Java example source code file (TargetDataLine.java)

This example Java source code file (TargetDataLine.java) is included in the alvinalexander.com "Java Source Code Warehouse" project. The intent of this project is to help you "Learn Java by Example" ^TM.

Learn more about this Java project at its project page.

Java - Java tags/keywords

dataline, lineunavailableexception, targetdataline

The TargetDataLine.java Java example source code

/*
 * Copyright (c) 1999, 2003, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */

package javax.sound.sampled;

/**
 * A target data line is a type of <code>{@link DataLine} from which
 * audio data can be read.  The most common example is a data line that gets
 * its data from an audio capture device.  (The device is implemented as a
 * mixer that writes to the target data line.)
 * <p>
 * Note that the naming convention for this interface reflects the relationship
 * between the line and its mixer.  From the perspective of an application,
 * a target data line may act as a source for audio data.
 * <p>
 * The target data line can be obtained from a mixer by invoking the
 * <code>{@link Mixer#getLine getLine}
 * method of <code>Mixer with an appropriate
 * <code>{@link DataLine.Info} object.
 * <p>
 * The <code>TargetDataLine interface provides a method for reading the
 * captured data from the target data line's buffer.Applications
 * that record audio should read data from the target data line quickly enough
 * to keep the buffer from overflowing, which could cause discontinuities in
 * the captured data that are perceived as clicks.  Applications can use the
 * <code>{@link DataLine#available available} method defined in the
 * <code>DataLine interface to determine the amount of data currently
 * queued in the data line's buffer.  If the buffer does overflow,
 * the oldest queued data is discarded and replaced by new data.
 *
 * @author Kara Kytle
 * @see Mixer
 * @see DataLine
 * @see SourceDataLine
 * @since 1.3
 */
public interface TargetDataLine extends DataLine {


    /**
     * Opens the line with the specified format and requested buffer size,
     * causing the line to acquire any required system resources and become
     * operational.
     * <p>
     * The buffer size is specified in bytes, but must represent an integral
     * number of sample frames.  Invoking this method with a requested buffer
     * size that does not meet this requirement may result in an
     * IllegalArgumentException.  The actual buffer size for the open line may
     * differ from the requested buffer size.  The value actually set may be
     * queried by subsequently calling <code>{@link DataLine#getBufferSize}
     * <p>
     * If this operation succeeds, the line is marked as open, and an
     * <code>{@link LineEvent.Type#OPEN OPEN} event is dispatched to the
     * line's listeners.
     * <p>
     * Invoking this method on a line that is already open is illegal
     * and may result in an <code>IllegalStateException.
     * <p>
     * Some lines, once closed, cannot be reopened.  Attempts
     * to reopen such a line will always result in a
     * <code>LineUnavailableException.
     *
     * @param format the desired audio format
     * @param bufferSize the desired buffer size, in bytes.
     * @throws LineUnavailableException if the line cannot be
     * opened due to resource restrictions
     * @throws IllegalArgumentException if the buffer size does not represent
     * an integral number of sample frames,
     * or if <code>format is not fully specified or invalid
     * @throws IllegalStateException if the line is already open
     * @throws SecurityException if the line cannot be
     * opened due to security restrictions
     *
     * @see #open(AudioFormat)
     * @see Line#open
     * @see Line#close
     * @see Line#isOpen
     * @see LineEvent
     */
    public void open(AudioFormat format, int bufferSize) throws LineUnavailableException;


    /**
     * Opens the line with the specified format, causing the line to acquire any
     * required system resources and become operational.
     *
     * <p>
     * The implementation chooses a buffer size, which is measured in bytes but
     * which encompasses an integral number of sample frames.  The buffer size
     * that the system has chosen may be queried by subsequently calling <code>{@link DataLine#getBufferSize}
     * <p>
     * If this operation succeeds, the line is marked as open, and an
     * <code>{@link LineEvent.Type#OPEN OPEN} event is dispatched to the
     * line's listeners.
     * <p>
     * Invoking this method on a line that is already open is illegal
     * and may result in an <code>IllegalStateException.
     * <p>
     * Some lines, once closed, cannot be reopened.  Attempts
     * to reopen such a line will always result in a
     * <code>LineUnavailableException.
     *
     * @param format the desired audio format
     * @throws LineUnavailableException if the line cannot be
     * opened due to resource restrictions
     * @throws IllegalArgumentException if <code>format
     * is not fully specified or invalid
     * @throws IllegalStateException if the line is already open
     * @throws SecurityException if the line cannot be
     * opened due to security restrictions
     *
     * @see #open(AudioFormat, int)
     * @see Line#open
     * @see Line#close
     * @see Line#isOpen
     * @see LineEvent
     */
    public void open(AudioFormat format) throws LineUnavailableException;


    /**
     * Reads audio data from the data line's input buffer.   The requested
     * number of bytes is read into the specified array, starting at
     * the specified offset into the array in bytes.  This method blocks until
     * the requested amount of data has been read.  However, if the data line
     * is closed, stopped, drained, or flushed before the requested amount has
     * been read, the method no longer blocks, but returns the number of bytes
     * read thus far.
     * <p>
     * The number of bytes that can be read without blocking can be ascertained
     * using the <code>{@link DataLine#available available} method of the
     * <code>DataLine interface.  (While it is guaranteed that
     * this number of bytes can be read without blocking, there is no guarantee
     * that attempts to read additional data will block.)
     * <p>
     * The number of bytes to be read must represent an integral number of
     * sample frames, such that:
     * <br>
     * <center>[ bytes read ] % [frame size in bytes ] == 0
     * <br>
     * The return value will always meet this requirement.  A request to read a
     * number of bytes representing a non-integral number of sample frames cannot
     * be fulfilled and may result in an IllegalArgumentException.
     *
     * @param b a byte array that will contain the requested input data when
     * this method returns
     * @param off the offset from the beginning of the array, in bytes
     * @param len the requested number of bytes to read
     * @return the number of bytes actually read
     * @throws IllegalArgumentException if the requested number of bytes does
     * not represent an integral number of sample frames.
     * or if <code>len is negative.
     * @throws ArrayIndexOutOfBoundsException if <code>off is negative,
     * or <code>off+len is greater than the length of the array
     * <code>b.
     *
     * @see SourceDataLine#write
     * @see DataLine#available
     */
    public int read(byte[] b, int off, int len);

    /**
     * Obtains the number of sample frames of audio data that can be read from
     * the target data line without blocking.  Note that the return value
     * measures sample frames, not bytes.
     * @return the number of sample frames currently available for reading
     * @see SourceDataLine#availableWrite
     */
    //public int availableRead();
}