected static final int SCANNER_STATE_ATTRIBUTE = 29;
// <book type="hard"> //reading attribute value.
protected static final int SCANNER_STATE_ATTRIBUTE_VALUE = 30;
/** Scanner state: trailing misc. USED BY DOCUMENT_SCANNER_IMPL*/
//protected static final int SCANNER_STATE_TRAILING_MISC = 32;
/** Scanner state: end of input. */
protected static final int SCANNER_STATE_END_OF_INPUT = 33;
/** Scanner state: terminated. */
protected static final int SCANNER_STATE_TERMINATED = 34;
/** Scanner state: CDATA section. */
protected static final int SCANNER_STATE_CDATA = 35;
/** Scanner state: Text declaration. */
protected static final int SCANNER_STATE_TEXT_DECL = 36;
/** Scanner state: Text declaration. */
protected static final int SCANNER_STATE_CHARACTER_DATA = 37;
//<book type="hard">foo
protected static final int SCANNER_STATE_START_ELEMENT_TAG = 38;
//<book type="hard">foo reading
protected static final int SCANNER_STATE_END_ELEMENT_TAG = 39;
protected static final int SCANNER_STATE_CHAR_REFERENCE = 40;
protected static final int SCANNER_STATE_BUILT_IN_REFS = 41;
// feature identifiers
/** Feature identifier: notify built-in refereces. */
protected static final String NOTIFY_BUILTIN_REFS =
Constants.XERCES_FEATURE_PREFIX + Constants.NOTIFY_BUILTIN_REFS_FEATURE;
/** Property identifier: entity resolver. */
protected static final String ENTITY_RESOLVER =
Constants.XERCES_PROPERTY_PREFIX + Constants.ENTITY_RESOLVER_PROPERTY;
/** Feature identifier: standard uri conformant */
protected static final String STANDARD_URI_CONFORMANT =
Constants.XERCES_FEATURE_PREFIX +Constants.STANDARD_URI_CONFORMANT_FEATURE;
/** Property identifier: Security property manager. */
private static final String XML_SECURITY_PROPERTY_MANAGER =
Constants.XML_SECURITY_PROPERTY_MANAGER;
/** access external dtd: file protocol
* For DOM/SAX, the secure feature is set to true by default
*/
final static String EXTERNAL_ACCESS_DEFAULT = Constants.EXTERNAL_ACCESS_DEFAULT;
// recognized features and properties
/** Recognized features. */
private static final String[] RECOGNIZED_FEATURES = {
NAMESPACES,
VALIDATION,
NOTIFY_BUILTIN_REFS,
NOTIFY_CHAR_REFS,
Constants.STAX_REPORT_CDATA_EVENT
};
/** Feature defaults. */
private static final Boolean[] FEATURE_DEFAULTS = {
Boolean.TRUE,
null,
Boolean.FALSE,
Boolean.FALSE,
Boolean.TRUE
};
/** Recognized properties. */
private static final String[] RECOGNIZED_PROPERTIES = {
SYMBOL_TABLE,
ERROR_REPORTER,
ENTITY_MANAGER,
XML_SECURITY_PROPERTY_MANAGER
};
/** Property defaults. */
private static final Object[] PROPERTY_DEFAULTS = {
null,
null,
null,
EXTERNAL_ACCESS_DEFAULT
};
private static final char [] cdata = {'[','C','D','A','T','A','['};
static final char [] xmlDecl = {'<','?','x','m','l'};
private static final char [] endTag = {'<','/'};
// debugging
/** Debug scanner state. */
private static final boolean DEBUG_SCANNER_STATE = false;
/** Debug driver. */
private static final boolean DEBUG_DISPATCHER = false;
/** Debug content driver scanning. */
protected static final boolean DEBUG_START_END_ELEMENT = false;
/** Debug driver next */
protected static final boolean DEBUG_NEXT = false ;
/** Debug driver next */
protected static final boolean DEBUG = false;
protected static final boolean DEBUG_COALESCE = false;
//
// Data
//
// protected data
/** Document handler. */
protected XMLDocumentHandler fDocumentHandler;
protected int fScannerLastState ;
/** Entity Storage */
protected XMLEntityStorage fEntityStore;
/** Entity stack. */
protected int[] fEntityStack = new int[4];
/** Markup depth. */
protected int fMarkupDepth;
//is the element empty
protected boolean fEmptyElement ;
//track if we are reading attributes, this is usefule while
//there is a callback
protected boolean fReadingAttributes = false;
/** Scanner state. */
protected int fScannerState;
/** SubScanner state: inside scanContent method. */
protected boolean fInScanContent = false;
protected boolean fLastSectionWasCData = false;
protected boolean fLastSectionWasEntityReference = false;
protected boolean fLastSectionWasCharacterData = false;
/** has external dtd */
protected boolean fHasExternalDTD;
/** Standalone. */
protected boolean fStandaloneSet;
protected boolean fStandalone;
protected String fVersion;
// element information
/** Current element. */
protected QName fCurrentElement;
/** Element stack. */
protected ElementStack fElementStack = new ElementStack();
protected ElementStack2 fElementStack2 = new ElementStack2();
// other info
/** Document system identifier.
* REVISIT: So what's this used for? - NG
* protected String fDocumentSystemId;
******/
protected String fPITarget ;
//xxx do we need to create an extra XMLString object... look for using fTempString for collecting all the data values
protected XMLString fPIData = new XMLString();
// features
/** Notify built-in references. */
protected boolean fNotifyBuiltInRefs = false;
//STAX related properties
//defaultValues.
protected boolean fSupportDTD = true;
protected boolean fReplaceEntityReferences = true;
protected boolean fSupportExternalEntities = false;
protected boolean fReportCdataEvent = false ;
protected boolean fIsCoalesce = false ;
protected String fDeclaredEncoding = null;
/** Xerces Feature: Disallow doctype declaration. */
protected boolean fDisallowDoctype = false;
/**
* comma-delimited list of protocols that are allowed for the purpose
* of accessing external dtd or entity references
*/
protected String fAccessExternalDTD = EXTERNAL_ACCESS_DEFAULT;
/**
* standard uri conformant (strict uri).
* http://apache.org/xml/features/standard-uri-conformant
*/
protected boolean fStrictURI;
// drivers
/** Active driver. */
protected Driver fDriver;
/** Content driver. */
protected Driver fContentDriver = createContentDriver();
// temporary variables
/** Element QName. */
protected QName fElementQName = new QName();
/** Attribute QName. */
protected QName fAttributeQName = new QName();
/**
* CHANGED: Using XMLAttributesIteratorImpl instead of XMLAttributesImpl. This class
* implements Iterator interface so we can directly give Attributes in the form of
* iterator.
*/
protected XMLAttributesIteratorImpl fAttributes = new XMLAttributesIteratorImpl();
/** String. */
protected XMLString fTempString = new XMLString();
/** String. */
protected XMLString fTempString2 = new XMLString();
/** Array of 3 strings. */
private String[] fStrings = new String[3];
/** Making the buffer accesible to derived class -- String buffer. */
protected XMLStringBuffer fStringBuffer = new XMLStringBuffer();
/** Making the buffer accesible to derived class -- String buffer. */
protected XMLStringBuffer fStringBuffer2 = new XMLStringBuffer();
/** stores character data. */
/** Making the buffer accesible to derived class -- stores PI data */
protected XMLStringBuffer fContentBuffer = new XMLStringBuffer();
/** Single character array. */
private final char[] fSingleChar = new char[1];
private String fCurrentEntityName = null;
// New members
protected boolean fScanToEnd = false;
protected DTDGrammarUtil dtdGrammarUtil= null;
protected boolean fAddDefaultAttr = false;
protected boolean foundBuiltInRefs = false;
//skip element algorithm
static final short MAX_DEPTH_LIMIT = 5 ;
static final short ELEMENT_ARRAY_LENGTH = 200 ;
static final short MAX_POINTER_AT_A_DEPTH = 4 ;
static final boolean DEBUG_SKIP_ALGORITHM = false;
//create a elemnet array of length equal to ELEMENT_ARRAY_LENGTH
String [] fElementArray = new String[ELEMENT_ARRAY_LENGTH] ;
//pointer location where last element was skipped
short fLastPointerLocation = 0 ;
short fElementPointer = 0 ;
//2D array to store pointer info
short [] [] fPointerInfo = new short[MAX_DEPTH_LIMIT] [MAX_POINTER_AT_A_DEPTH] ;
protected String fElementRawname ;
protected boolean fShouldSkip = false;
protected boolean fAdd = false ;
protected boolean fSkip = false;
/** Reusable Augmentations. */
private Augmentations fTempAugmentations = null;
//
// Constructors
//
/** Default constructor. */
public XMLDocumentFragmentScannerImpl() {
} // <init>()
//
// XMLDocumentScanner methods
//
/**
* Sets the input source.
*
* @param inputSource The input source.
*
* @throws IOException Thrown on i/o error.
*/
public void setInputSource(XMLInputSource inputSource) throws IOException {
fEntityManager.setEntityHandler(this);
fEntityManager.startEntity("$fragment$", inputSource, false, true);
// fDocumentSystemId = fEntityManager.expandSystemId(inputSource.getSystemId());
} // setInputSource(XMLInputSource)
/**
* Scans a document.
*
* @param complete True if the scanner should scan the document
* completely, pushing all events to the registered
* document handler. A value of false indicates that
* that the scanner should only scan the next portion
* of the document and return. A scanner instance is
* permitted to completely scan a document if it does
* not support this "pull" scanning model.
*
* @return True if there is more to scan, false otherwise.
*/
public boolean scanDocument(boolean complete)
throws IOException, XNIException {
// keep dispatching "events"
fEntityManager.setEntityHandler(this);
//System.out.println(" get Document Handler in NSDocumentHandler " + fDocumentHandler );
int event = next();
do {
switch (event) {
case XMLStreamConstants.START_DOCUMENT :
//fDocumentHandler.startDocument(fEntityManager.getEntityScanner(),fEntityManager.getEntityScanner().getVersion(),fNamespaceContext,null);// not able to get
break;
case XMLStreamConstants.START_ELEMENT :
//System.out.println(" in scann element");
//fDocumentHandler.startElement(getElementQName(),fAttributes,null);
break;
case XMLStreamConstants.CHARACTERS :
fDocumentHandler.characters(getCharacterData(),null);
break;
case XMLStreamConstants.SPACE:
//check if getCharacterData() is the right function to retrieve ignorableWhitespace information.
//System.out.println("in the space");
//fDocumentHandler.ignorableWhitespace(getCharacterData(), null);
break;
case XMLStreamConstants.ENTITY_REFERENCE :
//entity reference callback are given in startEntity
break;
case XMLStreamConstants.PROCESSING_INSTRUCTION :
fDocumentHandler.processingInstruction(getPITarget(),getPIData(),null);
break;
case XMLStreamConstants.COMMENT :
//System.out.println(" in COMMENT of the XMLNSDocumentScannerImpl");
fDocumentHandler.comment(getCharacterData(),null);
break;
case XMLStreamConstants.DTD :
//all DTD related callbacks are handled in DTDScanner.
//1. Stax doesn't define DTD states as it does for XML Document.
//therefore we don't need to take care of anything here. So Just break;
break;
case XMLStreamConstants.CDATA:
fDocumentHandler.startCDATA(null);
//xxx: check if CDATA values comes from getCharacterData() function
fDocumentHandler.characters(getCharacterData(),null);
fDocumentHandler.endCDATA(null);
//System.out.println(" in CDATA of the XMLNSDocumentScannerImpl");
break;
case XMLStreamConstants.NOTATION_DECLARATION :
break;
case XMLStreamConstants.ENTITY_DECLARATION :
break;
case XMLStreamConstants.NAMESPACE :
break;
case XMLStreamConstants.ATTRIBUTE :
break;
case XMLStreamConstants.END_ELEMENT :
//do not give callback here.
//this callback is given in scanEndElement function.
//fDocumentHandler.endElement(getElementQName(),null);
break;
default :
throw new InternalError("processing event: " + event);
}
//System.out.println("here in before calling next");
event = next();
//System.out.println("here in after calling next");
} while (event!=XMLStreamConstants.END_DOCUMENT && complete);
if(event == XMLStreamConstants.END_DOCUMENT) {
fDocumentHandler.endDocument(null);
return false;
}
return true;
} // scanDocument(boolean):boolean
public com.sun.org.apache.xerces.internal.xni.QName getElementQName(){
if(fScannerLastState == XMLEvent.END_ELEMENT){
fElementQName.setValues(fElementStack.getLastPoppedElement());
}
return fElementQName ;
}
/** return the next state on the input
* @return int
*/
public int next() throws IOException, XNIException {
return fDriver.next();
}
//
// XMLComponent methods
//
/**
* Resets the component. The component can query the component manager
* about any features and properties that affect the operation of the
* component.
*
* @param componentManager The component manager.
*
* @throws SAXException Thrown by component on initialization error.
* For example, if a feature or property is
* required for the operation of the component, the
* component manager may throw a
* SAXNotRecognizedException or a
* SAXNotSupportedException.
*/
public void reset(XMLComponentManager componentManager)
throws XMLConfigurationException {
super.reset(componentManager);
// other settings
// fDocumentSystemId = null;
// sax features
//fAttributes.setNamespaces(fNamespaces);
// xerces features
fReportCdataEvent = componentManager.getFeature(Constants.STAX_REPORT_CDATA_EVENT, true);
fSecurityManager = (XMLSecurityManager)componentManager.getProperty(Constants.SECURITY_MANAGER, null);
fNotifyBuiltInRefs = componentManager.getFeature(NOTIFY_BUILTIN_REFS, false);
Object resolver = componentManager.getProperty(ENTITY_RESOLVER, null);
fExternalSubsetResolver = (resolver instanceof ExternalSubsetResolver) ?
(ExternalSubsetResolver) resolver : null;
//attribute
fReadingAttributes = false;
//xxx: external entities are supported in Xerces
// it would be good to define feature for this case
fSupportExternalEntities = true;
fReplaceEntityReferences = true;
fIsCoalesce = false;
// setup Driver
setScannerState(SCANNER_STATE_CONTENT);
setDriver(fContentDriver);
// JAXP 1.5 features and properties
XMLSecurityPropertyManager spm = (XMLSecurityPropertyManager)
componentManager.getProperty(XML_SECURITY_PROPERTY_MANAGER, null);
fAccessExternalDTD = spm.getValue(XMLSecurityPropertyManager.Property.ACCESS_EXTERNAL_DTD);
fStrictURI = componentManager.getFeature(STANDARD_URI_CONFORMANT, false);
resetCommon();
//fEntityManager.test();
} // reset(XMLComponentManager)
public void reset(PropertyManager propertyManager){
super.reset(propertyManager);
// other settings
// fDocumentSystemId = null;
fNamespaces = ((Boolean)propertyManager.getProperty(XMLInputFactory.IS_NAMESPACE_AWARE)).booleanValue();
fNotifyBuiltInRefs = false ;
//fElementStack2.clear();
//fReplaceEntityReferences = true;
//fSupportExternalEntities = true;
Boolean bo = (Boolean)propertyManager.getProperty(XMLInputFactoryImpl.IS_REPLACING_ENTITY_REFERENCES);
fReplaceEntityReferences = bo.booleanValue();
bo = (Boolean)propertyManager.getProperty(XMLInputFactoryImpl.IS_SUPPORTING_EXTERNAL_ENTITIES);
fSupportExternalEntities = bo.booleanValue();
Boolean cdata = (Boolean)propertyManager.getProperty(Constants.ZEPHYR_PROPERTY_PREFIX + Constants.STAX_REPORT_CDATA_EVENT) ;
if(cdata != null)
fReportCdataEvent = cdata.booleanValue() ;
Boolean coalesce = (Boolean)propertyManager.getProperty(XMLInputFactory.IS_COALESCING) ;
if(coalesce != null)
fIsCoalesce = coalesce.booleanValue();
fReportCdataEvent = fIsCoalesce ? false : (fReportCdataEvent && true) ;
//if fIsCoalesce is set to true, set the value of fReplaceEntityReferences to true,
//if fIsCoalesce is set to false, take the value of fReplaceEntityReferences as set by application
fReplaceEntityReferences = fIsCoalesce ? true : fReplaceEntityReferences;
// setup Driver
//we dont need to do this -- nb.
//setScannerState(SCANNER_STATE_CONTENT);
//setDriver(fContentDriver);
//fEntityManager.test();
// JAXP 1.5 features and properties
XMLSecurityPropertyManager spm = (XMLSecurityPropertyManager)
propertyManager.getProperty(XML_SECURITY_PROPERTY_MANAGER);
fAccessExternalDTD = spm.getValue(XMLSecurityPropertyManager.Property.ACCESS_EXTERNAL_DTD);
fSecurityManager = (XMLSecurityManager)propertyManager.getProperty(Constants.SECURITY_MANAGER);
resetCommon();
} // reset(XMLComponentManager)
void resetCommon() {
// initialize vars
fMarkupDepth = 0;
fCurrentElement = null;
fElementStack.clear();
fHasExternalDTD = false;
fStandaloneSet = false;
fStandalone = false;
fInScanContent = false;
//skipping algorithm
fShouldSkip = false;
fAdd = false;
fSkip = false;
fEntityStore = fEntityManager.getEntityStore();
dtdGrammarUtil = null;
if (fSecurityManager != null) {
fElementAttributeLimit = fSecurityManager.getLimit(XMLSecurityManager.Limit.ELEMENT_ATTRIBUTE_LIMIT);
} else {
fElementAttributeLimit = 0;
}
fLimitAnalyzer = new XMLLimitAnalyzer();
fEntityManager.setLimitAnalyzer(fLimitAnalyzer);
}
/**
* Returns a list of feature identifiers that are recognized by
* this component. This method may return null if no features
* are recognized by this component.
*/
public String[] getRecognizedFeatures() {
return (String[])(RECOGNIZED_FEATURES.clone());
} // getRecognizedFeatures():String[]
/**
* Sets the state of a feature. This method is called by the component
* manager any time after reset when a feature changes state.
* <p>
* <strong>Note: Components should silently ignore features
* that do not affect the operation of the component.
*
* @param featureId The feature identifier.
* @param state The state of the feature.
*
* @throws SAXNotRecognizedException The component should not throw
* this exception.
* @throws SAXNotSupportedException The component should not throw
* this exception.
*/
public void setFeature(String featureId, boolean state)
throws XMLConfigurationException {
super.setFeature(featureId, state);
// Xerces properties
if (featureId.startsWith(Constants.XERCES_FEATURE_PREFIX)) {
String feature = featureId.substring(Constants.XERCES_FEATURE_PREFIX.length());
if (feature.equals(Constants.NOTIFY_BUILTIN_REFS_FEATURE)) {
fNotifyBuiltInRefs = state;
}
}
} // setFeature(String,boolean)
/**
* Returns a list of property identifiers that are recognized by
* this component. This method may return null if no properties
* are recognized by this component.
*/
public String[] getRecognizedProperties() {
return (String[])(RECOGNIZED_PROPERTIES.clone());
} // getRecognizedProperties():String[]
/**
* Sets the value of a property. This method is called by the component
* manager any time after reset when a property changes value.
* <p>
* <strong>Note: Components should silently ignore properties
* that do not affect the operation of the component.
*
* @param propertyId The property identifier.
* @param value The value of the property.
*
* @throws SAXNotRecognizedException The component should not throw
* this exception.
* @throws SAXNotSupportedException The component should not throw
* this exception.
*/
public void setProperty(String propertyId, Object value)
throws XMLConfigurationException {
super.setProperty(propertyId, value);
// Xerces properties
if (propertyId.startsWith(Constants.XERCES_PROPERTY_PREFIX)) {
final int suffixLength = propertyId.length() - Constants.XERCES_PROPERTY_PREFIX.length();
if (suffixLength == Constants.ENTITY_MANAGER_PROPERTY.length() &&
propertyId.endsWith(Constants.ENTITY_MANAGER_PROPERTY)) {
fEntityManager = (XMLEntityManager)value;
return;
}
if (suffixLength == Constants.ENTITY_RESOLVER_PROPERTY.length() &&
propertyId.endsWith(Constants.ENTITY_RESOLVER_PROPERTY)) {
fExternalSubsetResolver = (value instanceof ExternalSubsetResolver) ?
(ExternalSubsetResolver) value : null;
return;
}
}
// Xerces properties
if (propertyId.startsWith(Constants.XERCES_PROPERTY_PREFIX)) {
String property = propertyId.substring(Constants.XERCES_PROPERTY_PREFIX.length());
if (property.equals(Constants.ENTITY_MANAGER_PROPERTY)) {
fEntityManager = (XMLEntityManager)value;
}
return;
}
//JAXP 1.5 properties
if (propertyId.equals(XML_SECURITY_PROPERTY_MANAGER))
{
XMLSecurityPropertyManager spm = (XMLSecurityPropertyManager)value;
fAccessExternalDTD = spm.getValue(XMLSecurityPropertyManager.Property.ACCESS_EXTERNAL_DTD);
}
} // setProperty(String,Object)
/**
* Returns the default state for a feature, or null if this
* component does not want to report a default value for this
* feature.
*
* @param featureId The feature identifier.
*
* @since Xerces 2.2.0
*/
public Boolean getFeatureDefault(String featureId) {
for (int i = 0; i < RECOGNIZED_FEATURES.length; i++) {
if (RECOGNIZED_FEATURES[i].equals(featureId)) {
return FEATURE_DEFAULTS[i];
}
}
return null;
} // getFeatureDefault(String):Boolean
/**
* Returns the default state for a property, or null if this
* component does not want to report a default value for this
* property.
*
* @param propertyId The property identifier.
*
* @since Xerces 2.2.0
*/
public Object getPropertyDefault(String propertyId) {
for (int i = 0; i < RECOGNIZED_PROPERTIES.length; i++) {
if (RECOGNIZED_PROPERTIES[i].equals(propertyId)) {
return PROPERTY_DEFAULTS[i];
}
}
return null;
} // getPropertyDefault(String):Object
//
// XMLDocumentSource methods
//
/**
* setDocumentHandler
*
* @param documentHandler
*/
public void setDocumentHandler(XMLDocumentHandler documentHandler) {
fDocumentHandler = documentHandler;
//System.out.println(" In Set DOCUMENT HANDLER" + fDocumentHandler + " scanner =" + this);
} // setDocumentHandler(XMLDocumentHandler)
/** Returns the document handler */
public XMLDocumentHandler getDocumentHandler(){
return fDocumentHandler;
}
//
// XMLEntityHandler methods
//
/**
* This method notifies of the start of an entity. The DTD has the
* pseudo-name of "[dtd]" parameter entity names start with '%'; and
* general entities are just specified by their name.
*
* @param name The name of the entity.
* @param identifier The resource identifier.
* @param encoding The auto-detected IANA encoding name of the entity
* stream. This value will be null in those situations
* where the entity encoding is not auto-detected (e.g.
* internal entities or a document entity that is
* parsed from a java.io.Reader).
* @param augs Additional information that may include infoset augmentations
*
* @throws XNIException Thrown by handler to signal an error.
*/
public void startEntity(String name,
XMLResourceIdentifier identifier,
String encoding, Augmentations augs) throws XNIException {
// keep track of this entity before fEntityDepth is increased
if (fEntityDepth == fEntityStack.length) {
int[] entityarray = new int[fEntityStack.length * 2];
System.arraycopy(fEntityStack, 0, entityarray, 0, fEntityStack.length);
fEntityStack = entityarray;
}
fEntityStack[fEntityDepth] = fMarkupDepth;
super.startEntity(name, identifier, encoding, augs);
// WFC: entity declared in external subset in standalone doc
if(fStandalone && fEntityStore.isEntityDeclInExternalSubset(name)) {
reportFatalError("MSG_REFERENCE_TO_EXTERNALLY_DECLARED_ENTITY_WHEN_STANDALONE",
new Object[]{name});
}
/** we are not calling the handlers yet.. */
// call handler
if (fDocumentHandler != null && !fScanningAttribute) {
if (!name.equals("[xml]")) {
fDocumentHandler.startGeneralEntity(name, identifier, encoding, augs);
}
}
} // startEntity(String,XMLResourceIdentifier,String)
/**
* This method notifies the end of an entity. The DTD has the pseudo-name
* of "[dtd]" parameter entity names start with '%'; and general entities
* are just specified by their name.
*
* @param name The name of the entity.
* @param augs Additional information that may include infoset augmentations
*
* @throws XNIException Thrown by handler to signal an error.
*/
public void endEntity(String name, Augmentations augs) throws IOException, XNIException {
/**
* // flush possible pending output buffer - see scanContent
* if (fInScanContent && fStringBuffer.length != 0
* && fDocumentHandler != null) {
* fDocumentHandler.characters(fStringBuffer, null);
* fStringBuffer.length = 0; // make sure we know it's been flushed
* }
*/
super.endEntity(name, augs);
// make sure markup is properly balanced
if (fMarkupDepth != fEntityStack[fEntityDepth]) {
reportFatalError("MarkupEntityMismatch", null);
}
/**/
// call handler
if (fDocumentHandler != null && !fScanningAttribute) {
if (!name.equals("[xml]")) {
fDocumentHandler.endGeneralEntity(name, augs);
}
}
} // endEntity(String)
//
// Protected methods
//
// Driver factory methods
/** Creates a content Driver. */
protected Driver createContentDriver() {
return new FragmentContentDriver();
} // createContentDriver():Driver
// scanning methods
/**
* Scans an XML or text declaration.
* <p>
* <pre>
* [23] XMLDecl ::= '<?xml' VersionInfo EncodingDecl? SDDecl? S? '?>'
* [24] VersionInfo ::= S 'version' Eq (' VersionNum ' | " VersionNum ")
* [80] EncodingDecl ::= S 'encoding' Eq ('"' EncName '"' | "'" EncName "'" )
* [81] EncName ::= [A-Za-z] ([A-Za-z0-9._] | '-')*
* [32] SDDecl ::= S 'standalone' Eq (("'" ('yes' | 'no') "'")
* | ('"' ('yes' | 'no') '"'))
*
* [77] TextDecl ::= '<?xml' VersionInfo? EncodingDecl S? '?>'
* </pre>
*
* @param scanningTextDecl True if a text declaration is to
* be scanned instead of an XML
* declaration.
*/
protected void scanXMLDeclOrTextDecl(boolean scanningTextDecl)
throws IOException, XNIException {
// scan decl
super.scanXMLDeclOrTextDecl(scanningTextDecl, fStrings);
fMarkupDepth--;
// pseudo-attribute values
String version = fStrings[0];
String encoding = fStrings[1];
String standalone = fStrings[2];
fDeclaredEncoding = encoding;
// set standalone
fStandaloneSet = standalone != null;
fStandalone = fStandaloneSet && standalone.equals("yes");
///xxx see where its used.. this is not used anywhere. it may be useful for entity to store this information
//but this information is only related with Document Entity.
fEntityManager.setStandalone(fStandalone);
// call handler
if (fDocumentHandler != null) {
if (scanningTextDecl) {
fDocumentHandler.textDecl(version, encoding, null);
} else {
fDocumentHandler.xmlDecl(version, encoding, standalone, null);
}
}
if(version != null){
fEntityScanner.setVersion(version);
fEntityScanner.setXMLVersion(version);
}
// set encoding on reader, only if encoding was not specified by the application explicitly
if (encoding != null && !fEntityScanner.getCurrentEntity().isEncodingExternallySpecified()) {
fEntityScanner.setEncoding(encoding);
}
} // scanXMLDeclOrTextDecl(boolean)
public String getPITarget(){
return fPITarget ;
}
public XMLStringBuffer getPIData(){
return fContentBuffer ;
}
//XXX: why not this function behave as per the state of the parser?
public XMLString getCharacterData(){
if(fUsebuffer){
return fContentBuffer ;
}else{
return fTempString;
}
}
/**
* Scans a processing data. This is needed to handle the situation
* where a document starts with a processing instruction whose
* target name <em>starts with "xml". (e.g. xmlfoo)
*
* @param target The PI target
* @param data The XMLStringBuffer to fill in with the data
*/
protected void scanPIData(String target, XMLStringBuffer data)
throws IOException, XNIException {
super.scanPIData(target, data);
//set the PI target and values
fPITarget = target ;
fMarkupDepth--;
} // scanPIData(String)
/**
* Scans a comment.
* <p>
* <pre>
* [15] Comment ::= '<!--' ((Char - '-') | ('-' (Char - '-')))* '-->'
* </pre>
* <p>
* <strong>Note: Called after scanning past '<!--'
*/
protected void scanComment() throws IOException, XNIException {
fContentBuffer.clear();
scanComment(fContentBuffer);
//getTextCharacters can also be called for reading comments
fUsebuffer = true;
fMarkupDepth--;
} // scanComment()
//xxx value returned by this function may not remain valid if another event is scanned.
public String getComment(){
return fContentBuffer.toString();
}
void addElement(String rawname){
if(fElementPointer < ELEMENT_ARRAY_LENGTH){
//storing element raw name in a linear list of array
fElementArray[fElementPointer] = rawname ;
//storing elemnetPointer for particular element depth
if(DEBUG_SKIP_ALGORITHM){
StringBuffer sb = new StringBuffer() ;
sb.append(" Storing element information ") ;
sb.append(" fElementPointer = " + fElementPointer) ;
sb.append(" fElementRawname = " + fElementQName.rawname) ;
sb.append(" fElementStack.fDepth = " + fElementStack.fDepth);
System.out.println(sb.toString()) ;
}
//store pointer information only when element depth is less MAX_DEPTH_LIMIT
if(fElementStack.fDepth < MAX_DEPTH_LIMIT){
short column = storePointerForADepth(fElementPointer);
if(column > 0){
short pointer = getElementPointer((short)fElementStack.fDepth, (short)(column - 1) );
//identity comparison shouldn't take much time and we can rely on this
//since its guaranteed to have same object id for same string.
if(rawname == fElementArray[pointer]){
fShouldSkip = true ;
fLastPointerLocation = pointer ;
//reset the things and return.
resetPointer((short)fElementStack.fDepth , column) ;
fElementArray[fElementPointer] = null ;
return ;
}else{
fShouldSkip = false ;
}
}
}
fElementPointer++ ;
}
}
void resetPointer(short depth, short column){
fPointerInfo[depth] [column] = (short)0;
}
//returns column information at which pointer was stored.
short storePointerForADepth(short elementPointer){
short depth = (short) fElementStack.fDepth ;
//Stores element pointer locations at particular depth , only 4 pointer locations
//are stored at particular depth for now.
for(short i = 0 ; i < MAX_POINTER_AT_A_DEPTH ; i++){
if(canStore(depth, i)){
fPointerInfo[depth][i] = elementPointer ;
if(DEBUG_SKIP_ALGORITHM){
StringBuffer sb = new StringBuffer() ;
sb.append(" Pointer information ") ;
sb.append(" fElementPointer = " + fElementPointer) ;
sb.append(" fElementStack.fDepth = " + fElementStack.fDepth);
sb.append(" column = " + i ) ;
System.out.println(sb.toString()) ;
}
return i;
}
//else
//pointer was not stored because we reached the limit
}
return -1 ;
}
boolean canStore(short depth, short column){
//colum = 0 , means first element at particular depth
//column = 1, means second element at particular depth
// calle should make sure that it doesn't call for value outside allowed co-ordinates
return fPointerInfo[depth][column] == 0 ? true : false ;
}
short getElementPointer(short depth, short column){
//colum = 0 , means first element at particular depth
//column = 1, means second element at particular depth
// calle should make sure that it doesn't call for value outside allowed co-ordinates
return fPointerInfo[depth][column] ;
}
//this function assumes that string passed is not null and skips
//the following string from the buffer this makes sure
boolean skipFromTheBuffer(String rawname) throws IOException{
if(fEntityScanner.skipString(rawname)){
char c = (char)fEntityScanner.peekChar() ;
//If the start element was completely skipped we should encounter either ' '(space),
//or '/' (in case of empty element) or '>'
if( c == ' ' || c == '/' || c == '>'){
fElementRawname = rawname ;
return true ;
} else{
return false;
}
} else
return false ;
}
boolean skipQElement(String rawname) throws IOException{
final int c = fEntityScanner.getChar(rawname.length());
//if this character is still valid element name -- this means string can't match
if(XMLChar.isName(c)){
return false;
}else{
return fEntityScanner.skipString(rawname);
}
}
protected boolean skipElement() throws IOException {
if(!fShouldSkip) return false ;
if(fLastPointerLocation != 0){
//Look at the next element stored in the array list.. we might just get a match.
String rawname = fElementArray[fLastPointerLocation + 1] ;
if(rawname != null && skipFromTheBuffer(rawname)){
fLastPointerLocation++ ;
if(DEBUG_SKIP_ALGORITHM){
System.out.println("Element " + fElementRawname + " was SKIPPED at pointer location = " + fLastPointerLocation);
}
return true ;
} else{
//reset it back to zero... we haven't got the correct subset yet.
fLastPointerLocation = 0 ;
}
}
//xxx: we can put some logic here as from what column it should start looking
//for now we always start at 0
//fallback to tolerant algorithm, it would look for differnt element stored at different
//depth and get us the pointer location.
return fShouldSkip && skipElement((short)0);
}
//start of the column at which it should try searching
boolean skipElement(short column) throws IOException {
short depth = (short)fElementStack.fDepth ;
if(depth > MAX_DEPTH_LIMIT){
return fShouldSkip = false ;
}
for(short i = column ; i < MAX_POINTER_AT_A_DEPTH ; i++){
short pointer = getElementPointer(depth , i ) ;
if(pointer == 0){
return fShouldSkip = false ;
}
if(fElementArray[pointer] != null && skipFromTheBuffer(fElementArray[pointer])){
if(DEBUG_SKIP_ALGORITHM){
System.out.println();
System.out.println("Element " + fElementRawname + " was SKIPPED at depth = " + fElementStack.fDepth + " column = " + column );
System.out.println();
}
fLastPointerLocation = pointer ;
return fShouldSkip = true ;
}
}
return fShouldSkip = false ;
}
/**
* Scans a start element. This method will handle the binding of
* namespace information and notifying the handler of the start
* of the element.
* <p>
* <pre>
* [44] EmptyElemTag ::= '<' Name (S Attribute)* S? '/>'
* [40] STag ::= '<' Name (S Attribute)* S? '>'
* </pre>
* <p>
* <strong>Note: This method assumes that the leading
* '<' character has been consumed.
* <p>
* <strong>Note: This method uses the fElementQName and
* fAttributes variables. The contents of these variables will be
* destroyed. The caller should copy important information out of
* these variables before calling this method.
* NB: Content in fAttributes is valid only till the state of the parser is XMLEvent.START_ELEMENT
*
* @return True if element is empty. (i.e. It matches
* production [44].
*/
// fElementQName will have the details of element just read..
// fAttributes will have the details of all the attributes.
protected boolean scanStartElement()
throws IOException, XNIException {
if (DEBUG_START_END_ELEMENT) System.out.println( this.getClass().toString() + ">>> scanStartElement()");
//when skipping is true and no more elements should be added
if(fSkip && !fAdd){
//get the stored element -- if everything goes right this should match the
//token in the buffer
QName name = fElementStack.getNext();
if(DEBUG_SKIP_ALGORITHM){
System.out.println("Trying to skip String = " + name.rawname);
}
//Be conservative -- if skipping fails -- stop.
fSkip = fEntityScanner.skipString(name.rawname);
if(fSkip){
if(DEBUG_SKIP_ALGORITHM){
System.out.println("Element SUCESSFULLY skipped = " + name.rawname);
}
fElementStack.push();
fElementQName = name;
}else{
//if skipping fails reposition the stack or fallback to normal way of processing
fElementStack.reposition();
if(DEBUG_SKIP_ALGORITHM){
System.out.println("Element was NOT skipped, REPOSITIONING stack" );
}
}
}
//we are still at the stage of adding elements
//the elements were not matched or
//fSkip is not set to true
if(!fSkip || fAdd){
//get the next element from the stack
fElementQName = fElementStack.nextElement();
// name
if (fNamespaces) {
fEntityScanner.scanQName(fElementQName);
} else {
String name = fEntityScanner.scanName();
fElementQName.setValues(null, name, name, null);
}
if(DEBUG)System.out.println("Element scanned in start element is " + fElementQName.toString());
if(DEBUG_SKIP_ALGORITHM){
if(fAdd){
System.out.println("Elements are being ADDED -- elemet added is = " + fElementQName.rawname + " at count = " + fElementStack.fCount);
}
}
}
//when the elements are being added , we need to check if we are set for skipping the elements
if(fAdd){
//this sets the value of fAdd variable
fElementStack.matchElement(fElementQName);
}
//xxx: We dont need another pointer, fCurrentElement, we can use fElementQName
fCurrentElement = fElementQName;
String rawname = fElementQName.rawname;
fEmptyElement = false;
fAttributes.removeAllAttributes();
if(!seekCloseOfStartTag()){
fReadingAttributes = true;
fAttributeCacheUsedCount =0;
fStringBufferIndex =0;
fAddDefaultAttr = true;
do {
scanAttribute(fAttributes);
if (fSecurityManager != null && !fSecurityManager.isNoLimit(fElementAttributeLimit) &&
fAttributes.getLength() > fElementAttributeLimit){
fErrorReporter.reportError(XMLMessageFormatter.XML_DOMAIN,
"ElementAttributeLimit",
new Object[]{rawname, fElementAttributeLimit },
XMLErrorReporter.SEVERITY_FATAL_ERROR );
}
} while (!seekCloseOfStartTag());
fReadingAttributes=false;
}
if (fEmptyElement) {
//decrease the markup depth..
fMarkupDepth--;
// check that this element was opened in the same entity
if (fMarkupDepth < fEntityStack[fEntityDepth - 1]) {
reportFatalError("ElementEntityMismatch",
new Object[]{fCurrentElement.rawname});
}
// call handler
if (fDocumentHandler != null) {
fDocumentHandler.emptyElement(fElementQName, fAttributes, null);
}
//We should not be popping out the context here in endELement becaause the namespace context is still
//valid when parser is at the endElement state.
//if (fNamespaces) {
// fNamespaceContext.popContext();
//}
//pop the element off the stack..
fElementStack.popElement();
} else {
if(dtdGrammarUtil != null)
dtdGrammarUtil.startElement(fElementQName, fAttributes);
if(fDocumentHandler != null){
//complete element and attributes are traversed in this function so we can send a callback
//here.
//<strong>we shouldn't be sending callback in scanDocument()
fDocumentHandler.startElement(fElementQName, fAttributes, null);
}
}
if (DEBUG_START_END_ELEMENT) System.out.println(this.getClass().toString() + "<<< scanStartElement(): "+fEmptyElement);
return fEmptyElement;
} // scanStartElement():boolean
/**
* Looks for the close of start tag, i.e. if it finds '>' or '/>'
* Characters are consumed.
*/
protected boolean seekCloseOfStartTag() throws IOException, XNIException {
// spaces
boolean sawSpace = fEntityScanner.skipSpaces();
// end tag?
final int c = fEntityScanner.peekChar();
if (c == '>') {
fEntityScanner.scanChar();
return true;
} else if (c == '/') {
fEntityScanner.scanChar();
if (!fEntityScanner.skipChar('>')) {
reportFatalError("ElementUnterminated",
new Object[]{fElementQName.rawname});
}
fEmptyElement = true;
return true;
} else if (!isValidNameStartChar(c) || !sawSpace) {
reportFatalError("ElementUnterminated", new Object[]{fElementQName.rawname});
}
return false;
}
public boolean hasAttributes(){
return fAttributes.getLength() > 0 ? true : false ;
}
/**
* Scans an attribute.
* <p>
* <pre>
* [41] Attribute ::= Name Eq AttValue
* </pre>
* <p>
* <strong>Note: This method assumes that the next
* character on the stream is the first character of the attribute
* name.
* <p>
* <strong>Note: This method uses the fAttributeQName and
* fQName variables. The contents of these variables will be
* destroyed.
*
* @param attributes The attributes list for the scanned attribute.
*/
/**
* protected void scanAttribute(AttributeIteratorImpl attributes)
* throws IOException, XNIException {
* if (DEBUG_START_END_ELEMENT) System.out.println(">>> scanAttribute()");
*
*
* // name
* if (fNamespaces) {
* fEntityScanner.scanQName(fAttributeQName);
* }
* else {
* String name = fEntityScanner.scanName();
* fAttributeQName.setValues(null, name, name, null);
* }
*
* // equals
* fEntityScanner.skipSpaces();
* if (!fEntityScanner.skipChar('=')) {
* reportFatalError("EqRequiredInAttribute",
* new Object[]{fAttributeQName.rawname});
* }
* fEntityScanner.skipSpaces();
*
*
* // content
* int oldLen = attributes.getLength();
*/
/**xxx there is one check of duplicate attribute that has been removed.
* attributes.addAttribute(fAttributeQName, XMLSymbols.fCDATASymbol, null);
*
* // WFC: Unique Att Spec
* if (oldLen == attributes.getLength()) {
* reportFatalError("AttributeNotUnique",
* new Object[]{fCurrentElement.rawname,
* fAttributeQName.rawname});
* }
*/
/*
//REVISIT: one more case needs to be included: external PE and standalone is no
boolean isVC = fHasExternalDTD && !fStandalone;
scanAttributeValue(fTempString, fTempString2,
fAttributeQName.rawname, attributes,
oldLen, isVC);
//attributes.setValue(oldLen, fTempString.toString());
//attributes.setNonNormalizedValue(oldLen, fTempString2.toString());
//attributes.setSpecified(oldLen, true);
AttributeImpl attribute = new AttributeImpl(fAttributeQName.prefix,fAttributeQName.localpart,fAttributeQName.uri,fTempString.toString(),fTempString2.toString(),XMLSymbols.fCDATASymbol,true);
fAttributes.addAttribute(attribute);
if (DEBUG_START_END_ELEMENT) System.out.println("<<< scanAttribute()");
} // scanAttribute(XMLAttributes)
*/
/** return the attribute iterator implementation */
public XMLAttributesIteratorImpl getAttributeIterator(){
if(dtdGrammarUtil != null && fAddDefaultAttr){
dtdGrammarUtil.addDTDDefaultAttrs(fElementQName,fAttributes);
fAddDefaultAttr = false;
}
return fAttributes;
}
/** return if standalone is set */
public boolean standaloneSet(){
return fStandaloneSet;
}
/** return if the doucment is standalone */
public boolean isStandAlone(){
return fStandalone ;
}
/**
* Scans an attribute name value pair.
* <p>
* <pre>
* [41] Attribute ::= Name Eq AttValue
* </pre>
* <p>
* <strong>Note: This method assumes that the next
* character on the stream is the first character of the attribute
* name.
* <p>
* <strong>Note: This method uses the fAttributeQName and
* fQName variables. The contents of these variables will be
* destroyed.
*
* @param attributes The attributes list for the scanned attribute.
*/
protected void scanAttribute(XMLAttributes attributes)
throws IOException, XNIException {
if (DEBUG_START_END_ELEMENT) System.out.println(this.getClass().toString() +">>> scanAttribute()");
// name
if (fNamespaces) {
fEntityScanner.scanQName(fAttributeQName);
} else {
String name = fEntityScanner.scanName();
fAttributeQName.setValues(null, name, name, null);
}
// equals
fEntityScanner.skipSpaces();
if (!fEntityScanner.skipChar('=')) {
reportFatalError("EqRequiredInAttribute",
new Object[] {fCurrentElement.rawname, fAttributeQName.rawname});
}
fEntityScanner.skipSpaces();
int attIndex = 0 ;
//REVISIT: one more case needs to be included: external PE and standalone is no
boolean isVC = fHasExternalDTD && !fStandalone;
//fTempString would store attribute value
///fTempString2 would store attribute non-normalized value
//this function doesn't use 'attIndex'. We are adding the attribute later
//after we have figured out that current attribute is not namespace declaration
//since scanAttributeValue doesn't use attIndex parameter therefore we
//can safely add the attribute later..
XMLString tmpStr = getString();
scanAttributeValue(tmpStr, fTempString2,
fAttributeQName.rawname, attributes,
attIndex, isVC);
// content
int oldLen = attributes.getLength();
//if the attribute name already exists.. new value is replaced with old value
attIndex = attributes.addAttribute(fAttributeQName, XMLSymbols.fCDATASymbol, null);
// WFC: Unique Att Spec
//attributes count will be same if the current attribute name already exists for this element name.
//this means there are two duplicate attributes.
if (oldLen == attributes.getLength()) {
reportFatalError("AttributeNotUnique",
new Object[]{fCurrentElement.rawname,
fAttributeQName.rawname});
}
//tmpString contains attribute value
//we are passing null as the attribute value
attributes.setValue(attIndex, null, tmpStr);
///xxx: nonNormalizedValue is not being set as it is not required by SAX & DOM
//attributes.setNonNormalizedValue(oldLen, fTempString2.toString());
attributes.setSpecified(attIndex, true);
if (DEBUG_START_END_ELEMENT) System.out.println(this.getClass().toString() +"<<< scanAttribute()");
} // scanAttribute(XMLAttributes)
/**
* Scans element content.
*
* @return Returns the next character on the stream.
*/
//CHANGED:
//EARLIER: scanContent()
//NOW: scanContent(XMLStringBuffer)
//It makes things easy if this functions takes XMLStringBuffer as parameter..
//this function appends the data to the buffer.
protected int scanContent(XMLStringBuffer content) throws IOException, XNIException {
//set the fTempString length to 0 before passing it on to scanContent
//scanContent sets the correct co-ordinates as per the content read
fTempString.length = 0;
int c = fEntityScanner.scanContent(fTempString);
content.append(fTempString);
fTempString.length = 0;
if (c == '\r') {
// happens when there is the character reference
//xxx: We know the next chracter.. we should just skip it and add ']' directlry
fEntityScanner.scanChar();
content.append((char)c);
c = -1;
} else if (c == ']') {
//fStringBuffer.clear();
//xxx: We know the next chracter.. we should just skip it and add ']' directlry
content.append((char)fEntityScanner.scanChar());
// remember where we are in case we get an endEntity before we
// could flush the buffer out - this happens when we're parsing an
// entity which ends with a ]
fInScanContent = true;
//
// We work on a single character basis to handle cases such as:
// ']]]>' which we might otherwise miss.
//
if (fEntityScanner.skipChar(']')) {
content.append(']');
while (fEntityScanner.skipChar(']')) {
content.append(']');
}
if (fEntityScanner.skipChar('>')) {
reportFatalError("CDEndInContent", null);
}
}
fInScanContent = false;
c = -1;
}
if (fDocumentHandler != null && content.length > 0) {
//fDocumentHandler.characters(content, null);
}
return c;
} // scanContent():int
/**
* Scans a CDATA section.
* <p>
* <strong>Note: This method uses the fTempString and
* fStringBuffer variables.
*
* @param complete True if the CDATA section is to be scanned
* completely.
*
* @return True if CDATA is completely scanned.
*/
//CHANGED:
protected boolean scanCDATASection(XMLStringBuffer contentBuffer, boolean complete)
throws IOException, XNIException {
// call handler
if (fDocumentHandler != null) {
//fDocumentHandler.startCDATA(null);
}
while (true) {
//scanData will fill the contentBuffer
if (!fEntityScanner.scanData("]]>", contentBuffer)) {
break ;
/** We dont need all this code if we pass ']]>' as delimeter..
* int brackets = 2;
* while (fEntityScanner.skipChar(']')) {
* brackets++;
* }
*
* //When we find more than 2 square brackets
* if (fDocumentHandler != null && brackets > 2) {
* //we dont need to clear the buffer..
* //contentBuffer.clear();
* for (int i = 2; i < brackets; i++) {
* contentBuffer.append(']');
* }
* fDocumentHandler.characters(contentBuffer, null);
* }
*
* if (fEntityScanner.skipChar('>')) {
* break;
* }
* if (fDocumentHandler != null) {
* //we dont need to clear the buffer now..
* //contentBuffer.clear();
* contentBuffer.append("]]");
* fDocumentHandler.characters(contentBuffer, null);
* }
**/
} else {
int c = fEntityScanner.peekChar();
if (c != -1 && isInvalidLiteral(c)) {
if (XMLChar.isHighSurrogate(c)) {
//contentBuffer.clear();
//scan surrogates if any....
scanSurrogates(contentBuffer);
} else {
reportFatalError("InvalidCharInCDSect",
new Object[]{Integer.toString(c,16)});
fEntityScanner.scanChar();
}
}
//by this time we have also read surrogate contents if any...
if (fDocumentHandler != null) {
//fDocumentHandler.characters(contentBuffer, null);
}
}
}
fMarkupDepth--;
if (fDocumentHandler != null && contentBuffer.length > 0) {
//fDocumentHandler.characters(contentBuffer, null);
}
// call handler
if (fDocumentHandler != null) {
//fDocumentHandler.endCDATA(null);
}
return true;
} // scanCDATASection(XMLStringBuffer, boolean):boolean
/**
* Scans an end element.
* <p>
* <pre>
* [42] ETag ::= '</' Name S? '>'
* </pre>
* <p>
* <strong>Note: This method uses the fElementQName variable.
* The contents of this variable will be destroyed. The caller should
* copy the needed information out of this variable before calling
* this method.
*
* @return The element depth.
*/
protected int scanEndElement() throws IOException, XNIException {
if (DEBUG_START_END_ELEMENT) System.out.println(this.getClass().toString() +">>> scanEndElement()");
// pop context
QName endElementName = fElementStack.popElement();
String rawname = endElementName.rawname;
if(DEBUG)System.out.println("endElementName = " + endElementName.toString());
// Take advantage of the fact that next string _should_ be "fElementQName.rawName",
//In scanners most of the time is consumed on checks done for XML characters, we can
// optimize on it and avoid the checks done for endElement,
//we will also avoid symbol table lookup - neeraj.bajaj@sun.com
// this should work both for namespace processing true or false...
//REVISIT: if the string is not the same as expected.. we need to do better error handling..
//We can skip this for now... In any case if the string doesn't match -- document is not well formed.
if (!fEntityScanner.skipString(endElementName.rawname)) {
reportFatalError("ETagRequired", new Object[]{rawname});
}
// end
fEntityScanner.skipSpaces();
if (!fEntityScanner.skipChar('>')) {
reportFatalError("ETagUnterminated",
new Object[]{rawname});
}
fMarkupDepth--;
//we have increased the depth for two markup "<" characters
fMarkupDepth--;
// check that this element was opened in the same entity
if (fMarkupDepth < fEntityStack[fEntityDepth - 1]) {
reportFatalError("ElementEntityMismatch",
new Object[]{rawname});
}
//We should not be popping out the context here in endELement becaause the namespace context is still
//valid when parser is at the endElement state.
//if (fNamespaces) {
// fNamespaceContext.popContext();
//}
// call handler
if (fDocumentHandler != null ) {
//end element is scanned in this function so we can send a callback
//here.
//<strong>we shouldn't be sending callback in scanDocument()
fDocumentHandler.endElement(endElementName, null);
}
if(dtdGrammarUtil != null)
dtdGrammarUtil.endElement(endElementName);
return fMarkupDepth;
} // scanEndElement():int
/**
* Scans a character reference.
* <p>
* <pre>
* [66] CharRef ::= '&#' [0-9]+ ';' | '&#x' [0-9a-fA-F]+ ';'
* </pre>
*/
protected void scanCharReference()
throws IOException, XNIException {
fStringBuffer2.clear();
int ch = scanCharReferenceValue(fStringBuffer2, null);
fMarkupDepth--;
if (ch != -1) {
// call handler
if (fDocumentHandler != null) {
if (fNotifyCharRefs) {
fDocumentHandler.startGeneralEntity(fCharRefLiteral, null, null, null);
}
Augmentations augs = null;
if (fValidation && ch <= 0x20) {
if (fTempAugmentations != null) {
fTempAugmentations.removeAllItems();
}
else {
fTempAugmentations = new AugmentationsImpl();
}
augs = fTempAugmentations;
augs.putItem(Constants.CHAR_REF_PROBABLE_WS, Boolean.TRUE);
}
//xxx: How do we deal with this - how to return charReferenceValues
//now this is being commented because this is taken care in scanDocument()
//fDocumentHandler.characters(fStringBuffer2, null);
if (fNotifyCharRefs) {
fDocumentHandler.endGeneralEntity(fCharRefLiteral, null);
}
}
}
} // scanCharReference()
/**
* Scans an entity reference.
*
* @return returns true if the new entity is started. If it was built-in entity
* 'false' is returned.
* @throws IOException Thrown if i/o error occurs.
* @throws XNIException Thrown if handler throws exception upon
* notification.
*/
protected void scanEntityReference(XMLStringBuffer content) throws IOException, XNIException {
String name = fEntityScanner.scanName();
if (name == null) {
reportFatalError("NameRequiredInReference", null);
return;
}
if (!fEntityScanner.skipChar(';')) {
reportFatalError("SemicolonRequiredInReference", new Object []{name});
}
if (fEntityStore.isUnparsedEntity(name)) {
reportFatalError("ReferenceToUnparsedEntity", new Object[]{name});
}
fMarkupDepth--;
fCurrentEntityName = name;
// handle built-in entities
if (name == fAmpSymbol) {
handleCharacter('&', fAmpSymbol, content);
fScannerState = SCANNER_STATE_BUILT_IN_REFS;
return ;
} else if (name == fLtSymbol) {
handleCharacter('<', fLtSymbol, content);
fScannerState = SCANNER_STATE_BUILT_IN_REFS;
return ;
} else if (name == fGtSymbol) {
handleCharacter('>', fGtSymbol, content);
fScannerState = SCANNER_STATE_BUILT_IN_REFS;
return ;
} else if (name == fQuotSymbol) {
handleCharacter('"', fQuotSymbol, content);
fScannerState = SCANNER_STATE_BUILT_IN_REFS;
return ;
} else if (name == fAposSymbol) {
handleCharacter('\'', fAposSymbol, content);
fScannerState = SCANNER_STATE_BUILT_IN_REFS;
return ;
}
//1. if the entity is external and support to external entities is not required
// 2. or entities should not be replaced
//3. or if it is built in entity reference.
boolean isEE = fEntityStore.isExternalEntity(name);
if((isEE && !fSupportExternalEntities) || (!isEE && !fReplaceEntityReferences) || foundBuiltInRefs){
fScannerState = SCANNER_STATE_REFERENCE;
return ;
}
// start general entity
if (!fEntityStore.isDeclaredEntity(name)) {
//SUPPORT_DTD=false && ReplaceEntityReferences should throw exception
if (!fSupportDTD && fReplaceEntityReferences) {
reportFatalError("EntityNotDeclared", new Object[]{name});
return;
}
//REVISIT: one more case needs to be included: external PE and standalone is no
if ( fHasExternalDTD && !fStandalone) {
if (fValidation)
fErrorReporter.reportError(fEntityScanner, XMLMessageFormatter.XML_DOMAIN,"EntityNotDeclared",
new Object[]{name}, XMLErrorReporter.SEVERITY_ERROR);
} else
reportFatalError("EntityNotDeclared", new Object[]{name});
}
//we are starting the entity even if the entity was not declared
//if that was the case it its taken care in XMLEntityManager.startEntity()
//we immediately call the endEntity. Application gets to know if there was
//any entity that was not declared.
fEntityManager.startEntity(name, false);
//set the scaner state to content.. parser will automatically revive itself at any point of time.
//setScannerState(SCANNER_STATE_CONTENT);
//return true ;
} // scanEntityReference()
// utility methods
/**
* Calls document handler with a single character resulting from
* built-in entity resolution.
*
* @param c
* @param entity built-in name
* @param XMLStringBuffer append the character to buffer
*
* we really dont need to call this function -- this function is only required when
* we integrate with rest of Xerces2. SO maintaining the current behavior and still
* calling this function to hanlde built-in entity reference.
*
*/
private void handleCharacter(char c, String entity, XMLStringBuffer content) throws XNIException {
foundBuiltInRefs = true;
content.append(c);
if (fDocumentHandler != null) {
fSingleChar[0] = c;
if (fNotifyBuiltInRefs) {
fDocumentHandler.startGeneralEntity(entity, null, null, null);
}
fTempString.setValues(fSingleChar, 0, 1);
//fDocumentHandler.characters(fTempString, null);
if (fNotifyBuiltInRefs) {
fDocumentHandler.endGeneralEntity(entity, null);
}
}
} // handleCharacter(char)
// helper methods
/**
* Sets the scanner state.
*
* @param state The new scanner state.
*/
protected final void setScannerState(int state) {
fScannerState = state;
if (DEBUG_SCANNER_STATE) {
System.out.print("### setScannerState: ");
//System.out.print(fScannerState);
System.out.print(getScannerStateName(state));
System.out.println();
}
} // setScannerState(int)
/**
* Sets the Driver.
*
* @param Driver The new Driver.
*/
protected final void setDriver(Driver driver) {
fDriver = driver;
if (DEBUG_DISPATCHER) {
System.out.print("%%% setDriver: ");
System.out.print(getDriverName(driver));
System.out.println();
}
}
//
// Private methods
//
/** Returns the scanner state name. */
protected String getScannerStateName(int state) {
switch (state) {
case SCANNER_STATE_DOCTYPE: return "SCANNER_STATE_DOCTYPE";
case SCANNER_STATE_ROOT_ELEMENT: return "SCANNER_STATE_ROOT_ELEMENT";
case SCANNER_STATE_START_OF_MARKUP: return "SCANNER_STATE_START_OF_MARKUP";
case SCANNER_STATE_COMMENT: return "SCANNER_STATE_COMMENT";
case SCANNER_STATE_PI: return "SCANNER_STATE_PI";
case SCANNER_STATE_CONTENT: return "SCANNER_STATE_CONTENT";
case SCANNER_STATE_REFERENCE: return "SCANNER_STATE_REFERENCE";
case SCANNER_STATE_END_OF_INPUT: return "SCANNER_STATE_END_OF_INPUT";
case SCANNER_STATE_TERMINATED: return "SCANNER_STATE_TERMINATED";
case SCANNER_STATE_CDATA: return "SCANNER_STATE_CDATA";
case SCANNER_STATE_TEXT_DECL: return "SCANNER_STATE_TEXT_DECL";
case SCANNER_STATE_ATTRIBUTE: return "SCANNER_STATE_ATTRIBUTE";
case SCANNER_STATE_ATTRIBUTE_VALUE: return "SCANNER_STATE_ATTRIBUTE_VALUE";
case SCANNER_STATE_START_ELEMENT_TAG: return "SCANNER_STATE_START_ELEMENT_TAG";
case SCANNER_STATE_END_ELEMENT_TAG: return "SCANNER_STATE_END_ELEMENT_TAG";
case SCANNER_STATE_CHARACTER_DATA: return "SCANNER_STATE_CHARACTER_DATA" ;
}
return "??? ("+state+')';
} // getScannerStateName(int):String
public String getEntityName(){
//return the cached name
return fCurrentEntityName;
}
/** Returns the driver name. */
public String getDriverName(Driver driver) {
if (DEBUG_DISPATCHER) {
if (driver != null) {
String name = driver.getClass().getName();
int index = name.lastIndexOf('.');
if (index != -1) {
name = name.substring(index + 1);
index = name.lastIndexOf('$');
if (index != -1) {
name = name.substring(index + 1);
}
}
return name;
}
}
return "null";
} // getDriverName():String
/**
* Check the protocol used in the systemId against allowed protocols
*
* @param systemId the Id of the URI
* @param allowedProtocols a list of allowed protocols separated by comma
* @return the name of the protocol if rejected, null otherwise
*/
String checkAccess(String systemId, String allowedProtocols) throws IOException {
String baseSystemId = fEntityScanner.getBaseSystemId();
String expandedSystemId = fEntityManager.expandSystemId(systemId, baseSystemId,fStrictURI);
return SecuritySupport.checkAccess(expandedSystemId, allowedProtocols, Constants.ACCESS_EXTERNAL_ALL);
}
//
// Classes
//
/**
* @author Neeraj Bajaj, Sun Microsystems.
*/
protected static final class Element {
//
// Data
//
/** Symbol. */
public QName qname;
//raw name stored as characters
public char[] fRawname;
/** The next Element entry. */
public Element next;
//
// Constructors
//
/**
* Constructs a new Element from the given QName and next Element
* reference.
*/
public Element(QName qname, Element next) {
this.qname.setValues(qname);
this.fRawname = qname.rawname.toCharArray();
this.next = next;
}
} // class Element
/**
* Element stack.
*
* @author Neeraj Bajaj, Sun Microsystems.
*/
protected class ElementStack2 {
//
// Data
//
/** The stack data. */
protected QName [] fQName = new QName[20];
//Element depth
protected int fDepth;
//total number of elements
protected int fCount;
//current position
protected int fPosition;
//Mark refers to the position
protected int fMark;
protected int fLastDepth ;
//
// Constructors
//
/** Default constructor. */
public ElementStack2() {
for (int i = 0; i < fQName.length; i++) {
fQName[i] = new QName();
}
fMark = fPosition = 1;
} // <init>()
public void resize(){
/**
* int length = fElements.length;
* Element [] temp = new Element[length * 2];
* System.arraycopy(fElements, 0, temp, 0, length);
* fElements = temp;
*/
//resize QNames
int oldLength = fQName.length;
QName [] tmp = new QName[oldLength * 2];
System.arraycopy(fQName, 0, tmp, 0, oldLength);
fQName = tmp;
for (int i = oldLength; i < fQName.length; i++) {
fQName[i] = new QName();
}
}
//
// Public methods
//
/** Check if the element scanned during the start element
*matches the stored element.
*
*@return true if the match suceeds.
*/
public boolean matchElement(QName element) {
//last depth is the depth when last elemnt was pushed
//if last depth is greater than current depth
if(DEBUG_SKIP_ALGORITHM){
System.out.println("fLastDepth = " + fLastDepth);
System.out.println("fDepth = " + fDepth);
}
boolean match = false;
if(fLastDepth > fDepth && fDepth <= 2){
if(DEBUG_SKIP_ALGORITHM){
System.out.println("Checking if the elements match " + element.rawname + " , " + fQName[fDepth].rawname);
}
if(element.rawname == fQName[fDepth].rawname){
fAdd = false;
//mark this position
//decrease the depth by 1 as arrays are 0 based
fMark = fDepth - 1;
//we found the match and from next element skipping will start, add 1
fPosition = fMark + 1 ;
match = true;
//Once we get match decrease the count -- this was increased by nextElement()
--fCount;
if(DEBUG_SKIP_ALGORITHM){
System.out.println("fAdd FALSE -- NOW ELEMENT SHOULD NOT BE ADDED");
System.out.println("fMark = " + fMark);
System.out.println("fPosition = " + fPosition);
System.out.println("fDepth = " + fDepth);
System.out.println("fCount = " + fCount);
}
}else{
fAdd = true;
if(DEBUG_SKIP_ALGORITHM)System.out.println("fAdd is " + fAdd);
}
}
//store the last depth
fLastDepth = fDepth++;
return match;
} // pushElement(QName):QName
/**
* This function doesn't increase depth. The function in this function is
*broken down into two functions for efficiency. <@see>matchElement.
* This function just returns the pointer to the object and its values are set.
*
*@return QName reference to the next element in the list
*/
public QName nextElement() {
//if number of elements becomes equal to the length of array -- stop the skipping
if (fCount == fQName.length) {
fShouldSkip = false;
fAdd = false;
if(DEBUG_SKIP_ALGORITHM)System.out.println("SKIPPING STOPPED, fShouldSkip = " + fShouldSkip);
//xxx: this is not correct, we are returning the last element
//this wont make any difference since flag has been set to 'false'
return fQName[--fCount];
}
if(DEBUG_SKIP_ALGORITHM){
System.out.println("fCount = " + fCount);
}
return fQName[fCount++];
}
/** Note that this function is considerably different than nextElement()
* This function just returns the previously stored elements
*/
public QName getNext(){
//when position reaches number of elements in the list..
//set the position back to mark, making it a circular linked list.
if(fPosition == fCount){
fPosition = fMark;
}
return fQName[fPosition++];
}
/** returns the current depth
*/
public int popElement(){
return fDepth--;
}
/** Clears the stack without throwing away existing QName objects. */
public void clear() {
fLastDepth = 0;
fDepth = 0;
fCount = 0 ;
fPosition = fMark = 1;
} // clear()
} // class ElementStack
/**
* Element stack. This stack operates without synchronization, error
* checking, and it re-uses objects instead of throwing popped items
* away.
*
* @author Andy Clark, IBM
*/
protected class ElementStack {
//
// Data
//
/** The stack data. */
protected QName[] fElements;
protected int [] fInt = new int[20];
//Element depth
protected int fDepth;
//total number of elements
protected int fCount;
//current position
protected int fPosition;
//Mark refers to the position
protected int fMark;
protected int fLastDepth ;
//
// Constructors
//
/** Default constructor. */
public ElementStack() {
fElements = new QName[20];
for (int i = 0; i < fElements.length; i++) {
fElements[i] = new QName();
}
} // <init>()
//
// Public methods
//
/**
* Pushes an element on the stack.
* <p>
* <strong>Note: The QName values are copied into the
* stack. In other words, the caller does <em>not orphan
* the element to the stack. Also, the QName object returned
* is <em>not orphaned to the caller. It should be
* considered read-only.
*
* @param element The element to push onto the stack.
*
* @return Returns the actual QName object that stores the
*/
//XXX: THIS FUNCTION IS NOT USED
public QName pushElement(QName element) {
if (fDepth == fElements.length) {
QName[] array = new QName[fElements.length * 2];
System.arraycopy(fElements, 0, array, 0, fDepth);
fElements = array;
for (int i = fDepth; i < fElements.length; i++) {
fElements[i] = new QName();
}
}
fElements[fDepth].setValues(element);
return fElements[fDepth++];
} // pushElement(QName):QName
/** Note that this function is considerably different than nextElement()
* This function just returns the previously stored elements
*/
public QName getNext(){
//when position reaches number of elements in the list..
//set the position back to mark, making it a circular linked list.
if(fPosition == fCount){
fPosition = fMark;
}
//store the position of last opened tag at particular depth
//fInt[++fDepth] = fPosition;
if(DEBUG_SKIP_ALGORITHM){
System.out.println("Element at fPosition = " + fPosition + " is " + fElements[fPosition].rawname);
}
//return fElements[fPosition++];
return fElements[fPosition];
}
/** This function should be called only when element was skipped sucessfully.
* 1. Increase the depth - because element was sucessfully skipped.
*2. Store the position of the element token in array "last opened tag" at depth.
*3. increase the position counter so as to point to the next element in the array
*/
public void push(){
fInt[++fDepth] = fPosition++;
}
/** Check if the element scanned during the start element
*matches the stored element.
*
*@return true if the match suceeds.
*/
public boolean matchElement(QName element) {
//last depth is the depth when last elemnt was pushed
//if last depth is greater than current depth
//if(DEBUG_SKIP_ALGORITHM){
// System.out.println("Check if the element " + element.rawname + " matches");
// System.out.println("fLastDepth = " + fLastDepth);
// System.out.println("fDepth = " + fDepth);
//}
boolean match = false;
if(fLastDepth > fDepth && fDepth <= 3){
if(DEBUG_SKIP_ALGORITHM){
System.out.println("----------ENTERED THE LOOP WHERE WE CHECK FOR MATCHING OF ELMENT-----");
System.out.println("Depth = " + fDepth + " Checking if INCOMING element " + element.rawname + " match STORED ELEMENT " + fElements[fDepth - 1].rawname);
}
if(element.rawname == fElements[fDepth - 1].rawname){
fAdd = false;
//mark this position
//decrease the depth by 1 as arrays are 0 based
fMark = fDepth - 1;
//we found the match
fPosition = fMark;
match = true;
//Once we get match decrease the count -- this was increased by nextElement()
--fCount;
if(DEBUG_SKIP_ALGORITHM){
System.out.println("NOW ELEMENT SHOULD NOT BE ADDED, fAdd is set to false");
System.out.println("fMark = " + fMark);
System.out.println("fPosition = " + fPosition);
System.out.println("fDepth = " + fDepth);
System.out.println("fCount = " + fCount);
System.out.println("---------MATCH SUCEEDED-----------------");
System.out.println("");
}
}else{
fAdd = true;
if(DEBUG_SKIP_ALGORITHM)System.out.println("fAdd is " + fAdd);
}
}
//store the position for the current depth
//when we are adding the elements, when skipping
//starts even then this should be tracked ie. when
//calling getNext()
if(match){
//from next element skipping will start, add 1
fInt[fDepth] = fPosition++;
} else{
if(DEBUG_SKIP_ALGORITHM){
System.out.println("At depth = " + fDepth + "array position is = " + (fCount - 1));
}
//sicne fInt[fDepth] contains pointer to the element array which are 0 based.
fInt[fDepth] = fCount - 1;
}
//if number of elements becomes equal to the length of array -- stop the skipping
//xxx: should we do "fCount == fInt.length"
if (fCount == fElements.length) {
fSkip = false;
fAdd = false;
//reposition the stack -- it seems to be too complex document and there is no symmerty in structure
reposition();
if(DEBUG_SKIP_ALGORITHM){
System.out.println("ALL THE ELMENTS IN ARRAY HAVE BEEN FILLED");
System.out.println("REPOSITIONING THE STACK");
System.out.println("-----------SKIPPING STOPPED----------");
System.out.println("");
}
return false;
}
if(DEBUG_SKIP_ALGORITHM){
if(match){
System.out.println("Storing fPosition = " + fInt[fDepth] + " at fDepth = " + fDepth);
}else{
System.out.println("Storing fCount = " + fInt[fDepth] + " at fDepth = " + fDepth);
}
}
//store the last depth
fLastDepth = fDepth;
return match;
} // matchElement(QName):QName
/**
* Returns the next element on the stack.
*
* @return Returns the actual QName object. Callee should
* use this object to store the details of next element encountered.
*/
public QName nextElement() {
if(fSkip){
fDepth++;
//boundary checks are done in matchElement()
return fElements[fCount++];
} else if (fDepth == fElements.length) {
QName[] array = new QName[fElements.length * 2];
System.arraycopy(fElements, 0, array, 0, fDepth);
fElements = array;
for (int i = fDepth; i < fElements.length; i++) {
fElements[i] = new QName();
}
}
return fElements[fDepth++];
} // pushElement(QName):QName
/**
* Pops an element off of the stack by setting the values of
* the specified QName.
* <p>
* <strong>Note: The object returned is not
* orphaned to the caller. Therefore, the caller should consider
* the object to be read-only.
*/
public QName popElement() {
//return the same object that was pushed -- this would avoid
//setting the values for every end element.
//STRONG: this object is read only -- this object reference shouldn't be stored.
if(fSkip || fAdd ){
if(DEBUG_SKIP_ALGORITHM){
System.out.println("POPPING Element, at position " + fInt[fDepth] + " element at that count is = " + fElements[fInt[fDepth]].rawname);
System.out.println("");
}
return fElements[fInt[fDepth--]];
} else{
if(DEBUG_SKIP_ALGORITHM){
System.out.println("Retrieveing element at depth = " + fDepth + " is " + fElements[fDepth].rawname );
}
return fElements[--fDepth] ;
}
//element.setValues(fElements[--fDepth]);
} // popElement(QName)
/** Reposition the stack. fInt [] contains all the opened tags at particular depth.
* Transfer all the opened tags starting from depth '2' to the current depth and reposition them
*as per the depth.
*/
public void reposition(){
for( int i = 2 ; i <= fDepth ; i++){
fElements[i-1] = fElements[fInt[i]];
}
if(DEBUG_SKIP_ALGORITHM){
for( int i = 0 ; i < fDepth ; i++){
System.out.println("fElements[" + i + "]" + " = " + fElements[i].rawname);
}
}
}
/** Clears the stack without throwing away existing QName objects. */
public void clear() {
fDepth = 0;
fLastDepth = 0;
fCount = 0 ;
fPosition = fMark = 1;
} // clear()
/**
* This function is as a result of optimization done for endElement --
* we dont need to set the value for every end element encouterd.
* For Well formedness checks we can have the same QName object that was pushed.
* the values will be set only if application need to know about the endElement
* -- neeraj.bajaj@sun.com
*/
public QName getLastPoppedElement(){
return fElements[fDepth];
}
} // class ElementStack
/**
* Drives the parser to the next state/event on the input. Parser is guaranteed
* to stop at the next state/event.
*
* Internally XML document is divided into several states. Each state represents
* a sections of XML document. When this functions returns normally, it has read
* the section of XML document and returns the state corresponding to section of
* document which has been read. For optimizations, a particular driver
* can read ahead of the section of document (state returned) just read and
* can maintain a different internal state.
*
*
* @author Neeraj Bajaj, Sun Microsystems
*/
protected interface Driver {
/**
* Drives the parser to the next state/event on the input. Parser is guaranteed
* to stop at the next state/event.
*
* Internally XML document is divided into several states. Each state represents
* a sections of XML document. When this functions returns normally, it has read
* the section of XML document and returns the state corresponding to section of
* document which has been read. For optimizations, a particular driver
* can read ahead of the section of document (state returned) just read and
* can maintain a different internal state.
*
* @return state representing the section of document just read.
*
* @throws IOException Thrown on i/o error.
* @throws XNIException Thrown on parse error.
*/
public int next() throws IOException, XNIException;
} // interface Driver
/**
* Driver to handle content scanning. This driver is capable of reading
* the fragment of XML document. When it has finished reading fragment
* of XML documents, it can pass the job of reading to another driver.
*
* This class has been modified as per the new design which is more suited to
* efficiently build pull parser. Lot of performance improvements have been done and
* the code has been added to support stax functionality/features.
*
* @author Neeraj Bajaj, Sun Microsystems
*
*
* @author Andy Clark, IBM
* @author Eric Ye, IBM
*/
protected class FragmentContentDriver
implements Driver {
//
// Driver methods
//
private boolean fContinueDispatching = true;
private boolean fScanningForMarkup = true;
/**
* decides the appropriate state of the parser
*/
private void startOfMarkup() throws IOException {
fMarkupDepth++;
final int ch = fEntityScanner.peekChar();
switch(ch){
case '?' :{
setScannerState(SCANNER_STATE_PI);
fEntityScanner.skipChar(ch);
break;
}
case '!' :{
fEntityScanner.skipChar(ch);
if (fEntityScanner.skipChar('-')) {
if (!fEntityScanner.skipChar('-')) {
reportFatalError("InvalidCommentStart",
null);
}
setScannerState(SCANNER_STATE_COMMENT);
} else if (fEntityScanner.skipString(cdata)) {
setScannerState(SCANNER_STATE_CDATA );
} else if (!scanForDoctypeHook()) {
reportFatalError("MarkupNotRecognizedInContent",
null);
}
break;
}
case '/' :{
setScannerState(SCANNER_STATE_END_ELEMENT_TAG);
fEntityScanner.skipChar(ch);
break;
}
default :{
if (isValidNameStartChar(ch)) {
setScannerState(SCANNER_STATE_START_ELEMENT_TAG);
} else {
reportFatalError("MarkupNotRecognizedInContent",
null);
}
}
}
}//startOfMarkup
private void startOfContent() throws IOException {
if (fEntityScanner.skipChar('<')) {
setScannerState(SCANNER_STATE_START_OF_MARKUP);
} else if (fEntityScanner.skipChar('&')) {
setScannerState(SCANNER_STATE_REFERENCE) ; //XMLEvent.ENTITY_REFERENCE ); //SCANNER_STATE_REFERENCE
} else {
//element content is there..
setScannerState(SCANNER_STATE_CHARACTER_DATA);
}
}//startOfContent
/**
*
* SCANNER_STATE_CONTENT and SCANNER_STATE_START_OF_MARKUP are two super states of the parser.
* At any point of time when in doubt over the current state of the parser, the state should be
* set to SCANNER_STATE_CONTENT. Parser will automatically revive itself and will set state of
* the parser to one of its sub state.
* sub states are defined in the parser on the basis of different XML component like
* SCANNER_STATE_ENTITY_REFERENCE , SCANNER_STATE_START_ELEMENT, SCANNER_STATE_CDATA etc..
* These sub states help the parser to have fine control over the parsing. These are the
* different milepost, parser stops at each sub state (milepost). Based on this state it is
* decided if paresr needs to stop at next milepost ??
*
*/
public void decideSubState() throws IOException {
while( fScannerState == SCANNER_STATE_CONTENT || fScannerState == SCANNER_STATE_START_OF_MARKUP){
switch (fScannerState) {
case SCANNER_STATE_CONTENT: {
startOfContent() ;
break;
}
case SCANNER_STATE_START_OF_MARKUP: {
startOfMarkup() ;
break;
}
}
}
}//decideSubState
/**
* Drives the parser to the next state/event on the input. Parser is guaranteed
* to stop at the next state/event. Internally XML document
* is divided into several states. Each state represents a sections of XML
* document. When this functions returns normally, it has read the section
* of XML document and returns the state corresponding to section of
* document which has been read. For optimizations, a particular driver
* can read ahead of the section of document (state returned) just read and
* can maintain a different internal state.
*
* State returned corresponds to Stax states.
*
* @return state representing the section of document just read.
*
* @throws IOException Thrown on i/o error.
* @throws XNIException Thrown on parse error.
*/
public int next() throws IOException, XNIException {
while (true) {
try {
if(DEBUG_NEXT){
System.out.println("NOW IN FragmentContentDriver");
System.out.println("Entering the FragmentContentDriver with = " + getScannerStateName(fScannerState));
}
//decide the actual sub state of the scanner.For more information refer to the javadoc of
//decideSubState.
switch (fScannerState) {
case SCANNER_STATE_CONTENT: {
final int ch = fEntityScanner.peekChar();
if (ch == '<') {
fEntityScanner.scanChar();
setScannerState(SCANNER_STATE_START_OF_MARKUP);
} else if (ch == '&') {
fEntityScanner.scanChar();
setScannerState(SCANNER_STATE_REFERENCE) ; //XMLEvent.ENTITY_REFERENCE ); //SCANNER_STATE_REFERENCE
break;
} else {
//element content is there..
setScannerState(SCANNER_STATE_CHARACTER_DATA);
break;
}
}
case SCANNER_STATE_START_OF_MARKUP: {
startOfMarkup();
break;
}//case: SCANNER_STATE_START_OF_MARKUP
}//end of switch
//decideSubState() ;
//do some special handling if isCoalesce is set to true.
if(fIsCoalesce){
fUsebuffer = true ;
//if the last section was character data
if(fLastSectionWasCharacterData){
//if we dont encounter any CDATA or ENITY REFERENCE and current state is also not SCANNER_STATE_CHARACTER_DATA
//return the last scanned charactrer data.
if((fScannerState != SCANNER_STATE_CDATA) && (fScannerState != SCANNER_STATE_REFERENCE)
&& (fScannerState != SCANNER_STATE_CHARACTER_DATA)){
fLastSectionWasCharacterData = false;
return XMLEvent.CHARACTERS;
}
}//if last section was CDATA or ENTITY REFERENCE
//xxx: there might be another entity reference or CDATA after this
//<foo>blah blah &<blah blah
else if((fLastSectionWasCData || fLastSectionWasEntityReference)){
//and current state is not SCANNER_STATE_CHARACTER_DATA
//or SCANNER_STATE_CDATA or SCANNER_STATE_REFERENCE
//this means there is nothing more to be coalesced.
//return the CHARACTERS event.
if((fScannerState != SCANNER_STATE_CDATA) && (fScannerState != SCANNER_STATE_REFERENCE)
&& (fScannerState != SCANNER_STATE_CHARACTER_DATA)){
fLastSectionWasCData = false;
fLastSectionWasEntityReference = false;
return XMLEvent.CHARACTERS;
}
}
}
if(DEBUG_NEXT){
System.out.println("Actual scanner state set by decideSubState is = " + getScannerStateName(fScannerState));
}
switch(fScannerState){
case XMLEvent.START_DOCUMENT :
return XMLEvent.START_DOCUMENT;
case SCANNER_STATE_START_ELEMENT_TAG :{
//xxx this function returns true when element is empty.. can be linked to end element event.
//returns true if the element is empty
fEmptyElement = scanStartElement() ;
//if the element is empty the next event is "end element"
if(fEmptyElement){
setScannerState(SCANNER_STATE_END_ELEMENT_TAG);
}else{
//set the next possible state
setScannerState(SCANNER_STATE_CONTENT);
}
return XMLEvent.START_ELEMENT ;
}
case SCANNER_STATE_CHARACTER_DATA: {
if(DEBUG_COALESCE){
System.out.println("fLastSectionWasCData = " + fLastSectionWasCData);
System.out.println("fIsCoalesce = " + fIsCoalesce);
}
//if last section was either entity reference or cdata or character data we should be using buffer
fUsebuffer = fLastSectionWasEntityReference || fLastSectionWasCData || fLastSectionWasCharacterData ;
//When coalesce is set to true and last state was REFERENCE or CDATA or CHARACTER_DATA, buffer should not be cleared.
if( fIsCoalesce && (fLastSectionWasEntityReference || fLastSectionWasCData || fLastSectionWasCharacterData) ){
fLastSectionWasEntityReference = false;
fLastSectionWasCData = false;
fLastSectionWasCharacterData = true ;
fUsebuffer = true;
}else{
//clear the buffer
fContentBuffer.clear();
}
//set the fTempString length to 0 before passing it on to scanContent
//scanContent sets the correct co-ordinates as per the content read
fTempString.length = 0;
int c = fEntityScanner.scanContent(fTempString);
if(DEBUG){
System.out.println("fTempString = " + fTempString);
}
if(fEntityScanner.skipChar('<')){
//check if we have reached end of element
if(fEntityScanner.skipChar('/')){
//increase the mark up depth
fMarkupDepth++;
fLastSectionWasCharacterData = false;
setScannerState(SCANNER_STATE_END_ELEMENT_TAG);
//check if its start of new element
}else if(XMLChar.isNameStart(fEntityScanner.peekChar())){
fMarkupDepth++;
fLastSectionWasCharacterData = false;
setScannerState(SCANNER_STATE_START_ELEMENT_TAG);
}else{
setScannerState(SCANNER_STATE_START_OF_MARKUP);
//there can be cdata ahead if coalesce is true we should call again
if(fIsCoalesce){
fUsebuffer = true;
fLastSectionWasCharacterData = true;
fContentBuffer.append(fTempString);
fTempString.length = 0;
continue;
}
}
//in case last section was either entity reference or cdata or character data -- we should be using buffer
if(fUsebuffer){
fContentBuffer.append(fTempString);
fTempString.length = 0;
}
if(DEBUG){
System.out.println("NOT USING THE BUFFER, STRING = " + fTempString.toString());
}
//check limit before returning event
checkLimit(fContentBuffer);
if(dtdGrammarUtil!= null && dtdGrammarUtil.isIgnorableWhiteSpace(fContentBuffer)){
if(DEBUG)System.out.println("Return SPACE EVENT");
return XMLEvent.SPACE;
}else
return XMLEvent.CHARACTERS;
} else{
fUsebuffer = true ;
if(DEBUG){
System.out.println("fContentBuffer = " + fContentBuffer);
System.out.println("fTempString = " + fTempString);
}
fContentBuffer.append(fTempString);
fTempString.length = 0;
}
if (c == '\r') {
if(DEBUG){
System.out.println("'\r' character found");
}
// happens when there is the character reference
//xxx: We know the next chracter.. we should just skip it and add ']' directlry
fEntityScanner.scanChar();
fUsebuffer = true;
fContentBuffer.append((char)c);
c = -1 ;
} else if (c == ']') {
//fStringBuffer.clear();
//xxx: We know the next chracter.. we should just skip it and add ']' directlry
fUsebuffer = true;
fContentBuffer.append((char)fEntityScanner.scanChar());
// remember where we are in case we get an endEntity before we
// could flush the buffer out - this happens when we're parsing an
// entity which ends with a ]
fInScanContent = true;
// We work on a single character basis to handle cases such as:
// ']]]>' which we might otherwise miss.
//
if (fEntityScanner.skipChar(']')) {
fContentBuffer.append(']');
while (fEntityScanner.skipChar(']')) {
fContentBuffer.append(']');
}
if (fEntityScanner.skipChar('>')) {
reportFatalError("CDEndInContent", null);
}
}
c = -1 ;
fInScanContent = false;
}
do{
//xxx: we should be using only one buffer..
// we need not to grow the buffer only when isCoalesce() is not true;
if (c == '<') {
fEntityScanner.scanChar();
setScannerState(SCANNER_STATE_START_OF_MARKUP);
break;
}//xxx what should be the behavior if entity reference is present in the content ?
else if (c == '&') {
fEntityScanner.scanChar();
setScannerState(SCANNER_STATE_REFERENCE);
break;
}///xxx since this part is also characters, it should be merged...
else if (c != -1 && isInvalidLiteral(c)) {
if (XMLChar.isHighSurrogate(c)) {
// special case: surrogates
scanSurrogates(fContentBuffer) ;
setScannerState(SCANNER_STATE_CONTENT);
} else {
reportFatalError("InvalidCharInContent",
new Object[] {
Integer.toString(c, 16)});
fEntityScanner.scanChar();
}
break;
}
//xxx: scanContent also gives character callback.
c = scanContent(fContentBuffer) ;
//we should not be iterating again if fIsCoalesce is not set to true
if(!fIsCoalesce){
setScannerState(SCANNER_STATE_CONTENT);
break;
}
}while(true);
//if (fDocumentHandler != null) {
// fDocumentHandler.characters(fContentBuffer, null);
//}
if(DEBUG)System.out.println("USING THE BUFFER, STRING START=" + fContentBuffer.toString() +"=END");
//if fIsCoalesce is true there might be more data so call fDriver.next()
if(fIsCoalesce){
fLastSectionWasCharacterData = true ;
continue;
}else{
//check limit before returning event
checkLimit(fContentBuffer);
if(dtdGrammarUtil!= null && dtdGrammarUtil.isIgnorableWhiteSpace(fContentBuffer)){
if(DEBUG)System.out.println("Return SPACE EVENT");
return XMLEvent.SPACE;
} else
return XMLEvent.CHARACTERS ;
}
}
case SCANNER_STATE_END_ELEMENT_TAG :{
if(fEmptyElement){
//set it back to false.
fEmptyElement = false;
setScannerState(SCANNER_STATE_CONTENT);
//check the case when there is comment after single element document
//<foo/> and some comment after this
return (fMarkupDepth == 0 && elementDepthIsZeroHook() ) ? XMLEvent.END_ELEMENT : XMLEvent.END_ELEMENT ;
} else if(scanEndElement() == 0) {
//It is last element of the document
if (elementDepthIsZeroHook()) {
//if element depth is zero , it indicates the end of the document
//the state shouldn't be set, because it is set by elementDepthIsZeroHook() function
//xxx understand this point once again..
return XMLEvent.END_ELEMENT ;
}
}
setScannerState(SCANNER_STATE_CONTENT);
return XMLEvent.END_ELEMENT ;
}
case SCANNER_STATE_COMMENT: { //SCANNER_STATE_COMMENT:
scanComment();
setScannerState(SCANNER_STATE_CONTENT);
return XMLEvent.COMMENT;
//break;
}
case SCANNER_STATE_PI:{ //SCANNER_STATE_PI: {
//clear the buffer first
fContentBuffer.clear() ;
//xxx: which buffer should be passed. Ideally we shouldn't have
//more than two buffers --
//xxx: where should we add the switch for buffering.
scanPI(fContentBuffer);
setScannerState(SCANNER_STATE_CONTENT);
return XMLEvent.PROCESSING_INSTRUCTION;
//break;
}
case SCANNER_STATE_CDATA :{ //SCANNER_STATE_CDATA: {
//xxx: What if CDATA is the first event
//<foo><>]]>append
//we should not clear the buffer only when the last state was either SCANNER_STATE_REFERENCE or
//SCANNER_STATE_CHARACTER_DATA or SCANNER_STATE_REFERENCE
if(fIsCoalesce && ( fLastSectionWasEntityReference || fLastSectionWasCData || fLastSectionWasCharacterData)){
fLastSectionWasCData = true ;
fLastSectionWasEntityReference = false;
fLastSectionWasCharacterData = false;
}//if we dont need to coalesce clear the buffer
else{
fContentBuffer.clear();
}
fUsebuffer = true;
//CDATA section is completely read in all the case.
scanCDATASection(fContentBuffer , true);
setScannerState(SCANNER_STATE_CONTENT);
//1. if fIsCoalesce is set to true we set the variable fLastSectionWasCData to true
//and just call fDispatche.next(). Since we have set the scanner state to
//SCANNER_STATE_CONTENT (super state) parser will automatically recover and
//behave appropriately. When isCoalesce is set to true we dont need to reportCDATA event
//2. Check if application has set for reporting CDATA event
//3. if the application has neither set the fIsCoalesce to true nor fReportCdataEvent
//return the cdata event as characters.
if(fIsCoalesce){
fLastSectionWasCData = true ;
//there might be more data to coalesce.
continue;
}else if(fReportCdataEvent){
return XMLEvent.CDATA;
} else{
return XMLEvent.CHARACTERS;
}
}
case SCANNER_STATE_REFERENCE :{
fMarkupDepth++;
foundBuiltInRefs = false;
//we should not clear the buffer only when the last state was either CDATA or
//SCANNER_STATE_CHARACTER_DATA or SCANNER_STATE_REFERENCE
if(fIsCoalesce && ( fLastSectionWasEntityReference || fLastSectionWasCData || fLastSectionWasCharacterData)){
//fLastSectionWasEntityReference or fLastSectionWasCData are only
//used when fIsCoalesce is set to true.
fLastSectionWasEntityReference = true ;
fLastSectionWasCData = false;
fLastSectionWasCharacterData = false;
}//if we dont need to coalesce clear the buffer
else{
fContentBuffer.clear();
}
fUsebuffer = true ;
//take care of character reference
if (fEntityScanner.skipChar('#')) {
scanCharReferenceValue(fContentBuffer, null);
fMarkupDepth--;
if(!fIsCoalesce){
setScannerState(SCANNER_STATE_CONTENT);
return XMLEvent.CHARACTERS;
}
} else {
// this function also starts new entity
scanEntityReference(fContentBuffer);
//if there was built-in entity reference & coalesce is not true
//return CHARACTERS
if(fScannerState == SCANNER_STATE_BUILT_IN_REFS && !fIsCoalesce){
setScannerState(SCANNER_STATE_CONTENT);
return XMLEvent.CHARACTERS;
}
//if there was a text declaration, call next() it will be taken care.
if(fScannerState == SCANNER_STATE_TEXT_DECL){
fLastSectionWasEntityReference = true ;
continue;
}
if(fScannerState == SCANNER_STATE_REFERENCE){
setScannerState(SCANNER_STATE_CONTENT);
if (fReplaceEntityReferences && fEntityStore.isDeclaredEntity(fCurrentEntityName)) {
// Skip the entity reference, we don't care
continue;
}
return XMLEvent.ENTITY_REFERENCE;
}
}
//Wether it was character reference, entity reference or built-in entity
//set the next possible state to SCANNER_STATE_CONTENT
setScannerState(SCANNER_STATE_CONTENT);
fLastSectionWasEntityReference = true ;
continue;
}
case SCANNER_STATE_TEXT_DECL: {
// scan text decl
if (fEntityScanner.skipString("<?xml")) {
fMarkupDepth++;
// NOTE: special case where entity starts with a PI
// whose name starts with "xml" (e.g. "xmlfoo")
if (isValidNameChar(fEntityScanner.peekChar())) {
fStringBuffer.clear();
fStringBuffer.append("xml");
if (fNamespaces) {
while (isValidNCName(fEntityScanner.peekChar())) {
fStringBuffer.append((char)fEntityScanner.scanChar());
}
} else {
while (isValidNameChar(fEntityScanner.peekChar())) {
fStringBuffer.append((char)fEntityScanner.scanChar());
}
}
String target = fSymbolTable.addSymbol(fStringBuffer.ch, fStringBuffer.offset, fStringBuffer.length);
fContentBuffer.clear();
scanPIData(target, fContentBuffer);
}
// standard text declaration
else {
//xxx: this function gives callback
scanXMLDeclOrTextDecl(true);
}
}
// now that we've straightened out the readers, we can read in chunks:
fEntityManager.fCurrentEntity.mayReadChunks = true;
setScannerState(SCANNER_STATE_CONTENT);
//xxx: we don't return any state, so how do we get to know about TEXT declarations.
//it seems we have to careful when to allow function issue a callback
//and when to allow adapter issue a callback.
continue;
}
case SCANNER_STATE_ROOT_ELEMENT: {
if (scanRootElementHook()) {
fEmptyElement = true;
//rest would be taken care by fTrailingMiscDriver set by scanRootElementHook
return XMLEvent.START_ELEMENT;
}
setScannerState(SCANNER_STATE_CONTENT);
return XMLEvent.START_ELEMENT ;
}
case SCANNER_STATE_CHAR_REFERENCE : {
fContentBuffer.clear();
scanCharReferenceValue(fContentBuffer, null);
fMarkupDepth--;
setScannerState(SCANNER_STATE_CONTENT);
return XMLEvent.CHARACTERS;
}
default:
throw new XNIException("Scanner State " + fScannerState + " not Recognized ");
}//switch
}
// premature end of file
catch (EOFException e) {
endOfFileHook(e);
return -1;
}
} //while loop
}//next
/**
* Add the count of the content buffer and check if the accumulated
* value exceeds the limit
* @param buffer content buffer
*/
protected void checkLimit(XMLStringBuffer buffer) {
if (fLimitAnalyzer.isTracking(fCurrentEntityName)) {
fLimitAnalyzer.addValue(Limit.GENERAL_ENTITY_SIZE_LIMIT, fCurrentEntityName, buffer.length);
if (fSecurityManager.isOverLimit(Limit.GENERAL_ENTITY_SIZE_LIMIT, fLimitAnalyzer)) {
fSecurityManager.debugPrint(fLimitAnalyzer);
reportFatalError("MaxEntitySizeLimit", new Object[]{fCurrentEntityName,
fLimitAnalyzer.getValue(Limit.GENERAL_ENTITY_SIZE_LIMIT),
fSecurityManager.getLimit(Limit.GENERAL_ENTITY_SIZE_LIMIT),
fSecurityManager.getStateLiteral(Limit.GENERAL_ENTITY_SIZE_LIMIT)});
}
if (fSecurityManager.isOverLimit(Limit.TOTAL_ENTITY_SIZE_LIMIT, fLimitAnalyzer)) {
fSecurityManager.debugPrint(fLimitAnalyzer);
reportFatalError("TotalEntitySizeLimit",
new Object[]{fLimitAnalyzer.getTotalValue(Limit.TOTAL_ENTITY_SIZE_LIMIT),
fSecurityManager.getLimit(Limit.TOTAL_ENTITY_SIZE_LIMIT),
fSecurityManager.getStateLiteral(Limit.TOTAL_ENTITY_SIZE_LIMIT)});
}
}
}
//
// Protected methods
//
// hooks
// NOTE: These hook methods are added so that the full document
// scanner can share the majority of code with this class.
/**
* Scan for DOCTYPE hook. This method is a hook for subclasses
* to add code to handle scanning for a the "DOCTYPE" string
* after the string "<!" has been scanned.
*
* @return True if the "DOCTYPE" was scanned; false if "DOCTYPE"
* was not scanned.
*/
protected boolean scanForDoctypeHook()
throws IOException, XNIException {
return false;
} // scanForDoctypeHook():boolean
/**
* Element depth iz zero. This methos is a hook for subclasses
* to add code to handle when the element depth hits zero. When
* scanning a document fragment, an element depth of zero is
* normal. However, when scanning a full XML document, the
* scanner must handle the trailing miscellanous section of
* the document after the end of the document's root element.
*
* @return True if the caller should stop and return true which
* allows the scanner to switch to a new scanning
* driver. A return value of false indicates that
* the content driver should continue as normal.
*/
protected boolean elementDepthIsZeroHook()
throws IOException, XNIException {
return false;
} // elementDepthIsZeroHook():boolean
/**
* Scan for root element hook. This method is a hook for
* subclasses to add code that handles scanning for the root
* element. When scanning a document fragment, there is no
* "root" element. However, when scanning a full XML document,
* the scanner must handle the root element specially.
*
* @return True if the caller should stop and return true which
* allows the scanner to switch to a new scanning
* driver. A return value of false indicates that
* the content driver should continue as normal.
*/
protected boolean scanRootElementHook()
throws IOException, XNIException {
return false;
} // scanRootElementHook():boolean
/**
* End of file hook. This method is a hook for subclasses to
* add code that handles the end of file. The end of file in
* a document fragment is OK if the markup depth is zero.
* However, when scanning a full XML document, an end of file
* is always premature.
*/
protected void endOfFileHook(EOFException e)
throws IOException, XNIException {
// NOTE: An end of file is only only an error if we were
// in the middle of scanning some markup. -Ac
if (fMarkupDepth != 0) {
reportFatalError("PrematureEOF", null);
}
} // endOfFileHook()
} // class FragmentContentDriver
static void pr(String str) {
System.out.println(str) ;
}
protected boolean fUsebuffer ;
/** this function gets an XMLString (which is used to store the attribute value) from the special pool
* maintained for attributes.
* fAttributeCacheUsedCount tracks the number of attributes that has been consumed from the pool.
* if all the attributes has been consumed, it adds a new XMLString inthe pool and returns the same
* XMLString.
*
* @return XMLString XMLString used to store an attribute value.
*/
protected XMLString getString(){
if(fAttributeCacheUsedCount < initialCacheCount || fAttributeCacheUsedCount < attributeValueCache.size()){
return (XMLString)attributeValueCache.get(fAttributeCacheUsedCount++);
} else{
XMLString str = new XMLString();
fAttributeCacheUsedCount++;
attributeValueCache.add(str);
return str;
}
}
/**
* Implements XMLBufferListener interface.
*/
public void refresh(){
refresh(0);
}
/**
* receives callbacks from {@link XMLEntityReader } when buffer
* is being changed.
* @param refreshPosition
*/
public void refresh(int refreshPosition){
//If you are reading attributes and you got a callback
//cache available attributes.
if(fReadingAttributes){
fAttributes.refresh();
}
if(fScannerState == SCANNER_STATE_CHARACTER_DATA){
//since fTempString directly matches to the underlying main buffer
//store the data into buffer
fContentBuffer.append(fTempString);
//clear the XMLString so that data can't be added again.
fTempString.length = 0;
fUsebuffer = true;
}
}
} // class XMLDocumentFragmentScannerImpl
Other Java examples (source code examples)Here is a short list of links related to this Java XMLDocumentFragmentScannerImpl.java source code file: |
The search page
Other Java source code examples at this package level
Click here to learn more about this project
